Carrier phase prediction method for GNSS precise positioning in challenging environment

Since the signals of global navigation satellite system (GNSS) are blocked frequently in challenging environments, the discontinuous carrier phases seriously affect the application of GNSS precise positioning. To improve the carrier phase continuity, this paper proposes a carrier phase prediction method based on carrier open-loop tracking. In the open-loop tracking mode, the carrier numerically controlled oscillator (NCO) is controlled by the predicted Doppler, but not by the loop filter output. To improve the phase prediction effective time, accurate receiver clock drift estimation is studied in the prediction method. The phase prediction performance is tested on GNSS software receiver. In the phase prediction effective time tests, open-loop processes were set for the tested channel. The test results show that, when some satellite signals are blocked in 15?s, the probability of carrier phase error less than quarter cycles is more than 94%. In the real time kinematic (RTK) positioning tests, some satellite signals are blocked in 10–15?s repeatedly. The test results show that, the carrier phase continuity is basically not affected by the signal interruption, and the RTK can almost keep continuous centimeter-level positioning accuracy without re-fixing the integer ambiguity.     

莱格赛500:重新定义“中型公务机”

正巴航工业莱格赛500是全球首款采用全电传操纵系统和侧杆操纵技术的中型喷气公务机,大幅减轻飞行员工作负荷的同时极大程度提升了飞行的安全与效率。作为一款融合了多项尖端技术和前卫设计的划时代产品,莱格赛500革命性地重新定义了中型公务机的概念,开启了一个新的纪元。     

FAST FEATURE RANKING AND ITS APPLICATION TO FACE RECOGNITION

A fast feature ranking algorithm for classification in the presence of high dimensionahty and small sample size is proposed. The basic idea is that the important features force the data points of the same class to maintain their intrinsic neighbor relations, whereas neighboring points of different classes are no longer to stick to one an- other. Applying this assumption, an optimization problem weighting each feature is derived. The algorithm does not involve the dense matrix eigen-decomposition which can be computationally expensive in time. Extensive exper- iments are conducted to validate the significance of selected features using the Yale, Extended YaleB and PIE data- sets. The thorough evaluation shows that, using one-nearest neighbor classifier, the recognition rates using 100-- 500 leading features selected by the algorithm distinctively outperform those with features selected by the baseline feature selection algorithms, while using support vector machine features selected by the algorithm show less prominent improvement. Moreover, the experiments demonstrate that the proposed algorithm is particularly effi- cient for multi-class face recognition problem.     

体育场挑蓬风荷载模拟实验研究

能容纳五万多观众的浙江省黄龙体育中心主体育场，在观众席上建有能遮挡风雨的挑蓬，挑蓬之大达座席覆盖率９０％以上，总面积２１０００ｍ２。挑蓬被支撑在外环梁和由斜拉索吊拉的内环梁上。大跨度梁结构受力问题，是建筑结构业一个十分复杂的问题，而杭州地区的地理位置处于我国的台风区，更显出风荷载影响的严重性。因此需对体育场置于大气边界层风洞中进行风荷载模拟实验，以取得合理的挑蓬体型系数，为结构设计的合理性和可靠性提供重要依据。最终可以节省建筑物的造价。     

LJ-2型离心机改造

为解决LJ-2离心机电气拖动系统老化、故障率高的问题,对系统进行了改造:电气拖动系统由PLC和DCS800数字直流调速器构成,工控机或HMI作为上位监控,更新了机械辅助传动系统,实现了离心机转臂上仪器与地面计算机光纤通讯,并增加了地面油站向转臂上设备提供液压油的能力。运行结果表明,改造后的拖动系统性能更佳,可靠性更高。     

多学科仿真在复杂设备系统设计中的应用

通过对复杂设备多学科特性的物理建模和系统集成,实现了对复杂设备整体性能的定量仿真,解决了复杂设备整体功能难以预测的设计难题。文章对多学科仿真及其常见方法作了简要介绍,并以其在几种复杂设备设计中的应用为例,展现了多学科仿真的工程应用价值。     

INS/SAR组合导航参数传递建模及精度分析

 对合成孔径雷达景象匹配辅助（INS/SAR）组合导航中地面合成孔径雷达(SAR)匹配点位置参数向飞行器主惯导中心的传递过程进行研究。分析了SAR匹配点位置传递过程中所涉及的各环节及其相互关系,以此为基础建立了测量参数传递过程数学模型,提出适合该模型的误差分析与精度估计方法,结合理论和实验结果对各测量参数误差所造成的传递误差进行分析和比较,得出单一测量参数误差影响程度的排序,并在此基础上得出总精度的估计值。参数传递模型及精度实验结果与实际情况相符,可为组合导航中合理的精度分配提供依据。     

分裂导线平均风荷载阻力系数干扰效应研究

分裂导线在不同风场条件下的阻力系数及干扰效应对导线风荷载的合理化设计十分重要。不同迎风角和雷诺数下分裂导线气动阻力系数特性及干扰屏蔽效应比较复杂。为了研究该干扰效应,设计长细比约为1∶30、长度约为1m 的导线节段模型试验,获得导线平均风荷载阻力系数随雷诺数、尾流干扰的变化规律;进行了不同风速和迎风方向下4、6和8分裂导线节段模型平均风荷载阻力系数试验,总结了多分裂导线阻力系数的屏蔽效应规律特性。试验结果表明,多分裂导线气动阻力系数干扰效应明显,且不同迎风方式对风荷载影响较大,风荷载明显低于现行规范规定值。分裂导线风荷载合理化设计和计算应该重视迎风角度和干扰效应的影响。     

基于合成卷积层网络结构的焊缝X射线图片缺陷筛选技术

焊接技术应用于多个领域,近些年焊缝缺陷自动检测技术成为了重要的研究方向。本文基于VGG-16卷积神经网络的良好分类性能,提出一种SC-VGG网络结构,利用合成卷积层替换了单个卷积层,同时改进了训练过程中的损失函数,使网络结构更为关注焊缝缺陷类型预测的结果。经过实验测试,SC-VGG网络结构在训练过程中损失函数曲线可以很好的收敛,与其他网络结构相比对焊缝缺陷特征的提取性能更好,平均准确率和召回率达到了95.86%和98.33%,为焊缝缺陷自动化识别提供了算法支撑。     

一种非接触式微小飞片速度原位测量技术

文章提出了一种新的微小飞片平均速度原位测量技术,并研制了速度测量装置。在飞片的飞行路径上设置片激光,通过测量飞片经过片激光的时间间隔及对应的飞行距离,便可获得飞片的平均速度。测量装置的主要部件是高频激光器和高灵敏度光电接收器,无其他复杂或者大型设备,易于与激光驱动微小飞片发射装置等配套衔接,操作方便,成本低。大量试验数据表明,测量装置工作稳定可靠,对厚度不小于3μm、速度不大于10 km/s的飞片,速度测量精度优于5%。