Prediction of the LISA-Pathfinder release mechanism in-flight performance

In the LISA Pathfinder mission, the grabbing positioning and release mechanism will perform a critical phase, which is the injection of a test mass into a perfect free-fall condition (also called geodesic trajectory). A possible failure is the test mass remaining adhered to the mechanism or released with an excessive velocity, which would hinder the subsequent capacitive control to the desired geodesic status.     

In-flight testing of the injection of the LISA Pathfinder test mass into a geodesic

LISA Pathfinder is a technology demonstrator space mission, aimed at testing key technologies for detecting gravitational waves in space. The mission is the precursor of LISA, the first space gravitational waves observatory, whose launch is scheduled for 2034. The LISA Pathfinder scientific payload includes two gravitational reference sensors (GRSs), each one containing a test mass (TM), which is the sensing body of the experiment. A mission critical task is to set each TM into a pure geodesic motion, i.e. guaranteeing an extremely low acceleration noise in the sub-Hertz frequency bandwidth. The grabbing positioning and release mechanism (GPRM), responsible for the injection of the TM into a geodesic trajectory, was widely tested on ground, with the limitations imposed by the 1-g environment. The experiments showed that the mechanism, working in its nominal conditions, is capable of releasing the TM into free-fall fulfilling the very strict constraint imposed on the TM residual velocity, in order to allow its capture on behalf of the electrostatic actuation.However, the first in-flight releases produced unexpected residual velocity components, for both the TMs. Moreover, all the residual velocity components were greater than maximum value set by the requirements. The main suspect is that unexpected contacts took place between the TM and the surroundings bodies. As a consequence, ad hoc manual release procedures had to be adopted for the few following injections performed during the nominal mission. These procedures still resulted in non compliant TM states which were captured only after impacts. However, such procedures seem not practicable for LISA, both for the limited repeatability of the system and for the unmanageable time lag of the telemetry/telecommand signals (about 4400 s). For this reason, at the end of the mission, the GPRM was deeply tested in-flight, performing a large number of releases, according to different strategies. The tests were carried out in order to understand the unexpected dynamics and limit its effects on the final injection. Some risk mitigation maneuvers have been tested aimed at minimizing the vibration of the system at the release and improving the alignment between the mechanism and the TM. However, no overall optimal release strategy to be implemented in LISA could be found, because the two GPRMs behaved differently.     

RadioAstron orbit determination and evaluation of its results using correlation of space-VLBI observations

A crucial part of a space mission for very-long baseline interferometery (VLBI), which is the technique capable of providing the highest resolution images in astronomy, is orbit determination of the mission’s space radio telescope(s). In order to successfully detect interference fringes that result from correlation of the signals recorded by a ground-based and a space-borne radio telescope, the propagation delays experienced in the near-Earth space by radio waves emitted by the source and the relativity effects on each telescope’s clock need to be evaluated, which requires accurate knowledge of position and velocity of the space radio telescope. In this paper we describe our approach to orbit determination (OD) of the RadioAstron spacecraft of the RadioAstron space-VLBI mission. Determining RadioAstron’s orbit is complicated due to several factors: strong solar radiation pressure, a highly eccentric orbit, and frequent orbit perturbations caused by the attitude control system. We show that in order to maintain the OD accuracy required for processing space-VLBI observations at cm-wavelengths it is required to take into account the additional data on thruster firings, reaction wheel rotation rates, and attitude of the spacecraft. We also investigate into using the unique orbit data available only for a space-VLBI spacecraft, i.e. the residual delays and delay rates that result from VLBI data processing, as a means to evaluate the achieved OD accuracy. We present the results of the first experience of OD accuracy evaluation of this kind, using more than 5000 residual values obtained as a result of space-VLBI observations performed over 7 years of the RadioAstron mission operations.     

Validation of the in-flight calibration procedures for the MICROSCOPE space mission

The MICROSCOPE space mission aims to test the Equivalence Principle with an accuracy of 10^-15${10}^{-15}$. The drag-free micro-satellite will orbit around the Earth and embark a differential electrostatic accelerometer including two cylindrical test masses submitted to the same gravitational field and made of different materials. The experience consists in testing the equality of the electrostatic acceleration applied to the masses to maintain them relatively motionless. The accuracy of the measurements exploited for the test of the Equivalence Principle is limited by our a priori knowledge of several physical parameters of the instrument. These parameters are partially estimated on-ground, but with an insufficient accuracy, and an in-orbit calibration is therefore required to correct the measurements. The calibration procedures have been defined and their analytical performances have been evaluated. In addition, a simulator software including the dynamics model of the instrument, the satellite drag-free system and the perturbing environment has been developed to numerically validate the analytical results. After an overall presentation of the MICROSCOPE mission, this paper will describe the calibration procedures and focus on the simulator. Such an in-flight calibration is mandatory for similar space missions taking advantage of a drag-free system.     

蠕动掘进潜入式行星探测装置方案设计研究

针对在地外星体较大深度处长期地实施地质科学探测这一新的研究难题,运用无人自动潜入式探测原理,提出了蠕动掘进潜入式行星探测装置的设计方案,并重点对探测装置的机构设计开展了研究;成功研制出蠕动掘进潜入式探测装置试验样机及其性能测试平台,为蠕动掘进潜入式行星探测装置方案的可行性验证以及性能测试奠定技术基础。研制的蠕动掘进潜入式行星探测装置对我国未来的行星探测任务具有借鉴意义。     

The determination for ideal release point of test masses in drag-free satellites for the detection of gravitational waves

Gravitational waves are ripples in space–time predicted by Albert Einstein's general relativity and provide a new way to understand the universe. Space-borne detectors of gravitational waves, extending to very large scales, can effectively detect the middle and low-frequency gravitational wave source with the frequency band of 0.1 mHz–1 Hz. The test masses are used to make an inertial reference point in the detection of gravitational waves. Currently, there are few studies concerning the ideal release position for the test masses in the detection of gravitational waves. In this study, we give a general solution for test mass release points to minimize the relative motion between the test mass and the satellite mass center. Moreover, we discuss the situation when the release point equation is not satisfied, and the ideal release point of the along-track. Finally, we report on simulations that verify the accuracy of the theoretical derivation.     

一种探月任务多窗口发射轨道设计方法

针对探月任务多窗口发射需求和目标轨道受到明显月球引力摄动的特点,提出一种快速高效的发射轨道设计方法：在星箭分离前的发射段,各发射窗口对应的发射轨道的一、二级飞行段完全相同,仅调整三级工作段程序角和无动力滑行时间,以满足入轨要求;在末级排放段,微调末级速度方向,利用月球摄动抬高末级近地点高度,使之超过GEO受保护区。该方法可统一火箭一、二级飞行段状态,缩小子级残骸落区范围,增强入轨参数设计的灵活性,显著提高星箭入轨参数迭代和相关分析工作的效率,明显改善末级离轨效果,符合空间安全相关要求,可推广应用于其他深空探测任务的多窗口发射轨道设计。     

X-ray timing beyond the Rossi X-ray Timing Explorer

With its ability to look at bright galactic X-ray sources with sub-millisecond time resolution, the Rossi X-ray Timing Explorer (RXTE) discovered that the X-ray emission from accreting compact stars shows quasi-periodic oscillations on the dynamical timescales of the strong field region. RXTE showed also that waveform fitting of the oscillations resulting from hot spots at the surface of rapidly rotating neutron stars constrain their masses and radii. These two breakthroughs suddenly opened up a new window on fundamental physics, by providing new insights on strong gravity and dense matter. Building upon the RXTE legacy, in the Cosmic Vision exercise, testing General Relativity in the strong field limit and constraining the equation of state of dense matter were recognized recently as key goals to be pursued in the ESA science program for the years 2015–2025. This in turn identified the need for a large (10 m² class) aperture X-ray observatory. In recognition of this need, the XEUS mission concept which has evolved into a single launch L2 formation flying mission will have a fast timing instrument in the focal plane. In this paper, I will outline the unique science that will be addressed with fast X-ray timing on XEUS.     

子午工程探空火箭伸杆展开机构技术研究

根据子午工程探空火箭电子和电场探测需求,设计了套筒式伸杆展开机构.通过电子伸杆和电场伸杆的结构方案设计、力学仿真分析,伸杆单项力学试验,伸杆与整箭的匹配力学试验以及伸杆飞行试验验证得出,该伸杆技术方案合理可行,伸杆总体构型、布局设计及结构方案设计满足科学探测各项技术指标的要求.      

深远空连续推进动力与施图林格解的解析

针对太阳系远深距离的探测将是人类下一阶段深空探测活动的主要目标。这一目标的实现依赖于探测器连续推进动力技术的突破。从描述连续常值推力下太空飞行的施图林格解出发,对其中反映的深远空飞行任务有效载荷比、任务时间、飞行距离等关键参数与发动机性能之间的关系进行了深入分析。给出了在特定任务时长、特定飞行距离要求下发动机比冲、功率需要满足的条件及其对有效载荷比、最终飞行速度等指标的影响。此外,基于二体轨道动力学对太阳系行星探测的大椭圆转移轨道和转移能量进行了推导,并对连续推力的太阳帆任务方案涉及的关键技术指标做了理论性的计算。这些结论是对深空探测连续推力方案基础理论的归纳,可以为我国未来开展深远空探测活动提供重要的启发和指导。     

空间核电推进系统比质量优化建模及其木星探测应用分析

空间核电推进(Nuclear Electric Propulsion,NEP)系统是一种将核热能转换成电能,并驱动大功率电推力器而产生推力的革命性空间推进技术。和传统推进技术相比,NEP具有高比冲、大功率、长寿命等技术优势,非常适合未来大规模深空探测任务。基于NEP系统组成和小推力轨道理论,建立了以有效载荷为目标的NEP系统比质量优化模型。该模型能够解析NEP航天器的轨道运行时间、比质量、功率与有效载荷比的复杂耦合关系,为任务优化提供了计算依据。最后,利用该模型对NEP系统完成NASA "Juno号"航天任务进行了技术指标评估分析。计算表明,当NEP系统比质量达到4.8 kg/kWe时,其能将"Juno号"航天任务的地木转移时间由2 266 d缩短至665 d,有效载荷由160 kg提高到1 179 kg,极大地提高了航天器的探测能力,为任务方案的可行性论证和后续设计提供参考。     

The L5 mission for space weather forecasting

We have studied a number of interplanetary space mission scenarios for space weather research and operational forecasting experiments and concluded that a spacecraft should be deployed at the L5 point of the Sun–Earth system to enable remote sensing of the Sun and interplanetary space and in situ measurements of solar wind plasma and high energy solar particle events. The L5 point is an appropriate position for making side-view observations of geo-effective coronal mass ejections and interplanetary plasma clouds.Here, we describe briefly the mission plan and the ongoing BBM development of important subsystems such as the wide field coronal imager (WCI) and the mission processor. The WCI will have a large CCD array with 16-bit sampling, to achieve a dynamic range of several thousand in order to detect very small deviations due to plasma clouds under zodiacal light contaminations a hundred times brighter than the clouds. The L5 mission we propose will surely contribute to the construction of an international space weather observation network.     

The energy release of substorm and magnetic storm: Its present state and future improvements by KuaFu mission

Considering the KuaFu mission, state of the energy release of substorm and storm is simply presented and it’s improvements by KuaFu mission are investigated. The KuaFu mission will provide us an opportunity to improve our understanding of the energy release during the storm and the substorms. The two KuaFu-B satellites flying in 180° phase-lagged formation in a polar orbit will allow synoptic observations of the auroral oval, central plasma sheet, ring current and other regions. It can monitor the polar region 24/7 continuously. The advantage of the KuaFu mission is to provide the data during all phases of storm and substorm time that can be used to study the global energy release during all phases continuously. The data from auroral imager and other in-situ instruments on board KuaFu-B can be used to study the auroral dynamics and Joule heating during a storm and substorm. The data from the neutral atom imager instrument can be used to study the dynamics and the energy release in the ring current region from sudden commencement to complete storm recovery. Furthermore the data from KuaFu-A, which is around L1 point, can be used to study the interplanetary conditions along with the data from the plasma sheet to study the triggering process and energy release during a substorm. So, KuaFu mission with its continuous time monitoring facilities would enable us to make much progress towards solving the underlying problems.     

Recent developments in ion mass spectrometers in the energy range below 100 keV

The recognition that heavy ions often have similar or higher abundance than protons in space plasmas and the fact that ions with masses and/or charges larger than unity are ideally suited to test theories on origin, transport, acceleration, and loss of these plasmas led to the development of new and more sophisticated mass spectrometers during the last decade. The characteristics of several state-of-the-art instruments which have been flown or selected for missions will be discussed and aims for future developments will be given.     

空间计量中长度单位和距离测量

长度单位定义是建立在光直线传播、光速在真空中为常数,以及光速各向同性的理论基础上,二维球面上的直线,在三维空间中是弯曲的测地线;三维空间的直线,在四维时空中也是弯曲的测地线。长度单位的定义是否适用四维时空呢？SI秒和SI米的定义适用于全域时空,但使用它们必需明确原时和坐标时的区别。爱因斯坦的狭义相对论以及光速不变原理只适用于惯性系,不适用于非惯性系。本文以转盘上的非惯性坐标系为例,利用广义相对论的坐标变换和时空度规运算,揭示了非惯性坐标系上的时空弯曲和光的非直线传播现象。计算了非惯性坐标系上Sagnac效应对卫星和地面站双向测距的影响,初步研究表明空间测量范围从局域推广到全域的话,诸如引力红移、相对速度效应、Sagnac效应等将会成为空间长度测量不确定度的影响因素,因此空间计量理论必须建立在广义相对论基础之上,用四维时空观念理解空间距离测量问题。     

Object injection in geodesic conditions: In-flight and on-ground testing issues

In absence of forces, any object moves along the straightest possible path in space–time, called geodesic. The presence of a gravity field generates a space–time distortion that reflects on a curvature of the geodesics. Outer space yields a privileged environment to achieve high levels of geodesic purity, thanks to the absence of many non-gravitational force disturbances typical of the Earth, mainly due to the atmosphere, micro-seismic activity, stray electro-magnetic fields, etc. Many experiments in the field of Fundamental Physics, General Relativity and Earth Observation are performed through space missions, in which objects are either set in geodesic conditions or their deviation from a geodesic is measured. In both cases, stray non-gravitational forces acting on them must be reduced to a negligible level.     

低速溅射小行星表面采样的动力学仿真

开发了适用于小行星环境的大规模三维离散元程序DEMBody,针对低速射弹溅射表层风化层的小行星采样方案,仿真了相同质量不同形状的射弹在微重力环境下垂直射入颗粒床的过程,研究了溅射物质在采样器中的运动历程及最终收集质量与射弹形状的关系。结果表明,90°锥形射弹的采样效率最高。     

Finite element reconstruction approach for on-orbit spacecraft breakup dynamics simulation and fragment analysis

Breakup model is the key area of space debris environment modeling. NASA standard breakup model is currently the most widely used for general-purpose. It is a statistical model found based on space surveillance data and a few ground-based test data. NASA model takes the mass, impact velocity magnitude for input and provides the fragment size, area-to-mass ratio, velocity magnitude distributions for output. A more precise approach for spacecraft disintegration fragment analysis is presented in this paper. This approach is based on hypervelocity impact dynamics and takes the shape, material, internal structure and impact location etc. of spacecraft and impactor, which might greatly affect the fragment distribution, into consideration. The approach is a combination of finite element and particle methods, entitled finite element reconstruction (FER). By reconstructing elements from the particle debris cloud, reliable individual fragments are identified. Fragment distribution is generated with undirected graph conversion and connected component analysis. Ground-based test from literature is introduced for verification. In the simulation satellite targets and impactors are modeled in detail including the shape, material, internal structure and so on. FER output includes the total number of fragments and the mass, size and velocity vector of each fragment. The reported fragment distribution of FER shows good agreement with the test, and has good accuracy for small fragments.