Robust adaptive fault-tolerant control of a tandem coaxial ducted fan aircraft with actuator saturation

This paper is concerned with the robust adaptive fault-tolerant control of a tandem coaxial ducted fan aircraft under system uncertainty, mismatched disturbance, and actuator saturation. For the proposed aircraft, comprehensive controllability analysis is performed to evaluate the controllability of each state as well as the margin to reject mismatched disturbance without any knowledge of the controller. Mismatched disturbance attenuation is ensured through a structured H-infinity controller tuned by a non-smooth optimization algorithm. Embedded with the H-infinity controller, an adaptive control law is proposed in order to mitigate matched system uncertainty and actuator fault. Input saturation is also considered by the modified reference model. Numerical simulation of the novel ducted fan aircraft is provided to illustrate the effectiveness of the proposed method. The simulation results reveal that the proposed adaptive controller achieves better transient response and more robust performance than classic Model Reference Adaptive Control (MRAC) method, even with serious actuator saturation.     

RFNN control for PMLSM drive via backstepping technique

A robust fuzzy neural network (RFNN) control system is proposed in this study to control the position of the mover of a permanent magnet linear synchronous motor (PMLSM) drive system to track periodic reference trajectories. First, an ideal feedback linearization control law is designed based on the backstepping technique. Then, a fuzzy neural network (FNN) controller is designed to be the main tracking controller of the proposed RFNN control system to mimic an ideal feedback linearization control law, and a robust controller is proposed to confront the shortcoming of the FNN controller. Moreover, to relax the requirement for the bound of uncertainty term, which comprises a minimum approximation error, optimal parameter vectors and higher order terms in Taylor series, an adaptive bound estimation is investigated where a simple adaptive algorithm is utilized to estimate the bound of uncertainty. Furthermore, the simulated and experimental results due to periodic reference trajectories demonstrate that the dynamic behaviors of the proposed control systems are robust with regard to uncertainties.     

直连式三体绳系卫星姿态鲁棒最优跟踪控制

 针对存在参数不确定性以及外部有界干扰的直连式三体旋转绳系卫星系统姿态跟踪控制问题,提出了一种分布式鲁棒最优控制方法。该方法首先针对单体绳系卫星姿态模型,在不考虑参数不确定性和干扰的条件下,应用Hamilton-Jacobi-Bellman方程设计了最优控制器;接着,考虑到实际系统存在参数不确定性和干扰,采用自适应与鲁棒误差积分方法在线学习参数不确定性和有界干扰,与最优控制器结合设计了鲁棒最优控制器,使闭环系统满足了性能指标达到最小的要求,并应用Lyapunov稳定性定理证明了其闭环系统的渐近稳定性。进一步考虑到绳系卫星系统的运动同步性,将单体绳系卫星姿态控制器设计扩展至直连式三体绳系卫星姿态系统,设计了分布式鲁棒最优控制器。最后在MATLAB/Simulink平台上进行了仿真,验证了方法的可行性与有效性,表明其具有潜在的应用前景。     

不确定航空发动机分布式控制系统自适应滑模控制

针对存在参数摄动、外部干扰的航空发动机不确定性分布式控制系统，在系统具有时变输入时延和干扰上界未知的情况下，设计了具有鲁棒性能的自适应滑模控制器。基于预测控制和矩阵奇异值理论，对初始的发动机离散分布式模型进行等效线性变换，得到不显含时延项的规范形系统模型，便于进行滑模面参数的求解；在给定的H∞指标下，推导了滑模运动在非匹配不确定性作用下渐进稳定的充分条件，给出了线性矩阵不等式(LMI)形式的滑模面参数设计方法；最后，设计对干扰具有估计功能的自适应率，在此基础上提出自适应滑模控制器。仿真结果表明:所设计的控制器能够有效降低外部干扰对系统动态性能的影响，在所考虑的不确定性因素作用下，系统的滑模运动具有理想的H∞性能。当外部干扰强度变化时，控制器的鲁棒性较好，状态收敛时间小于0.8s，且不存在抖振。      

相对失控翻滚目标悬停的自适应模糊滑模控制

研究了含有系统不确定性和外部干扰的追踪器相对失控翻滚目标悬停的六自由度耦合控制问题。首先，在追踪器本体坐标系中建立了非线性的六自由度耦合的一体化动力学模型，将悬停控制问题转化为相对位置和相对姿态控制问题。再基于模糊逼近原理设计了一种自适应的模糊滑模控制器，该控制器能够有效克服系统的模型不确定性和外部干扰的影响，并能消除传统的抖振问题。由Lyapunov方法导出了模糊自适应律并证明了闭环系统的稳定性。数值仿真验证了所提的自适应模糊滑模控制器的有效性。     

Adaptive control for feedback-linearized missiles withuncertainties

A robust adaptive control scheme is proposed that can be applied to a practical autopilot design for feedback-linearized skid-to-turn (STT) missiles with aerodynamic uncertainties. The approach is to add a robust adaptive controller to a feedback-linearizing controller in order to reduce the influence of the aerodynamic uncertainties. The proposed robust adaptive control scheme is based on a sliding mode control technique with an adaptive law for estimating the unknown upper bounds of uncertain parameters. A feature of the proposed scheme is that missile systems with aerodynamic uncertainties can be controlled effectively over a wide operating range of flight conditions. It is shown, using Lyapunov stability theory, that the proposed scheme can give sufficient tracking capability and stability for a feedback-linearized STT missile with aerodynamic uncertainties. The six-degree-of-freedom nonlinear simulation results also show that good performance for several uncertainty models and engagement scenarios can be achieved by the proposed scheme in practical night conditions     

挠性航天器的退步直接自适应姿态跟踪控制

针对参数不确定的挠性航天器姿态跟踪控制问题,提出了一种退步直接自适应控制算法。首先验证了挠性航天器动力学子系统的近似严格正实性,并设计了具有理想控制性能的参考模型;然后对以姿态四元数描述的运动学子系统设计常系数输出反馈中间控制律,使航天器姿态四元数输出渐近跟踪参考模型输出;最后退一步,对具有参数不确定特性的动力学子系统,基于非线性直接自适应控制理论和Lyapunov稳定性理论,设计了退步直接自适应姿态跟踪控制器,并证明了闭环系统的稳定性。仿真结果表明,所提控制方法能有效抑制挠性附件的振动,对挠性航天器的控制是有效的。     

非线性不确定系统的鲁棒自适应控制方法研究及稳定性分析

针对一类存在外界干扰和未建模动态的非线性不定系统,特别是含线性定常的参数不确定性及状态关联的非线性不确定性系统,应用直接自适应控制方法,设计了基于李雅普诺夫稳定性理论的鲁棒自适应控制律和修正律;应用李雅普诺夫稳定判据,对系统的稳定性进行了分析,证明所设计的控制律和修正律具有较强的鲁棒稳定性。     

铣削过程在线辨识与极点配置自适应控制

 研究了铣削加工过程的建模、参数在线辨识及自适应控制问题,为铣削过程建立了二阶离散传递函数模型,提出了一种修正的带遗忘因子递推最小二乘参数辨识算法,从而解决了普通递推最小二乘辨识算法中由于递推计算协方差矩阵衰退或膨胀引起辨识结果失真的问题,采用极点配置设计原理,为铣削过程推导了自适应控制的控制律。仿真和实验表明,修正的最小二乘辨识算法和极点配置自适应控制律是正确和可靠的,自适应控制器可获得所需的响应性能。     

Adaptive fuzzy terminal sliding mode control for the free-floating space manipulator with free-swinging joint failure

Space manipulator with free-swinging joint failure simultaneously contains kinematic and dynamic coupling relationships, so it belongs to a new underactuated system. To allow the manipulator to carry on tasks, an effective robust underactuated control method for the space manipulator with free-swinging joint failure is studied in this paper. Considering the effect of model uncertainty and joint torque disturbance, a robust underactuated control system based on the Terminal Sliding Mode Controller (TSMC) is designed, but two drawbacks are discussed: (A) Robustness depraves with eliminating chattering. (B) Control parameters are difficult to be determined under unknown uncertainty and disturbance. To improve the TSMC, the adaptive fuzzy controller is introduced to estimate the real effect of unknown uncertainty and disturbance according to deviations of sliding mode and its reaching law. The estimated result is directly compensated into active joints torque. In simulation, the space manipulator with free-swinging joint executes tasks based on the TSMC and the Adaptive Fuzzy Terminal Sliding Mode Controller (AFTSMC) respectively. Same tasks can be finished with smaller joints torque and stronger robustness based on the AFTSMC. Therefore, AFTSMC can serve as an effective robust control method for the space manipulator with free-swinging joint failure under unknown model uncertainty and torque disturbance.     

Fixed-time adaptive model reference sliding mode control for an air-to-ground missile

This paper addresses the fixed-time adaptive model reference sliding mode control for an air-to-ground missile associated with large speed ranges, mismatched disturbances and un-modeled dynamics. Firstly, a sliding mode surface is developed by the tracking error of the state equation and the model reference state equation with respect to the air-to-ground missile. More specifically,a novel fixed-time adaptive reaching law is presented. Subsequently, the mismatched disturbances and the un-modeled dynamics are treated as the model errors of the state equation. These model errors are estimated by means of a fixed-time disturbance observer, and they are also utilized to compensate the proposed controller. Therefore, the fixed-time controller is obtained by an adaptive reaching law and a fixed-time disturbance observer. Closed-loop stability of the proposed controller is established. Finally, simulation results including Monte Carlo simulations, nonlinear six-DegreeOf-Freedom(6-DOF) simulations and different ranges are presented to demonstrate the efficacy of the proposed control scheme.     

中远程空地导弹末制导自适应控制

讨论了中远程空导弹的自适应控制规律,基于古典控制器模型,设计了自适应自动驾驶仪：通过适当选择自适应参数,保证了系统良好的动态品质和干扰抑制特性;提出了一种基于李亚诺夫稳定性理论的飞行控制系统方案,推导了自适应控制规律,并对导弹多种飞行高度和初如条件进行了仿真计算,仿真结果表明,所设计的自适应控制系统性能明显优于古典控制回路,具有较好的应用价值。     

基于有向图的航天器编队飞行自适应姿态协同控制

在有向通信拓扑下研究了编队航天器自适应姿态协同控制问题。针对航天器编队飞行系统中存在外部扰动和模型不确定性的情况,通过选取包含相对姿态误差和绝对姿态误差的辅助变量,提出了一种鲁棒自适应控制策略。提出了自适应律估计转动惯量矩阵和扰动上界等未知参数,并且利用Lyapunov稳定性理论分析了闭环系统的渐近稳定性。与滑模控制等传统鲁棒控制不同,所设计的鲁棒自适应控制器是连续的,更便于航天器编队飞行系统的实现。最后通过仿真验证了该控制策略能够实现高精度的编队飞行跟踪控制。     

机械手的神经网络自适应滑动模控制器设计

 针对多关节机械手的鲁棒跟随控制器设计问题，提出了一种新的机械手神经网络自适应滑动模控制器设计方法，机械手的动力学非线性假设是完全未知的。在提出的控制结构中，高斯径向基函数神经网络用于在线补偿机械手的动力学非线性，参数学习律由稳定性理论得到。给出了系统稳定性和参数收敛性的证明。最后提出方法的可行性通过仿真得到验证。     

A novel intelligent adaptive control of laser-based ground thermal test

Laser heating technology is a type of potential and attractive space heat flux simulation technology, which is characterized by high heating rate, controlled spatial intensity distribution and rapid response. However, the controlled plant is nonlinear, time-varying and uncertainty when implementing the laser-based heat flux simulation. In this paper, a novel intelligent adaptive controller based on proportion–integration–differentiation(PID) type fuzzy logic is proposed to improve the performance of laser-based ground thermal test. The temperature range of thermal cycles is more than 200 K in many instances. In order to improve the adaptability of controller,output scaling factors are real time adjusted while the thermal test is underway. The initial values of scaling factors are optimized using a stochastic hybrid particle swarm optimization(H-PSO)algorithm. A validating system has been established in the laboratory. The performance of the proposed controller is evaluated through extensive experiments under different operating conditions(reference and load disturbance). The results show that the proposed adaptive controller performs remarkably better compared to the conventional PID(PID) controller and the conventional PID type fuzzy(F-PID) controller considering performance indicators of overshoot, settling time and steady state error for laser-based ground thermal test. It is a reliable tool for effective temperature control of laser-based ground thermal test.     

Autonomous attitude coordinated control for spacecraft formation with input constraint,model uncertainties,and external disturbances

To synchronize the attitude of a spacecraft formation flying system, three novel autonomous control schemes are proposed to deal with the issue in this paper. The first one is an ideal autonomous attitude coordinated controller, which is applied to address the case with certain models and no disturbance. The second one is a robust adaptive attitude coordinated controller, which aims to tackle the case with external disturbances and model uncertainties. The last one is a filtered robust adaptive attitude coordinated controller, which is used to overcome the case with input con- straint, model uncertainties, and external disturbances. The above three controllers do not need any external tracking signal and only require angular velocity and relative orientation between a spacecraft and its neighbors. Besides, the relative information is represented in the body frame of each spacecraft. The controllers are proved to be able to result in asymptotical stability almost everywhere. Numerical simulation results show that the proposed three approaches are effective for attitude coordination in a spacecraft formation flying system.     

有输入未建模动态和不确定性导弹控制器设计

在考虑导弹控制系统同时存在输入未建模动态和参数不确定性的情况下,提出了一种基于RBF神经网络和反演技术的鲁棒自适应控制器的设计方法。首先用两个RBF神经网络对未建模动态进行了补偿,然后利用反演技术设计了鲁棒自适应控制器,对不确定性进行了处理,并用Lyapunov稳定性理论推导出RBF神经网络的权重矩阵调节率以及相关的自适应律,证明了系统的全局稳定性,最后通过仿真计算验证了设计的正确性。     

航空发动机多变量鲁棒数字控制器的设计

提出了一种设计发动机多变量鲁棒数字控制器的方法,即在划分的飞行包线内,控制结构采用前馈加反馈的方法,对结构不确定性和非结构不确定性进行μ结构化处理,化为H∞控制问题求解,这一方法在发动机非线形气动热力模型上进行了仿真验证。      

广义预测自适应控制器在导弹控制系统设计中应用

将一种新的广义预测自适应控制算法应用于快速时变的导弹控制系统设计中。讨论了设计参数对控制系统性能的影响;针对自适应控制信号过大,提出了改进方案,增强了系统的鲁棒性和抗干扰能力。大量的数字仿真结果表明:运用该方案设计的导弹控制系统具有很好的跟踪性能和强的抗干扰能力;对系统阶次、参数、时延和采样周期的变化具有很强的鲁棒性;自适应算法中,对验前知识要求少,实现起来也比较简单。     

高精度液压仿真转台鲁棒控制

 针对液压仿真转台具有时变不确定性、复杂外干扰等特点和高精度控制性能要求，提出了一种鲁棒复合控制结构，该结构由鲁棒内回路补偿器、外回路反馈控制器和输入信号前馈补偿器三部分组成。其中，鲁棒内回路补偿器用来抑制外干扰和时变不确定性的影响，外回路反馈控制器的作用是保证闭环系统的整体性能，输入信号前馈补偿器实现对系统动态时滞的补偿，以保证对参考信号的精确跟踪。以某型液压仿真转台内环为例，首先根据所提出控制策略的基本思想，给出了控制系统的具体设计过程，然后，进行了阶跃响应、低速跟踪和正弦响应试验。试验结果表明，所提出的鲁棒控制策略是有效的和可行的。