应用iGMAS超快速星历的实时精密单点定位研究

中国主导建设的国际GNSS监测评估系统（iGMAS）相比国际上比较成熟的IGS系统在产品精度等方面存在差别，目前实时精密单点定位应用多采用IGS实时、近实时产品。为改变这一现状，针对iGMAS产品特性以及实时精密单点定位对超快速精密星历的需求，对iGMAS超快速星历的精度和稳定性方面进行评估，设计了iGMAS产品实时/事后下载应用程序，开展了基于iGMAS超快速星历的实时精密单点定位研究，并结合NovAtel OEM617双频接收机进行了GPS实时精密单点定位试验。实验结果表明，在连续观测23min后定位误差即可收敛到分米级，较接收机原始定位精度高一个量级，且稳定性好，最终在E/N/U方向定位误差均方根分别为7.2cm、6.4cm、15.2cm，与应用IGS超快速星历实时PPP试验取得相近的结果。研究实现了iGMAS数据获取、评估和实时PPP应用的一整套方案，验证了iGMAS超快速产品的性能，对推进iGMAS产品的应用提供了借鉴。     

The GFZ real-time GNSS precise positioning service system and its adaption for COMPASS

Motivated by the IGS real-time Pilot Project, GFZ has been developing its own real-time precise positioning service for various applications. An operational system at GFZ is now broadcasting real-time orbits, clocks, global ionospheric model, uncalibrated phase delays and regional atmospheric corrections for standard PPP, PPP with ambiguity fixing, single-frequency PPP and regional augmented PPP. To avoid developing various algorithms for different applications, we proposed a uniform algorithm and implemented it into our real-time software. In the new processing scheme, we employed un-differenced raw observations with atmospheric delays as parameters, which are properly constrained by real-time derived global ionospheric model or regional atmospheric corrections and by the empirical characteristics of the atmospheric delay variation in time and space. The positioning performance in terms of convergence time and ambiguity fixing depends mainly on the quality of the received atmospheric information and the spatial and temporal constraints. The un-differenced raw observation model can not only integrate PPP and NRTK into a seamless positioning service, but also syncretize these two techniques into a unique model and algorithm. Furthermore, it is suitable for both dual-frequency and sing-frequency receivers. Based on the real-time data streams from IGS, EUREF and SAPOS reference networks, we can provide services of global precise point positioning (PPP) with 5–10 cm accuracy, PPP with ambiguity-fixing of 2–5 cm accuracy, PPP using single-frequency receiver with accuracy of better than 50 cm and PPP with regional augmentation for instantaneous ambiguity resolution of 1–3 cm accuracy. We adapted the system for current COMPASS to provide PPP service. COMPASS observations from a regional network of nine stations are used for precise orbit determination and clock estimation in simulated real-time mode, the orbit and clock products are applied for real-time precise point positioning. The simulated real-time PPP service confirms that real-time positioning services of accuracy at dm-level and even cm-level is achievable with COMPASS only.     

Analysis of GNSS clock prediction performance with different interrupt intervals and application to real-time kinematic precise point positioning

Continuous and timely real-time satellite orbit and clock products are mandatory for real-time precise point positioning (RT-PPP). Real-time high-precision satellite orbit and clock products should be predicted within a short time in case of communication delay or connection breakdown in practical applications. For prediction, historical data describing the characteristics of the real-time orbit and clock can be used as the basis for performing the prediction. When historical data are scarce, it is difficult for many existing models to perform precise predictions. In this paper, a linear regression model is used to predict clock products. Seven-day GeoForschungsZentrum (GFZ) final clock products sampled at 30 s are used to analyze the characteristics of GNSS clocks. It is shown that the linear regression model can be used as the prediction model for the satellite clock products. In addition, the accuracy of the clock prediction for different satellites are analyzed using historical data with different periods (such as 2 and 10 epochs). Experimental results show that the accuracy of the clock with the linear regression prediction model using historical data with 10 epochs is 1.0 ns within 900 s. This is higher accuracy than that achieved using historical data of 2 epochs. Finally, the performance analysis for real-time kinematic precise point positioning (PPP) is provided using GFZ final clock prediction results and state space representation (SSR) clock prediction results when communication delay or connection breakdown occur. Experimental results show that the positioning accuracy without prediction is better than that with prediction in general, whether using the final clock product or the SSR clock product. For the final clock product, the positioning accuracy in the north (N), east (E), and up (U) directions is better than 10.0 cm with all visible GNSS satellites with prediction. In comparison, the 3D positioning accuracy of N, E, and U directions with visible GNSS satellites whose prediction accuracy is better than 0.1 ns using historical data of 10 epochs is improved from 15.0 cm to 7.0 cm. For the SSR clock product, the positioning accuracy of N, E, and U directions is better than 12.0 cm with visible GNSS satellites with prediction. In comparison, the 3D positioning accuracy of N, E, and U directions with visible GNSS satellites whose prediction accuracy is better than 0.1 ns using historical data of 10 epochs is improved from 12.0 cm to 9.0 cm.     

Carrier phase prediction method for GNSS precise positioning in challenging environment

Since the signals of global navigation satellite system (GNSS) are blocked frequently in challenging environments, the discontinuous carrier phases seriously affect the application of GNSS precise positioning. To improve the carrier phase continuity, this paper proposes a carrier phase prediction method based on carrier open-loop tracking. In the open-loop tracking mode, the carrier numerically controlled oscillator (NCO) is controlled by the predicted Doppler, but not by the loop filter output. To improve the phase prediction effective time, accurate receiver clock drift estimation is studied in the prediction method. The phase prediction performance is tested on GNSS software receiver. In the phase prediction effective time tests, open-loop processes were set for the tested channel. The test results show that, when some satellite signals are blocked in 15?s, the probability of carrier phase error less than quarter cycles is more than 94%. In the real time kinematic (RTK) positioning tests, some satellite signals are blocked in 10–15?s repeatedly. The test results show that, the carrier phase continuity is basically not affected by the signal interruption, and the RTK can almost keep continuous centimeter-level positioning accuracy without re-fixing the integer ambiguity.     

Performance improvement of real-time PPP ambiguity resolution using a regional integer clock

Obtaining reliable GNSS uncalibrated phase delay (UPD) or integer clock products is the key to achieving ambiguity-fixed solutions for real-time (RT) precise point positioning (PPP) users. However, due to the influence of RT orbit errors, the quality of UPD/integer clock products estimated with a globally distributed GNSS network is difficult to ensure, thereby affecting the ambiguity resolution (AR) performance of RT-PPP. In this contribution, by fully utilising the consistency of orbital errors in regional GNSS network coverage areas, a method is proposed for estimating regional integer clock products to compensate for RT orbit errors. Based on Centre National d’Études Spatiales (CNES) RT precise products, the regional GPS/BDS integer clock was estimated with a CORS network in the west of China. Results showed that the difference between the estimated regional and CNES global integer clock/bias products was generally less than 5 cm for GPS, whereas clock differences of greater than 10 cm were observed for BDS due to the large RT orbit error. Compared with PPP using global integer clock/bias products, the AR performance of PPP using the regional integer clock was obviously improved for four rover stations. For single GPS, the horizontal and vertical accuracies of ambiguity-fixed PPP solutions were improved by 56.2% and 45.3% on average, respectively, whereas improvements of 67.5% and 50.5% in the horizontal and vertical directions, respectively, were observed for the combined GPS/BDS situation. Based on a regional integer clock, the RMS error of a kinematic ambiguity-fixed PPP solution in the horizontal direction could reach 0.5 cm. In terms of initialisation time, the average time to first fix (TTFF) in combined GPS/BDS PPP was shortened from 18.2 min to 12.7 min. In view of the high AR performance realised with the use of regional integer clocks, this method can be applied to scenarios that require high positioning accuracy, such as deformation monitoring.     

基于地面移动通信基站的差分气压测高方法

为了解决现有的卫星定位系统高程定位精度较低的问题,提出利用已发展完备的地面移动通信基站作为气压差分测量基准点的差分气压测高的方法.该方法以用户接收机附近的分布密集的地面移动通信基站为气压校正基准点,并利用移动通信基站的传输链路把相关的测量数据传送给用户,用户接收机便可以用移动通信基站观测点的高程值、气压值以及温度值,结合接收机测点处的气压值和温度值,利用高程与气压值之间的对应关系,得到用户接收机处的绝对高程值.实际试验结果表明:使用本方法后,室内高程定位精度约为1 m,室外的高程定位精度优于1 m.测高分辨率约为0.2 m,可以使GNSS(Global Navigation Satellite System)的三维位置定位精度提高约60%.本方法不仅可以弥补GNSS高程精度差的缺陷,作为高程约束参与测量方程解算还会提高水平测量精度,而且还克服了传统的气压测高精度依赖于气象站,而大多数用户接收机离气象站的距离较远,造成气压测高精度偏低的局限性.所以本方法能辅助增强卫星导航系统,提高三维定位精度,用于室内定位可以解决室内楼层的分辨问题.     

An improved approach to model regional ionosphere and accelerate convergence for precise point positioning

Given the severe effects of the ionosphere on global navigation satellite system (GNSS) signals, single-frequency (SF) precise point positioning (PPP) users can only achieve decimeter-level positioning results. Ionosphere-free combinations can eliminate the majority of ionospheric delay, but increase observation noise and slow down dual-frequency (DF) PPP convergence. In this paper, we develop a regional ionosphere modeling and rapid convergence approach to improve SF PPP (SFPPP) accuracy and accelerate DF PPP (DFPPP) convergence speed. Instead of area model, ionospheric delay is modeled for each satellite to be used as a priori correction. With the ionospheric, wide-lane uncalibrated phase delay (UPD) and residuals satellite DCBs product, the wide-lane observations for DF users change to be high-precision pseudorange observations. The validation of a continuously operating reference station (CORS) network was analyzed. The experimental results confirm that the approach considerably improves the accuracy of SFPPP. For DF users, convergence time is substantially reduced.     

Evaluation of a regional real-time precise positioning system based on GPS/BeiDou observations in Australia

The performance of real-time (RT) precise positioning can be improved by utilizing observations from multiple Global Navigation Satellite Systems (GNSS) instead of one particular system. Since the end of 2012, BeiDou, independently established by China, began to provide operational services for users in the Asia-Pacific regions. In this study, a regional RT precise positioning system is developed to evaluate the performance of GPS/BeiDou observations in Australia in providing high precision positioning services for users. Fixing three hourly updated satellite orbits, RT correction messages are generated and broadcasted by processing RT observation/navigation data streams from the national network of GNSS Continuously Operating Reference Stations in Australia (AUSCORS) at the server side. At the user side, RT PPP is realized by processing RT data streams and the RT correction messages received. RT clock offsets, for which the accuracy reached 0.07 and 0.28?ns for GPS and BeiDou, respectively, can be determined. Based on these corrections, an accuracy of 12.2, 30.0 and 45.6?cm in the North, East and Up directions was achieved for the BeiDou-only solution after 30 min while the GPS-only solution reached 5.1, 15.3 and 15.5?cm for the same components at the same time. A further improvement of 43.7, 36.9 and 45.0 percent in the three directions, respectively, was achieved for the combined GPS/BeiDou solution. After the initialization process, the North, East and Up positioning accuracies were 5.2, 8.1 and 17.8?cm, respectively, for the BeiDou-only solution, while 1.5, 3.0, and 4.7?cm for the GPS-only solution. However, we only noticed a 20.9% improvement in the East direction was obtained for the GPS/BeiDou solution, while no improvements in the other directions were detected. It is expected that such improvements may become bigger with the increasing accuracy of the BeiDou-only solution.     

An iterative LiDAR DEM-aided algorithm for GNSS positioning in obstructed/rapidly undulating environments

This paper describes a new algorithm to aid stand-alone GNSS positioning in areas of bad signal reception using a Digital Elevation Model (DEM). Traditional Height-Aiding (HA) algorithms assume either a preset (fixed) value for the receiver elevation or rely on the elevation value that corresponds to the nearest available position fix. This may lead in erroneous receiver elevation estimates that, under circumstances, are inefficient to aid effectively GNSS positioning. In this study, the receiver elevation is updated at every iteration step of the navigation solution through dynamic interpolation of the elevation model. The algorithm, because of its ability to extract and fully exploit the elevation information derived from a digital model, it can prove particularly useful in forested areas with steep-sloped terrain. Extended test runs were undertaken to validate the correctness of the mathematical model and the feasibility of the algorithm and associated software. Particularly, analysis of a dataset acquired in a forested, rapidly undulating environment reveals significant average improvement in all performance metrics of positioning, namely the GNSS position availability (50%), accuracy (56%) and external reliability (86%) compared to the Standard Point Positioning (SPP) solution. Moreover, it was found that the method can cope successfully in marginal operating conditions with situations of bad satellite geometry and satellite signals affected by interference due to tree canopy.     

Mitigation of receiver biases in ionospheric observables from PPP with ambiguity resolution

PPP (Precise Point Positioning) is a GNSS (Global Navigation Satellite Systems) positioning method that requires SSR (State Space Representation) corrections in order to provide solutions with an accuracy of centimetric level. The so-called RT-PPP (Real-time PPP) is possible thanks to real-time precise SSR products, for orbits and clocks, provided by IGS (International GNSS Service) and its associate analysis centers such as CNES (Centre National d'Etudes Spatiales). CNES SSR products also enable RT-PPP with integer ambiguity resolution. In GNSS related literature, PPP with ambiguity resolution (PPP-AR) in real-time is often referred as PPP-RTK (PPP – Real Time Kinematic). PPP-WIZARD (PPP - With Integer and Zero-difference Ambiguity Resolution Demonstrator) is a software that is made available by CNES. This software is capable of performing PPP-RTK. It estimates slant ionospheric delays and other GNSS positioning parameters. Since ionospheric effects are spatially correlated by GNSS data from active networks, it is possible to model and provide ionospheric delays for any position in the network coverage area. The prior knowledge ionospheric delays can reduce positioning convergence for PPP-RTK users. Real-time ionospheric models could benefit from highly precise ionospheric delays estimated in PPP-AR. In this study, we demonstrate that ionospheric delays obtained throughout PPP-AR estimation are actu ally ionospheric observables. Ionospheric observables are biased by an order of few meters caused by the receiver hardware biases. These biases prohibit the use of PPP-WIZARD ionospheric delays to produce ionospheric models. Receiver biases correction is essential to provide ionospheric delays while using PPP-AR based ionospheric observables. In this contribution, a method was implemented to estimate and mitigate receiver hardware biases influence on slant ionospheric observables from PPP-AR. In order to assess the proposed approach, PPP-AR data from 12 GNSS stations were processed over a two-month period (March and April 2018). A comparison between IGS ionospheric products and PPP-AR based ionospheric observables corrected for receiver biases, resulted in a mean of differences of −39 cm and 51 cm standard deviation. The results are consistent with the accuracy of the IGS ionospheric products, 2–8 TECU, considering that 1 TECU is ~16 cm in L1. In another analysis, a comparison of ionospheric delays from 5 pairs of short baselines GNSS stations found an agreement of 0.001 m in mean differences with 22 cm standard deviation after receiver biases were corrected. Therefore, the proposed solution is promising and could produce high quality (1–2 TECU) slant ionospheric delays. This product can be used in a large variety of modeling approaches, since ionospheric delays after correction are unbiased. These results indicate that the proposed strategy is promising, and could benefit applications that require accuracy of 1–2 TECU (~16–32 cm in L1).     

Tight integration of BDS-3/BDS-2/GPS/Galileo observations considering the new overlapping DISBs and its application in obstructed environments

Tight integration can enhance the model strength and positioning performance by considering the characteristic of differential inter-system bias (DISB), especially in obstructed environments. However, limited work emphasizes the comprehensive analysis of five-frequency DISBs between BDS-3 and other systems considering the receiver type, receiver configuration, and antenna type. In addition, the overlapping DISBs between BDS-3 and BDS-2 are also in great demand for further investigation since they are often regarded as one system. In this study, one DISB-float model is introduced to estimate the DISBs, and one DISB-fixed model and one DISB-free model are formulated to enhance the model strength of tight integration. Four dedicated datasets were collected to estimate the DISBs, which are also comprehensively analyzed considering the receiver type, receiver configuration, and antenna type. The results show that the DISBs between BDS-3 and other systems are rather stable over a certain period and are related to the receiver type and receiver configuration, whereas are not related to the antenna type. More interestingly, the B1I code DISB between BDS-3 and BDS-2 exhibits significant magnitude with a mean value of ?1.44 m for the baseline composed of two different receivers. In this case, the B1I code DISB must be considered and the tight integration between BDS-3 and BDS-2 considering its calibration can improve the positioning performance. Besides, the tight integration of the DISB-fixed model can significantly improve the positioning accuracy between multiple GNSS. Compared to the loose integration, the improvement of 60.6 %, 56.6 %, and 61.2 % can be obtained in the E, N, and U directions, when only two satellites are available for each system. In real obstructed environments, the tight integration of the DISB-free model can also improve the positioning performance in terms of positioning availability and accuracy, as well as the ambiguity resolution performance.     

A novel predictive algorithm for double difference observations of obstructed BeiDou geostationary earth orbit (GEO) satellites

Transmission link disturbances and device failure cause global navigation satellite system (GNSS) receivers to miss observations, leading to poor accuracy in real-time kinematic (RTK) positioning. Previously described solutions for this problem are influenced by the length of the prediction period, or are unable to account for changes in receiver state because they use information from previous epochs to make predictions. We propose an algorithm for predicting double difference (DD) observations of obstructed BeiDou navigation system (BDS) GEO satellites. Our approach adopts the first-degree polynomial function for predicting missing observations. We introduce a Douglas-Peucker algorithm to judge the state of the rover receiver to reduce the impact of predictive biases. Static and kinematic experiments were carried out on BDS observations to evaluate the proposed algorithm. The results of our navigation experiment demonstrate that RTK positioning accuracy is improved from meter to decimeter level with fixed ambiguity (horizontal?<?2?cm, vertical?<?18?cm). Horizontal accuracy is improved by over 50%, and the vertical accuracies of the results of the static and kinematic experiments are increased by 47% and 27% respectively, compared with the results produced by the classical approach. Though as the baseline becomes longer, the accuracy is weakened, our predictive algorithm is an improvement over existing approaches to overcome the issue of missing data.     

A real-time combined quality control method for GNSS precise positioning in harsh environments

Global Navigation Satellite System (GNSS) precise positioning can be significantly affected by severe multipath effects and outliers in harsh environments, and highly relies on quality control strategies. Previous studies mainly focus on the posterior residuals to check and exclude the outliers in GNSS observations, limited work emphasizes the combined quality control method considering both the prior and posterior knowledge simultaneously. This paper proposed a real-time combined quality control method to process the multipath effects and outliers in harsh environments simultaneously. Specifically, in the prior stage, a modified multipath processing strategy is proposed for both phase and code observations, then a modified detection, identification, and adaptation (DIA) method considering the maximum times of data snooping is studied in the posterior stage. Two dedicated experiments in real harsh environments were carried out to evaluate the performance of the proposed combined quality control method. For the static experiment, the proposed method exhibits smaller positioning errors, the best positioning accuracy, and the highest availability in this study. Specifically, the proposed method exhibits an improved percentage of 55.4 %, 56.3 %, and 59.7 % for positioning accuracy compared to those without the quality control method in the E, N, and U directions, respectively. Besides, the proposed method can further improve the performance of ambiguity resolution with an improved percentage of 32.2 %. For the kinematic experiment, the three-dimensional positioning accuracy of the proposed method is 0.577 m, which exhibits a 40.0 % improvement compared to those without the quality control method. Also, the proposed method exhibits better performance under relatively strong multipath effects. In this sense, the proposed real-time combined quality control method is highly appreciated in terms of positioning availability, accuracy, and ambiguity resolution for GNSS precise positioning, especially in harsh environments.     

The GLONASS-M satellite yaw-attitude model

The proper modeling of the satellites’ yaw-attitude is a prerequisite for high-precision Global Navigation Satellite System (GNSS) positioning and poses a particular challenge during periods when the satellite orbital planes are partially eclipsed. Whereas a lot of effort has been put in to examine the yaw-attitude control of GPS satellites that are in eclipsing orbits, hardly anything is known about the yaw-attitude behavior of eclipsing GLONASS-M satellites. However, systematic variations of the carrier phase observation residuals in the vicinity of the orbit’s noon and midnight points of up to ±27 cm indicate significant attitude-related modeling issues. In order to explore the GLONASS-M attitude laws during eclipse seasons, we have studied the evolution of the horizontal satellite antenna offset estimates during orbit noon and orbit midnight using a technique that we refer to as “reverse kinematic precise point positioning”. In this approach, we keep all relevant global geodetic parameters fixed and estimate the satellite clock and antenna phase center positions epoch-by-epoch using 30-second observation and clock data from a global multi-GNSS ground station network. The estimated horizontal antenna phase center offsets implicitly provide the spacecraft’s yaw-attitude. The insights gained from studying the yaw angle behavior have led to the development of the very first yaw-attitude model for eclipsing GLONASS-M satellites. The derived yaw-attitude model proves to be much better than the nominal yaw-attitude model commonly being used by today’s GLONASS-capable GNSS software packages as it reduces the observation residuals of eclipsing satellites down to the normal level of non-eclipsing satellites and thereby prevents a multitude of measurements from being incorrectly identified as outliers. It facilitates continuous satellite clock estimation during eclipse and improves in particular the results of kinematic precise point positioning of ground-based receivers.     

Stochastic modelling considering ionospheric scintillation effects on GNSS relative and point positioning

Global Navigation Satellite Systems (GNSS), in particular the Global Positioning System (GPS), have been widely used for high accuracy geodetic positioning. The Least Squares functional models related to the GNSS observables have been more extensively studied than the corresponding stochastic models, given that the development of the latter is significantly more complex. As a result, a simplified stochastic model is often used in GNSS positioning, which assumes that all the GNSS observables are statistically independent and of the same quality, i.e. a similar variance is assigned indiscriminately to all of the measurements. However, the definition of the stochastic model may be approached from a more detailed perspective, considering specific effects affecting each observable individually, as for example the effects of ionospheric scintillation. These effects relate to phase and amplitude fluctuations in the satellites signals that occur due to diffraction on electron density irregularities in the ionosphere and are particularly relevant at equatorial and high latitude regions, especially during periods of high solar activity. As a consequence, degraded measurement quality and poorer positioning accuracy may result.     

伪卫星辅助的北斗定位系统的GDOP研究

我国建成的北斗导航定位系统由于卫星数目有限，不能实现实时三维无源定位．若利用地面伪卫星辅助，则能够很好地弥补这一缺陷，在地面伪卫星的作用范围内实现高精度的无源定位．卫星定位系统的精度等性能，很大程度上取决于定位卫星的数目和几何布局，而GDOP正是衡量定位卫星几何布局优劣的一个量度．本文从GDOP的角度研究了不同伪卫星位置及布局对系统定位精度的影响，得到的结论为合理设置伪卫星以进一步提高系统性能提供了有力的参考依据．     

航天器应急姿态捕获中GPS信号的应用

星载全球定位系统（GPS）卫星接收机在测量接收各GPS卫星信号时,可同时得到接收信号的信号强度测量辅助数据E。理论分析表明,接收信号的强度E与信号入射天线的法向夹角α强相关。如建立E与α稳定的先验模型,E就可以作为测量值,计算入射天线的角度α。在同一时刻,通过三个以上GPS卫星信号入射天线的角度α,可计算星载GPS卫星接收机接收天线的空间姿态。确定姿态的精度取决于E与α相关先验模型的稳定性。利用CHAMP卫星星载接收机在轨实测数据检验,估算的初始姿态精度为2°~3°。该方法可作为航天器故障状态下应急姿态捕获的一种辅助手段,也可为携带星载GPS而无高精度定姿要求的简易航天器提供一种新的无附加成本的定姿途径。     

Particle filter-based real-time phase line bias estimation for GNSS-based attitude determination with common-clock receivers

Global navigation satellite system (GNSS)-based attitude determination has been widely adopted in a wide variety of terrestrial, sea, air, and space applications. Recently, the emergence of commercial multi-GNSS common-clock receivers has brought new opportunities for high-precision GNSS-based attitude determination with single-differenced (SD) model. However, the key requirement of using this approach is the accurate estimation of the troublesome line bias (LB) in real-time. In this contribution, we propose a particle filter-based real-time phase LB estimation approach that apply to SD model with single-system single-frequency observations from common-clock receiver. We first analyzed the relationship between the integer ambiguity ratio value and the phase LB. It is proved that the accuracy of a given phase LB value can be qualified by the related ambiguity resolution ratio value, and the normalized ratio value can therefore be used to represent the likelihood function of observations. Then, we presented the particle filter-based real-time phase LB estimation procedure, and assessed its performance using GPS L1/BDS B1I observations from two datasets collected with different types of common-clock receivers in terms of the accuracy and convergence time of phase LB estimation, the computation load, and the positioning and attitude determination accuracy with respect to the double-differenced (DD) model. Experimental results demonstrated that the phase LB could be accurately estimated with short convergence time (generally within 15 epochs). Moreover, compared with the classical DD approach, the particle filter-based SD approach delivers comparable positioning root-mean-square (RMS) errors in the North and East components but significantly smaller RMS errors in the Up component. Accordingly, the achievable yaw accuracy is comparable whereas the pitch accuracy is remarkably improved. The improvements of positioning accuracy in the Up component and pitch accuracy are approximately 35.7 % to 63.7 %, and 33.3 % to 63.1 %, respectively. Additionally, the single-epoch computation time with our particle filter-based SD approach is generally 0.08 s, which is obviously larger than the DD approach but could still meet the requirements of real-time applications below 10 Hz sampling.     

Demonstration of a high sensitivity GNSS software receiver for indoor positioning

Advances in signal processing techniques contributed to the significant improvements of GNSS receiver performance in dense multipath environments and created the opportunities for a new category of high-sensitivity GNSS (HS-GNSS) receivers that can provide GNSS location services in indoor environments. The difficulties in improving the availability, reliability, and accuracy of these indoor capable GNSS receivers exceed those of the receivers designed for the most hostile urban canyon environments. The authors of this paper identified the vector tracking schemes, signal propagation statistics, and parallel processing techniques that are critical to a robust HS-GNSS receiver for indoor environments and successfully incorporated them into a fully functional high-sensitivity software receiver. A flexible vector-based receiver architecture is introduced to combine these key indoor signal processing technologies into GSNRx-hs™ – the high sensitivity software navigation receiver developed at the University of Calgary. The resulting receiver can perform multi-mode vector tracking in indoor environment at various levels of location and timing uncertainties. In addition to the obvious improvements in time-to-first-fix (TTFF) and signal sensitivity, the field test results in indoor environments surrounded by wood, glass, and concrete showed that the new techniques effectively improved the performance of indoor GNSS positioning. With fine GNSS timing, the proposed receiver can consistently deliver indoor navigation solution with the horizontal accuracy of 2–15 m depending on the satellite geometry and the indoor environments. If only the coarse GNSS timing is available, the horizontal accuracy of the indoor navigation solution from the proposed receiver is around 30 m depending on the coarse timing accuracy, the satellite geometry, and the indoor environments. From the preliminary field test results, it has been observed that the signal processing sensitivity is the dominant factor on the availability of the indoor navigation solution, while the GNSS timing accuracy is the dominant factor on the accuracy of the indoor navigation solution.     

Towards PPP-RTK: Ambiguity resolution in real-time precise point positioning

Integer ambiguity resolution at a single station can be achieved by introducing predetermined uncalibrated phase delays (UPDs) into the float ambiguity estimates of precise point positioning (PPP). This integer resolution technique has the potential of leading to a PPP-RTK (real-time kinematic) model where PPP provides rapid convergence to a reliable centimeter-level positioning accuracy based on an RTK reference network. Nonetheless, implementing this model is technically subject to how rapidly we can fix wide-lane ambiguities, stabilize narrow-lane UPD estimates, and achieve the first ambiguity-fixed solution. To investigate these issues, we used 7 days of 1-Hz sampling GPS data at 91 stations across Europe. We find that at least 10 min of observations are required for most receiver types to reliably fix about 90% of wide-lane ambiguities corresponding to high elevations, and over 20 min to fix about 90% of those corresponding to low elevations. Moreover, several tens of minutes are usually required for a regional network before a narrow-lane UPD estimate stabilizes to an accuracy of far better than 0.1 cycles. Finally, for hourly data, ambiguity resolution can significantly improve the accuracy of epoch-wise position estimates from 13.7, 7.1 and 11.4 cm to 0.8, 0.9 and 2.5 cm for the East, North and Up components, respectively, but a few tens of minutes is required to achieve the first ambiguity-fixed solution. Therefore, from the timeliness aspect, our PPP-RTK model currently cannot satisfy the critical requirement of instantaneous precise positioning where ambiguity-fixed solutions have to be achieved within at most a few seconds. However, this model can still be potentially applied to some near-real-time remote sensing applications, such as the GPS meteorology.