Research on Auto-detection for Remainder Particles of Aerospace Relay Based on Wavelet Analysis

Aerospace relay is one kind of electronic components which is used widely in national defense system and aerospace system. The existence of remainder particles induces the reliability declining, which has become a severe problem in the development of aerospace relay. Traditional particle impact noise detection (PIND) method for remainder detection is ineffective for small particles, due to its low precision and involvement of subjective factors. An auto-detection method for PIND output signals is proposed in this paper, which is based on direct wavelet de-noising (DWD), cross-correlation analysis (CCA) and homo-filtering (HF), the method enhances the affectiv-ity of PIND test about the small particles. In the end, some practical PIND output signals are analysed, and the validity of this new method is proved.     

Magnetic Fields in Supernova Remnants and Pulsar-Wind Nebulae

We review the observations of supernova remnants (SNRs) and pulsar-wind nebulae (PWNe) that give information on the strength and orientation of magnetic fields. Radio polarimetry gives the degree of order of magnetic fields, and the orientation of the ordered component. Many young shell supernova remnants show evidence for synchrotron X-ray emission. The spatial analysis of this emission suggests that magnetic fields are amplified by one to two orders of magnitude in strong shocks. Detection of several remnants in TeV gamma rays implies a lower limit on the magnetic-field strength (or a measurement, if the emission process is inverse-Compton upscattering of cosmic microwave background photons). Upper limits to GeV emission similarly provide lower limits on magnetic-field strengths. In the historical shell remnants, lower limits on B range from 25 to 1000?μG. Two remnants show variability of synchrotron X-ray emission with a timescale of years. If this timescale is the electron-acceleration or radiative loss timescale, magnetic fields of order 1?mG are also implied. In pulsar-wind nebulae, equipartition arguments and dynamical modeling can be used to infer magnetic-field strengths anywhere from ～5?μG to 1?mG. Polarized fractions are considerably higher than in SNRs, ranging to 50 or 60% in some cases; magnetic-field geometries often suggest a toroidal structure around the pulsar, but this is not universal. Viewing-angle effects undoubtedly play a role. MHD models of radio emission in shell SNRs show that different orientations of upstream magnetic field, and different assumptions about electron acceleration, predict different radio morphology. In the remnant of SN 1006, such comparisons imply a magnetic-field orientation connecting the bright limbs, with a substantial density gradient across the remnant.     

战斗机战术技术要求分析中全机重量计算方法研究

针对战术技术要求分析的主要问题，以飞机全机重量为核心，对全机重量的计算进行了研究，提出了空机重量和燃油重量的计算方法，得出了满意的结果。经过实际型号的验算，证明本文提出的算法，精度较高，方法可行。     

分布式接收宽带多目标信号盲检测迭代处理方法

随着软硬件技术的飞速发展和宽带接收机的广泛使用,频谱检测向着高瞬时带宽的方向发展,传统基于信道化处理的频谱检测方法存在搜索速度慢、处理效率低下的问题。文章提出了 1种新的分布式接收宽带多目标信号盲检测迭代处理方法,在无须预先知道信号数目及信号频谱位置的情况下,能够实现特定虚警概率多信号盲检测,具备较高的灵活性和稳健性。首先,在对信号特征进行分析的基础上,通过构造线性模型,将分布式接收多目标信号检测转化为线性模型求解问题进行处理;然后,基于贝叶斯多参数联合求解模型,在对未知参数先验分布进行合理假设的基础上,推导了各未知参数变分分布及信号检测门限的解析表达式,采用变分分布软信息迭代的方式实现多传感器信号、多参数联合估计,并利用每次迭代参数估计结果,对信号检测门限进行更新,通过置零操作实现预设虚警概率下的多信号盲检测;最后,通过仿真实验对所提方法性能进行了分析,并与相关方法进行了对比。仿真结果表明,所提方法能够有效利用多路接收信号信息,实现宽带未知多目标信号的盲检测,有效提升短数据下的算法处理效能,与现有方法相比,在接收单元数目较多以及信噪比较低时具有明显优势。     

宽带信号去斜脉冲压缩处理方法的研究

宽带信号广泛应用于雷达、导航和卫星通讯等领域。宽带信号的传统接收处理方法主要是采用匹配滤波或子带分割技术。本文用去斜脉冲压缩处理方法处理宽带信号,给出了具体的实现结构和改进措施,分析了如何选择系统的信号采样频率,同时还给出了脉压波形的仿真结果及性能分析。实验表明:对中心频率为9.5GHz、带宽1.3GHz、脉冲宽度30μs的宽带线性调频信号,采用该方法处理只需90MHz采样数据率,大大降低了数据采集的难度。     

航天继电器多余物颗粒碰撞噪声检测的单周期稳定性分析

航天继电器的可靠性影响着国防电子系统的可靠性,而多余物问题的预防与检测是提高航天继电器可靠性的关键因素。颗粒碰撞噪声检测(PIND)是航天继电器多余物检测的行业规范,目前缺乏对其工作机理的理论研究,其检测效果并不理想。本文从动力学的角度,建立了PIND的数学模型,推导了粒子作单周期等幅振动的必要条件和稳定性条件,并给出了相应的仿真分析。     

基于稀疏重构的混叠脉冲序列的周期估计

针对于以往方法在克服抖动大和缺失率高的混叠脉冲信号周期估计上的不足,提出了一种基于稀疏重构的混叠脉冲序列的隐藏子周期估计新方法。该方法首先针对由多个具有不同周期的脉冲串混合而成脉冲序列进行插值重采样,然后利用由Ramanujan构造的周期字典,建立了混叠脉冲序列的稀疏表示模型,最后采用联合l_2,0混合范数算法求得混叠脉冲序列的周期估计。方法的优点是具有较强抗噪能力和抗脉冲缺失能力,并且不受初相的改变影响。所需要较少的脉冲数据长度就能得到准确的周期稀疏解。仿真实验表明,所提方法具有更好的估计性能。     

复合材料紧固孔分层激光超声量化表征试验

提出解决飞机复合材料结构紧固孔分层检测问题的途径。基于激光超声技术,进行复合材料紧固孔分层的量化表征试验。制备碳纤维增强复合材料紧固孔试样,根据复合材料中激光超声的激发参量选取原则,利用材料受脉冲激光辐照作用产生的热弹效应激发超声波,提取表征紧固孔区域分层缺陷的超声信号;分析影响缺陷表征准确度的关键因素,发现脉冲激光光斑尺寸（直径1~5 mm）变化对紧固孔分层的表征不产生显著影响;基于穿透法和脉冲反射法进行激光超声C扫描检测,得到紧固孔区域分层缺陷的形状、尺寸和位置特征。研究结果表明,利用激光超声技术的非接触式激发、接收和高分辨力特点,可以准确测得紧固孔区域分层缺陷导致的波反射和衰减,有效表征飞机复合材料结构的紧固孔分层缺陷。     

基于火焰图像诊断的模型燃烧室燃烧不稳定特性

提出了一种基于火焰图像诊断的旋流燃烧室燃烧不稳定特性研究方法。分析甲基滤镜下高速CCD （charge coupled device）拍摄的火焰面振荡图像,发现不稳定工况下的旋流火焰在以较高频率抖动的同时伴随着周期性的火焰脱落,其脱落信息可由火焰面轴向峰值位置体现。对CCD图像进行数字图像处理获得轮廓线,统计其边缘轴向最远处坐标作为火焰抖动峰值位置。基于图像分析确定火焰脱落阈值,获得不同工况下火焰脱落发生时的脉冲时序信号,统计得各工况火焰脱落频率。研究发现该频率分别与火焰抖动时序、CH^*时序及燃烧室压力脉动时序信号各自3阶本征模态函数的傅里叶谱主峰值接近。在多工况下研究了不稳定火焰脱离频率在时序信号中的存在方式和规律,发现对于本模型燃烧室,火焰脱落频率随着油气比的降低而升高,在油气比约0.0096处到达火焰脱落频率临界点,之后呈现缓慢下降趋势。     

X-ray Emission From Snrs Undergoing Efficient Shock Acceleration

In nonlinear, diffusive shock acceleration, compression ratios will be higher and the shocked temperature lower than test-particle, Rankine–Hugoniot relations predict. The heating of the gas to X-ray emitting temperatures is strongly coupled to the acceleration of cosmic-ray ions. We have developed a simple hydrodynamical supernova remnant model which includes the effects of nonlinear acceleration (Berezhko and Ellison, 1999). We show how efficient particle acceleration modifies the dynamics of supernova remnants, and use the X-ray spectral data on Keplers remnant to illustrate the effects on the thermal X-ray emission, including non-equilibrium ionization effects (Decourchelle et al., 2000a).     

随机载荷谱下基于声发射的耳片接头疲劳裂纹识别方法

作为航空结构中传递集中载荷的关键部件,耳片接头的失效将会带来灾难性的后果,因此需要通过疲劳试验来验证其是否满足设计要求。声发射（AE）作为一种在线监测手段,能够及时捕捉接头裂纹萌生扩展进程,提升试验质量。然而,在随机载荷谱下,会产生大量极其复杂且毫无规律的声发射信号,致使传统的基于特征提取及参数滤波的声发射数据分析方法难以发挥作用,无法有效识别接头裂纹的萌生。因此,本文提出了一种随机载荷谱下疲劳裂纹的声发射识别方法,该方法利用随机载荷谱的分布特点,通过分析不同载荷谱块下相同循环时段所对应的声发射信号表象差异来发现、锁定异常,并结合定位分析与干扰排除分析,确定裂纹的发生时间及位置。通过疲劳试验,该方法的有效性得到了证实,因而可为随机载荷谱下的相关航空结构试验提供参考。     

基于研制信息的测试性验证试验方案研究

针对现有测试性验证试验方案需要较大故障样本量的问题,提出了一种利用研制信息制定测试性验证试验方案的新方法。首先,在二项分布经典抽样模型的基础上,运用证据理论方法,研究了基于测试性试验数据、测试性预计结果和专家经验等研制信息的基本信任分配函数的构造方法,建立了基于融合不同种类研制信息的测试性验证试验方案,并确定了该方案的存在性,给出了方案的确定方法,最后开展了案例应用研究。由于充分考虑了研制信息,因此在确保有较好的验证效果的条件下,与传统的试验方案相比,该方法可以明显减少故障样本量,或在样本量保持不变的情况下有效降低双方风险。     

基于过程功率谱熵SVM的转子振动故障诊断方法

针对旋转机械振动过程的复杂性和振动故障产生的随机性以及振动故障样本获取难的问题,在信息熵理论的基础上,融合了支持向量机(SVM)小样本、全局性和泛化性好的优点,提出了过程功率谱信息熵(功率谱熵)SVM的故障诊断方法。结合转子实验台,得到了4种典型振动故障在多测点多转速下的数据,通过计算提取了其功率谱熵特征值作为故障样本,即故障向量,并建立SVM诊断模型,对转子振动故障的类别、严重程度和部位识别诊断,验证了该方法在转子振动故障诊断方面效果良好。     

基于CPLD的多路脉冲序列信号检测器设计

用VHDL语言在CPLD器件上实现了一种多路脉冲序列信号检测器,能够用七段数码管实时显示各路已检测出序列信号数目,电路各摸块用VHDL语言来描述。文章介绍了仿真信号的形成原理和电路设计方法,并给出了部分电路和仿真波形。整个多路脉冲序列信号检测器设计在一块CPLD芯片上,与其他方法设计的序列信号检测器相比,具有体积小、可靠性高、功牦低的特点。由于采用模块化的设计,对功能的修改和增加只要修改VHDL源程序,而不必更改硬件电路,从而实现数字系统硬件的软件化。     

Asymptotic Performance of Sparse Signal Detection Using Convex Programming Method

The detection of sparse signals against background noise is considered. Detecting signals of such kind is difficult since only a small portion of the signal carries information. Prior knowledge is usually assumed to ease detection. In this paper, we consider the general unknown and arbitrary sparse signal detection problem when no prior knowledge is available. Under a Neyman-Pearson hypothesis-testing framework, a new detection scheme is proposed by combining a generalized likelihood ratio test (GLRT)-like test statistic and convex programming methods which directly exploit sparsity in an underdetermined system of linear equations. We characterize large sample behavior of the proposed method by analyzing its asymptotic performance. Specifically, we give the condition for the Chernoff-consistent detection which shows that the proposed method is very sensitive to the 2 norm energy of the sparse signals. Both the false alarm rate and the miss rate tend to zero at vanishing signal-to-noise ratio (SNR), as long as the signal energy grows at least logarithmically with the problem dimension. Next we give a large deviation analysis to characterize the error exponent for the Neyman-Pearson detection. We derive the oracle error exponent assuming signal knowledge. Then we explicitly derive the error exponent of the proposed scheme and compare it with the oracle exponent. We complement our study with numerical experiments, showing that the proposed method performs in the vicinity of the likelihood ratio test (LRT) method in the finite sample scenario and the error probability degrades exponentially with the number of observations.     

应用独立分量分析提取液体火箭发动机的故障特征

以某型液体火箭发动机为研究对象，针对故障诊断中故障特征提取难的问题，提出了应用小波消噪技术和独立分量分析获取高品质源信号，并利用源信号进行故障诊断的思路，对发动机热试车压强信号进行了实例分析。研究结果表明，该方法提高了诊断信号的质量，有效地提取了故障特征。     

过程功率谱熵在转子振动定量诊断中的应用

针对旋转机械振动过程的复杂性和振动故障产生的随机性,提出了1种以信息熵理论为基础,通过多测点、多转速下的功率谱信息熵(功率谱熵)差矩阵来描述旋转机械振动过程变化规律的故障定量诊断方法。采用在转子试验台模拟转子振动的4种典型故障,得到4个测点多转速下的振动故障数据;对这些故障数据进行分析和处理,求其功率谱熵矩阵。结果表明:通过对转子振动故障信号进行实例计算和分析,该方法在转子振动故障分类和故障严重程度判断方面效果良好。     

基于循环统计量的直升机齿轮箱轴承故障早期检测

在分析齿轮箱振动信号的基础上,提出了基于循环统计量的轴承故障早期检测方法,阐述了表征故障的一维和二维循环平稳特征。该方法利用信号与噪声具有不同循环频率的特性实现了信噪分离,能够比较容易地从复杂背景中提取出微弱的特征信息。最后在某型直升机齿轮箱轴承故障的早期检测中进行了实验验证。结果表明,该方法优于功率谱和解调分析,能够提取故障的早期特征。     

撞击流混合器内速度脉动的间歇性分析

应用激光多普勒测速仪（LDA）,对撞击流混合器的流场速度进行了实验测量。利用小波变换模极大值方法与分形理论结合,对撞击流混合器撞击区的速度脉动信号进行多重分形分析,计算其轴向和径向速度信号的间歇性指数,并与相关流动特性进行关联分析,探讨撞击流混合器撞击区非线性、非均匀性和混沌特性机理。通过分析同一转速不同位置和同一位置不同转速下的信号得出：撞击流混合器内部流体流动具有多重分形的特性,通过间歇性参数随位置变化出现的最低拐点可以判断混合器内部流体运动特征,得出流型的转变区域;转速对撞击区的影响大于对回流区的影响。为揭示撞击流混合器的流动机制提供了一种新的方法。     

Experimental study on pulse radar target probing in RFS based on interrupted transmitting and receiving

Radar target probing and measurement are challenging tasks for Radio Frequency Simulation (RFS) with pulse radar signal. Due to the long-time duration of pulse radar signal and the limited space of anechoic chamber, the reflected signal returns before pulse radar signal is fully transmitted in RFS. As a consequence, the transmitted and reflected signals are coupled at the receiver. To handle this problem, the Interrupted Transmitting and Receiving (ITR) experiment system is constructed in this paper by dividing the pulse radar signal into sub-pulses. The target echo can be obtained by transmitting and receiving the sub-pulses intermittently. Furthermore, the principles of ITR are discussed and the target probing experiments are performed with the ITR system. It is demonstrated that the ITR system can overcome the coupling between the reflected and transmitted signals. Based on the target probing results, the performance of pulse radar target probing and measurement can be verified in RFS with the ITR system.