共查询到20条相似文献,搜索用时 989 毫秒
1.
提出了一种基于串级线性自抗扰控制器的四旋翼无人机控制方法。根据建立的紊流模型形成了干扰风,在干扰风的环境下建立了四旋翼的运动学模型,并设计了一个串级的线性自抗扰控制器,其中外环采用位置控制,内环采用姿态控制。对比了该控制器与非线性自抗扰控制器和经典PID控制器在无风干扰和有风干扰下无人机的定点悬停的性能。仿真试验结果表明,无论是在无风干扰下还是在有风干扰下,该控制器的性能均好于非线性自抗扰控制器和PID控制器,具有较好的鲁棒性,能够运用到各种类型的旋翼无人机的工程控制中。 相似文献
2.
《中国航空学报》2016,(3):789-798
This paper presents an integrated fuzzy controller design approach to synchronize a dis-similar redundant actuation system of a hydraulic actuator (HA) and an electro-hydrostatic actu-ator (EHA) with system uncertainties and disturbances. The motion synchronous control system consists of a trajectory generator, an individual position controller for each actuator, and a fuzzy force tracking controller (FFTC) for both actuators. The trajectory generator provides the desired motion dynamics and designing parameters of the trajectory which are taken according to the dynamic characteristics of the EHA. The position controller consists of a feed-forward controller and a fuzzy position tracking controller (FPTC) and acts as a decoupled controller, improving posi-tion tracking performance with the help of the feed-forward controller and the FPTC. The FFTC acts as a coupled controller and takes into account the inherent coupling effect. The simulation results show that the proposed controller not only eliminates initial force fighting by synchronizing the two actuators, but also improves disturbance rejection performance. 相似文献
3.
基于LADRC的无人直升机轨迹跟踪 总被引:4,自引:1,他引:3
无人直升机轨迹控制系统是对多输入/多输出强耦合非线性系统进行解耦控制的系统。为解决无人直升机轨迹控制效果依赖于直升机物理参数的测量和辨识精度以及外部扰动大小问题,提出了一种基于线性自抗扰控制(LADRC)的多回路无人直升机轨迹控制系统。首先建立无人直升机X-Cell的飞行动力学模型,并引入风切变、大气紊流和突风模型以更加准确模拟真实飞行环境;然后对X-Cell进行配平计算以验证动力学模型和配平算法的准确性,并选取一组配平值作为轨迹控制仿真的初始状态和操纵量;随后根据被控量的动力学方程阶次选取对应的一阶和二阶LADRC基本控制器,并结合时间尺度原理,自内向外依次构建无人直升机的姿态、速度和位置控制回路,将三回路串联从而建立了无人直升机轨迹控制系统;而后进行了稳定性分析,特征根计算结果表明轨迹控制系统镇定了X-Cell开环系统不稳定的动态特性;最后将该控制系统应用于各种扰动下直升机轨迹跟踪仿真,结果表明本文无人直升机轨迹控制系统能很好地实现带爬升率的"8"字形轨迹跟踪,且相比于基于比例积分和微分(PID)控制的轨迹控制系统,该控制系统具有更优的鲁棒性和抗扰性。 相似文献
4.
5.
A new hybrid control scheme is presented with a robust multiple model fusion control(RMMFC) law for a UH-60 helicopter and an active disturbance rejection control(ADRC) controller for its engines.This scheme is a control design method with every subsystem designed separately but fully considering the couplings between them.With three subspaces with respect to forward flight velocity,a RMMFC is proposed to devise a four-loop reference signal tracing control for the helicopter,which escapes the closed-loop system from unstable state due to the extreme complexity of this integrated nonlinear system.The engines are controlled by the proposed ADRC decoupling controller,which fully takes advantage of a good compensation ability for unmodeled dynamics and extra disturbances,so as to compensate torque disturbance in power turbine speed loop.By simulating a forward acceleration flight task,the RMMFC for the helicopter is validated.It is apparent that the integrated helicopter and engine system(IHES) has much better dynamic performance under the new control scheme.Especially in the switching process,the large transient is significantly weakened,and smooth transition among candidate controllers is achieved.Over the entire simulation task,the droop of power turbine speed with the proposed ADRC controller is significantly slighter than with the conventional PID controller,and the response time of the former is much faster than the latter.By simulating a rapid climb and descent flight task,the results also show the feasibility for the application of the proposed multiple model fusion control.Although there is aggressive power demand in this maneuver,the droop of power turbine speed with an ADRC controller is smaller than using a PID controller.The control performance for helicopter and engine is enhanced by adopting this hybrid control scheme,and simulation results in other envelope state give proofs of robustness for this new scheme. 相似文献
6.
The problem of controlling a spacecraft by measuring only the angular position (roll, pitch, and yaw) is considered. A nonlinear observer is proposed which asymptotically reconstructs all the spacecraft state variables; if the spacecraft actuators are reaction wheels, the angular velocities of the wheels also must be measured. It is shown that if the observer is used in connection with asymptotically stable state feedback controllers, the extended system (spacecraft, controller, and observer) is still asymptotically stable. Simulation results are reported to illustrate the dynamic behavior of the observer 相似文献
7.
WAEL Mohsen Ahmeda 《中国航空学报》2011,24(6):777-788
This paper investigates the boost phase’s longitudinal autopilot of a ballistic missile equipped with thrust vector control. The existing longitudinal autopilot employs time-invariant passive resistor-inductor-capacitor (RLC) network compensator as a control strategy, which does not take into account the time-varying missile dynamics. This may cause the closed-loop system instability in the presence of large disturbance and dynamics uncertainty. Therefore, the existing controller should be redesigned to achieve more stable vehicle response. In this paper, based on gain-scheduling adaptive control strategy, two different types of optimal controllers are proposed. The first controller is gain-scheduled optimal tuning-proportional-integral-derivative (PID) with actuator constraints, which supplies better response but requires a priori knowledge of the system dynamics. Moreover, the controller has oscillatory response in the presence of dynamic uncertainty. Taking this into account, gain-scheduled optimal linear quadratic (LQ) in conjunction with optimal tuning-compensator offers the greatest scope for controller improvement in the presence of dynamic uncertainty and large disturbance. The latter controller is tested through various scenarios for the validated nonlinear dynamic flight model of the real ballistic missile system with autopilot exposed to external disturbances. 相似文献
8.
Directing to the strong position coupling problem of electro-hydraulic load simulator (EHLS), this article presents an adap-tive nonlinear optimal compensation control strategy based on two estimated nonlinear parameters, viz. the flow gain coeffi-cient of servo valve and total factors of flow-pressure coefficient. Taking trace error of torque control system to zero as control object, this article designs the adaptive nonlinear optimal compensation control strategy, which regards torque control output of closed-loop controller converging to zero as the control target, to optimize torque tracking performance. Electro-hydraulic load simulator is a typical case of the torque system which is strongly coupled with a hydraulic positioning system. This article firstly builds and analyzes the mathematical models of hydraulic torque and positioning system, then designs an adaptive nonlinear optimal compensation controller, proves the validity of parameters estimation, and shows the comparison data among three control structures with various typical operating conditions, including proportion-integral-derivative (PID) controller only, the velocity synchronizing controller plus PID controller and the proposed adaptive nonlinear optimal compensation controller plus PID controller. Experimental results show that systems’ nonlinear parameters are estimated exactly using the proposed method, and the trace accuracy of the torque system is greatly enhanced by adaptive nonlinear optimal compensation control, and the torque servo system capability against sudden disturbance can be greatly improved. 相似文献
9.
This article deals with the disturbance attenuation control of aircraft flying through wind shear via Linear Parameter Varying(LPV) modeling and control method. A Flight Dynamics Model(FDM) with wind shear effects considered was established in wind coordinate system. An LPV FDM was built up based on function substitution whose decomposing function was optimized by Genetic Algorithm(GA). The wind disturbance was explicitly included in the system matrix of LPV FDM. Taking wind disturbance as external uncertainties, robust LPV control method with the LPV FDM was put forward. Based on ride quality and flight safety requirements in wind disturbance, longitudinal and lateral output feedback robust LPV controllers were designed respectively,in which the scheduling flight states in LPV model were actually dependent parameters in LPV control. The results indicate that LPV FDM can reflect the instantaneous dynamics of nonlinear system especially at the boundary of aerodynamic envelope. Furthermore, the LPV FDM also can approach nonlinear FDM's response in wind disturbance special flight. Compared with a parameter-invariant LQR controller designed with a small-disturbance FDM, the LPV controllers show preferable robustness and stability for disturbance attenuation. 相似文献
10.
11.
A fuzzy robust nonlinear controller for hydraulic rotary actuators in flight motion simulators is proposed. Compared with other three-order models of hydraulic rotary actuators, the proposed controller based on first-order nonlinear model is more easily applied in practice, whose control law is relatively simple. It not only does not need high-order derivative of desired command,but also does not require the feedback signals of velocity, acceleration and jerk of hydraulic rotary actuators. Another advantage is that it does not rely on any information of friction, inertia force and external disturbing force/torque, which are always difficult to resolve in flight motion simulators. Due to the special composite vane seals of rectangular cross-section and goalpost shape used in hydraulic rotary actuators, the leakage model is more complicated than that of traditional linear hydraulic cylinders. Adaptive multi-input single-output(MISO) fuzzy compensators are introduced to estimate nonlinear uncertain functions about leakage and bulk modulus. Meanwhile, the decomposition of the uncertainties is used to reduce the total number of fuzzy rules. Different from other adaptive fuzzy compensators, a discontinuous projection mapping is employed to guarantee the estimation process to be bounded. Furthermore, with a sufficient number of fuzzy rules, the controller theoretically can guarantee asymptotic tracking performance in the presence of the above uncertainties, which is very important for high-accuracy tracking control of flight motion simulators.Comparative experimental results demonstrate the effectiveness of the proposed algorithm, which can guarantee transient performance and better final accurate tracking in the presence of uncertain nonlinearities and parametric uncertainties. 相似文献
12.
13.
14.
《中国航空学报》2021,34(3):25-38
The attenuation of spatially evolving instability Tollmien-Schlichting (T-S) waves in the boundary layer of a flat plate with zero pressure gradients using an active feedback control scheme is theoretically and numerically investigated. The boundary layer is excited artificially by various perturbations to create a three-dimensional field of instability waves. Arrays of actuators and sensors are distributed locally at the wall surface and connected together via a feedback controller. The key elements of this feedback control are the determination of the dynamic model of the flat plate boundary layer between the actuators and the sensors, and the design of the model-based feedback controller. The dynamic model is established based on the linear stability calculation which simulates the three-dimensional input-output behaviour of the boundary layer. To simplify the control problem, an uncoupled control mode of the dynamic model is made to capture only those dynamics that have greatest influences on the input-output behaviour. A Proportional-Integral-Derivative (PID) controller, i.e. a lead-lag compensator, combining with a standard Smith predictor is designed based on the system stability criterion and the specifications using frequency-response methods. Good performance of the feedback control with the uncoupled control mode is demonstrated by the large reduction of the three-dimensional disturbances in the boundary layer. This simple feedback control is realistic and competitive in a practical implementation of T-S wave cancellation using a limited number of localised sensors and actuators. 相似文献
15.
Lin C.L. Shieh N.C. Tung P.C. 《IEEE transactions on aerospace and electronic systems》2002,38(3):918-932
Design, simulation and experimental implementation of a wavelet basis function network learning controller for linear brushless dc motors (LBDCM) are considered. Stability robustness with position tracking is the primary concern. The proposed controller deals mainly with external disturbances, e.g. nonlinear friction force and payload variation in motion control of linear motors. It consists of two parts, one is a state feedback component, and the other one is a learning feedback component. The state feedback controller is designed on the basis of a simple linear model, and the learning feedback component is a wavelet neural controller. The attenuation effect of wavelet neural networks on friction force is first verified by the numerical method. The learning effect of wavelet neural networks on friction force is also shown in the numerical results. Then, a wavelet neural network is applied on a real LBDCM to on-line suppress the friction force, which may be variable due to the different lubrication. The effectiveness of the proposed control schemes is demonstrated by simulated and experimental results. 相似文献
16.
Wang L. Dawson J.M. Hornak L.A. Famouri P. Ghaffarian R. 《IEEE transactions on aerospace and electronic systems》2004,40(2):567-575
Closed-loop control has been successfully applied to a microelectromechanical systems (MEMS) lateral comb resonator device in real-time to perform impulse disturbance damping and sinusoidal position control, enabled by the use of a through-wafer optical microprobe to obtain position feedback. This result leverages the application of lifetime, in-situ control of MEMS in order to provide quality assurance of microsystems in safety critical applications. A position feedback signal produced by a through-wafer optical microprobe has been used for comb resonator system model identification by two independent methods to accurately determine the effective mass, damping, and spring constant values of the device. After accurate determination of system parameters, closed-loop impulse disturbance damping and proportional-integral-differential (PID) translational control were applied. Closed-loop control results presented indicate controllability of such microstructures and response times on the order of the natural frequency of the device. 相似文献
17.
为了抑制轨迹跟踪过程中各自由度运动之间的相互干扰,将平台跟踪的轨迹进行泰勒级数展开,提出基于工作空间含有各向自由度运动自身跟踪偏差和各自由度运动之间耦合干扰偏差的综合轨迹跟踪偏差量的表达式。根据工作空间综合偏差量反馈,利用反步法设计鲁棒控制器,使各向自由度运动自身跟踪偏差与之间的耦合偏差同时稳定地趋于零,以限制跟踪过程中各自由度运动之间耦合干扰。同时,考虑到实际平台惯性参数不确定性,推导得出惯性参数自适应律,以提高系统的跟踪精度。利用AMESim与MATLAB进行联合仿真验证,结果表明:与传统的比例 积分 微分(PID)控制器相比,该方法在保证各自由度运动自身跟踪偏差稳定收敛的同时有效地降低了各自由度运动之间的耦合干扰偏差,更有效地提高了平台的跟踪性能。 相似文献
18.
19.
《中国航空学报》2016,(3):722-737
Agile satellites are of importance in modern aerospace applications,but high mobility of the satellites may cause them vulnerable to saturation during attitude maneuvers due to limited rating of actuators.This paper proposes a near minimum-time feedback control law for the agile satellite attitude control system.The feedback controller is formed by specially designed cascaded sub-units.The rapid dynamic response of the modified Bang–Bang control logic achieves the near optimal property and ensures the non-saturation properties on three-axis.To improve the dynamic performance,a model reference control strategy is proposed,in which the on-line near optimal attitude maneuver path is generated by the cascade controller and is then tracked by a nonlinear back-stepping controller.Furthermore,the accuracy and the robustness of the control system are achieved by momentum-based on-line inertial identification.The rapid attitude maneuvering can be applied for tasks including the move to move case.Numerical simulations are conducted to verify the effectiveness of the proposed control strategy in terms of the saturation-free property and rapidness. 相似文献
20.
《中国航空学报》2020,33(6):1774-1787
The main objective of the turboprop engine control system is to ensure propeller absorbed power at a constant propeller speed by controlling fuel flow and blade angle. Since each input variable affects the selected output variables, there exist strong interactions between different control loops of a Two-Spool TurboProp Engine (TSTPE). Inverted decoupling is used to decouple the interactions and decompose the TSTPE into two independent single-input single-output systems. The multi-variable PI controller and two single-variable PI controllers are designed for the TSTPE with actuator dynamics based on Linear Matrix Inequality (LMI), respectively, which is derived from static output feedback and pole placement condition. The step responses show that due to the difference in the response times of the selected output variables, it is difficult to design an appropriate multi-variable PI controller. The designed single-variable PI controllers are tested on the TSTPE integrated model to illustrate the effectiveness of the proposed method, that is, the interactions are first decoupled and then the controllers are designed, and the resulting simulated responses show that compared with the controller designed without actuator dynamics, the gas-generator shaft speed and power turbine shaft speed can better track their respective commands under the action of the controller designed with actuator dynamics. 相似文献