基于高度分集的两波束米波雷达测高方法及其应用

米波雷达的波束较宽、由于地面反射引起波瓣分裂,通常只能估高而不能用来测高.针对这一难题本文提出一种基于高度分集的两波束米波雷达测高方法.该方法采用高度不同的两个天线,利用波瓣分裂情况及相互相位关系来测量目标高度.文章分析了此方法测高的精度及影响精度的一些因素.本测高方法已应用于某型雷达信号处理机中,并取得良好效果.     

Robust autofocus algorithm for ISAR imaging of moving targets

A robust autofocus approach, referred to as AUTOCLEAN (AUTOfocus via CLEAN), is proposed for the motion compensation in ISAR (inverse synthetic aperture radar) imaging of moving targets. It is a parametric algorithm based on a very flexible data model which takes into account arbitrary range migration and arbitrary phase errors across the synthetic aperture that may be induced by unwanted radial motion of the target as well as propagation or system instability. AUTOCLEAN can be classified as a multiple scatterer algorithm (MSA), but it differs considerably from other existing MSAs in several aspects: (1) Dominant scatterers are selected automatically in the 2D image domain; (2) scatterers may not be well isolated or very dominant; (3) phase and RCS information from each selected scatterer are combined in an optimal way; (4) the troublesome phase unwrapping step is avoided. AUTOCLEAN is computationally efficient and involves only a sequence of FFTs. Another good feature associated with AUTOCLEAN is that its performance can be progressively improved by assuming a larger number of dominant scatterers for the target. Numerical and experimental results have shown that AUTOCLEAN is a very robust autofocus tool for ISAR imaging     

High Range-Resolution Monopulse Tracking Radar

High range-resolution monopulse (HRRM) tracking radar which maintains wide instantaneous bandwidth through both range and angle error sensing channels provides range, azimuth, elevation, and amplitude for each resolved part of the target. The three-dimensional target detail can be used to improve and extend radar performance in several ways: for improved precision of target location, for target classification and recognition, to counter repeater-type ECM, to improve low-angle multipath tracking, to resolve multiple targets, as a miss-distance measurement capability, and for improved tracking in chaff and clutter. These have been demonstrated qualitatively except for the ECCM to repeater ECM and low-altitude tracking improvement. Initial results from an experimental HRRM radar with 3-ns pulse length show resolution of aircraft into its major parts and precise location of each resolved part accurately in range and angle. Realtime closed-loop tracking is performed on aircraft in flight using high-speed sampled, digitized, and processed HRRM range and angle video data. Clutter rejection capability is also demonstrated.     

应用卡尔曼滤波的机载雷达跟踪系统

本文论述将滤波理论应用于机载雷达中对单个目标进行距离、速度、方位角和高低角跟踪的多环反馈系统。首先根据目标和天线的相对运动建立控制四坐标跟踪环所需的状态矢量微分方程,然后推导相应的非线性滤波算法。最后给出计算机的模拟结果。计算机模拟的结果清晰地说明采用最佳滤波的系统性能比通常的有很大改善,并且这种瞄准轴坐标系的最佳系统对目标的随机机动是不灵敏的。 本文所讨论的方法和得出的结论可以延用到地面雷达、舰载雷达以及其他有源和无源的跟踪系统。     

Application of a Highly Parallel Processor to Radar Data Processing

The application of a highly parallel computer known as PEPE (Parallel Element Processing Ensemble) to radar data processing is described. The PEPE computer consists of a large number of identical processing elements which operate in parallel and are controlled by a common control unit. Each of the processing elements is assigned to a particular radar target such that many targets can be tracked in parallel. PEPE is designed to augment a conventional computer rather than to stand alone. The total data processing load associated with a radar tracking system is distributed between PEPE and the sequential machine in a manner than maximizes the overall system efficiency and desensitizes the system performance to fluctuations in traffic levels. The use of PEPE provides very high data processing throughput potential to a radar data processing system.     

2D雷达组网中目标高度估计误差的Cramér-Rao限

 在由2坐标雷达组成的雷达网中,推导了目标高度估计误差的CRLB(Cram&;#225;r-Rao限),并通过不同条件下的数值计算得到了一些结论。结果表明,目标高度估计误差的CRLB既与雷达的测角误差有关,也与目标和2个雷达站形成的夹角有关系,雷达配置在不同的高度上有利于目标高度估计的收敛性。这些结论对于2坐标雷达组网以及雷达网中的传感器管理具有指导意义。     

Tracking considerations in selection of radar waveform for rangeand range-rate measurements

The conventional approach for tracking system design is to treat the detection and tracking subsystems as completely independent units. However, the two subsystems can be designed jointly to improve system (tracking) performance. It is known that different radar signal waveforms result in very different resolution cell shapes (for example, a rectangle versus an eccentric parallelogram) in the range/range-rate space, and that there are corresponding differences in overall tracking performance. We develop a framework for the analysis of this performance. An imperfect detection process, false alarms, target dynamics, and the matched filter sampling grid are all accounted for, using the Markov chain approach of Li and Bar-Shalom. The role of the grid is stressed, and it is seen that the measurement-extraction process from contiguous radar "hits" is very important. A number of conclusions are given, perhaps the most interesting of which is the corroboration in the new measurement space of Fitzgerald's result for delay-only (i.e., range) measurements, that a linear FM upsweep offers very good tracking performance     

Performance analysis of a radar target discrimination technique

The performance of a radar target discrimination technique using multiple-frequency scattering amplitude without phase data is investigated. Based on the concept of natural resonance frequencies, the technique is aspect independent so that a priori information of the aspect angle is not necessary. The radar cross sections (RCSs) of spheroids are calculated numerically to simulate the received radar returns for distinguishing different spheroids and wires in the resonance frequency range by the proposed technique. By Monte Carlo simulation, the discrimination error rate is estimated as a function of the standard deviation of added noise. The numerical results show that the discrimination algorithm works well under moderately noisy situations and can be applied even in a high-resonance frequency range     

无需辅助数据的分布式目标自适应检测器

在非高斯背景和没有辅助数据的条件下,研究了高分辨率雷达分布式目标的自适应检测问题.首先采用有序检测理论和协方差矩阵的迭代估计方法粗略估计散射点集合,进一步利用迭代估计方法获得协方差矩阵的近似最大似然估计,提出了无需辅助数据的自适应检测器(ADWSD).ADWSD在非高斯背景下具有近似恒虚警率特性,且检测性能远好于修正的...     

The Series 320 Radar: Three-Dimensional Air Surveillance for the 1980s

Air surveillance radars for this decade will be required to provide reliable target location and trajectory information in height as well as the conventional geographical coordinates. These threedimensional radars will perform this task in spite of adverse environmental conditions such as ground, airborne clutter, and electromagnetic interference. The use of powerful false-alarm control processing allows automatic target detection and remoting of target information without overloading central processing capabilities. The technological evolution of the past decade has allowed sophisticated analysis, antenna/receiver/transmitter design, and signal/data processing techniques to be applied to the next generation of practical production radar systems. These radars will meet more severe performance requirements and will be significantly improved in terms of reliability, maintainability, and life cycle cost considerations. A candidate radar to fulfill the air surveillance role of this decade is the Series 320 radar manufactured by ITT Gilfillan.     

Classification of radar targets using synthetic neural networks

Radar target classification performance of neural networks is evaluated. Time-domain and frequency-domain target features are considered. The sensitivity of the neural network algorithm to changes in network topology and training noise level is examined. The problem of classifying radar targets at unknown aspect angles is considered. The performance of the neural network algorithms is compared with that of decision-theoretic classifiers. Neural networks can be effectively used as radar target classification algorithms with an expected performance within 10 dB (worst case) of the optimum classifier     

Experimental study on pulse radar target probing in RFS based on interrupted transmitting and receiving

Radar target probing and measurement are challenging tasks for Radio Frequency Simulation (RFS) with pulse radar signal. Due to the long-time duration of pulse radar signal and the limited space of anechoic chamber, the reflected signal returns before pulse radar signal is fully transmitted in RFS. As a consequence, the transmitted and reflected signals are coupled at the receiver. To handle this problem, the Interrupted Transmitting and Receiving (ITR) experiment system is constructed in this paper by dividing the pulse radar signal into sub-pulses. The target echo can be obtained by transmitting and receiving the sub-pulses intermittently. Furthermore, the principles of ITR are discussed and the target probing experiments are performed with the ITR system. It is demonstrated that the ITR system can overcome the coupling between the reflected and transmitted signals. Based on the target probing results, the performance of pulse radar target probing and measurement can be verified in RFS with the ITR system.     

SAR image formation via semiparametric spectral estimation

A new algorithm, referred to as the SPAR (Semiparametric) algorithm, is presented herein for target feature extraction and complex image formation via synthetic aperture radar (SAR). The algorithm is based on a flexible data model that models each target scatterer as a two-dimensional (2-D) complex sinusoid with arbitrary unknown amplitude and constant phase in cross-range and with constant amplitude and phase in range. By attempting to deal with one corner reflector, such as one dihedral or trihedral, at a time, the algorithm can be used to effectively mitigate the artifacts in the SAR images due to the flexible data model. Another advantage of SPAR is that it can be used to obtain initial conditions needed by other parametric target feature extraction methods to reduce the total amount of computations needed. Both numerical and experimental examples are provided to demonstrate the performance of the proposed algorithm     

Streamlining measurement iteration for EKF target tracking

The estimation problem is defined, and a review of how the linear estimation approach of Kalman filtering is extrapolated to form an extended Kalman filter (EKF), applicable for state estimation in nonlinear systems is presented. A mechanization of an EKF variation known as an iterated EKF, offering improved tracking performance, is treated. A streamlined version of an iterated EKF that has a lesser computational burden (fewer operations per cycle or time step) than prior formulations is offered. A nonlinear filtering application example, to be used as a testbed for this new approach, is described, and the detailed modeling considerations as needed for exoatmospheric random-variable radar target tracking are discussed. The performance of the streamlined mechanization is illustrated in this radar target tracking example, and comparisons are made with the performance of an EKF without measurement iteration     

Robust space-time adaptive processing for airborne radar in nonhomogeneous clutter environments

Space-time adaptive processing (STAP) holds tremendous potential for the new generation airborne surveillance radar, in which the phased array antennas and pulse Doppler processing mode are adopted. A new STAP approach using the multiple-beam and multiple Doppler channels is presented here for airborne phased array radar. The approach with space-time multiple-beam (STMB) architecture is robust to array errors and has very low system degrees of freedom (DOFs). Hence, it has low sample support requirement and it is very suitable for the practical planar phased array radar under nonhomogeneous clutter environments. Meanwhile, a new nonhomogeneous detector (NHD) based on the correlation dimension (CD) is also proposed here, which is used as an effective method to screen tracing data prior to detection processing. It can further improve the performance of the STAP approach in the severely nonhomogeneous clutter environments. Therefore, a scheme that incorporates the correlation dimension nonhomogeneity detector (CD-NHD) with the STMB is recommended, which we term CD-NHD-STMB. The experimental simulation results indicate that: 1) the STMB processor is robust to array element error and has high performance under nonhomogeneous clutter environments; 2) the CD-NHD is also effective on the nonhomogeneous clutter. As a result, the CD-NHD-STMB scheme is robust to array element error and nonhomogeneous clutter, and therefore available for airborne phased array radar applications.     

Detection of moving targets in wideband SAR

A likelihood ratio is proposed for moving target detection in a wideband (WB) synthetic aperture radar (SAR) system. WB is defined here as any systems having a large fractional bandwidth, i.e., an ultra wide frequency band combined with a wide antenna beam. The developed method combines time-domain fast backprojection SAR processing methods with moving target detection using space-time processing. The proposed method reduces computational load when sets of relative speeds can be tested using the same clutter-suppressed subaperture beams. The proposed method is tested on narrowband radar data.     

一种基于u检验的空海目标分类方法

阐述了对于机载雷达,测高精度不高,特别是对远距离目标的测高精度更差,因而利用机载雷达提供的高度信息进行空海目标分类存在很大的不确定性。为了能有效地利用目标高度信息进行空海目标分类,把空海目标分类问题看成是一个u检验问题。首先,给出了用于空海目标分类的判别函数;然后,给出了一种决策规则,并推导出决策门限的计算公式和空中目标误判为海面目标的概率的计算公式;最后,通过仿真表明该算法的简易性和有效性。     

基于Keystone变换和MDCFT的高机动弱目标检测与参数估计

 常规雷达对隐身、超声速和高机动目标存在回波信噪比不足、距离徙动和多普勒谱扩展问题。将Keystone变换和修正离散Chirp-Fourier变换(MDCFT)相结合,提出了一种新的雷达信号处理算法。该算法通过Keystone变换补偿距离徙动问题,利用MDCFT对多普勒谱严重扩展的目标回波进行相参积累,提高目标检测性能的同时完成了对目标参数的估计,且该算法在方位向欠采样时仍可适用。最后对算法运算量及性能进行了分析,通过仿真验证了该算法的有效性。