共查询到19条相似文献,搜索用时 218 毫秒
1.
2.
IRIG-B(AC)码解调技术浅析 总被引:1,自引:0,他引:1
我国标准化时统采用国际上通用的IRIG—B格式时间码(以下简称B码)作为用户设备的接口信号,具有可靠性高、接口标准、使用灵活方便等优点,推广使用以来得到了使用单位的一致好评。为各靶场试验任务的完成发挥了很好的保障作用。由于对B码特性认识的局限,有些用户设备B码接口终端在解调B码信号时还存在一些问题,主要表现在:1)不能正确获取时间信息(通常表现为获得的时间比时统的时间慢一秒);2)解调精度不满足要求;3)不能准确解调出秒准时点(或称秒相位);4)B码输入通道自适应能力较差。下面就将解调B码时产生上述问题的机理及相应的克服措施进行分析和讨论。 相似文献
3.
4.
5.
为满足高度综合化发展对嵌入式处理系统交联信号的多样性要求,提出了一种基于PCI Express总线架构的多功能接口模块的设计实现方案。采用一片FPGA作为逻辑设计芯片,实现了包括FC、RS422、ARINC429、USB、IDE等多种接口,满足了综合化发展对模块功能、功耗和重量等要求,可通用于各类综合处理系统接口设计中。 相似文献
6.
7.
8.
栽机要求悬挂物必须实现GJB1188A中数据总线(GJB289A)的远程终端(RT)功能,同时实现GJB1188A中任务悬挂物投放允许等接口功能.描述了一种采用TMS320C6713B高速浮点DSP为核心的GJB1188A接口的实现方法,从硬件平台组成、控制逻辑实现、驱动软件结构三个方面来说明GJB289A(RT)功能的实现方法.介绍了任务悬挂物投放允许等接口的一种设计实现方法.从而将以往单一的GJB289A总线接口模块与嵌入式计算机结合在一起.满足了体积和成本上的要求.使嵌入式弹载计算机在GJB1188A接口的前提下实现与机载火控系统的通信、进行同步的数据采集与控制. 相似文献
9.
大型飞机襟缝翼角位移传感器的交流信号在经过长距离传输后产生电压幅值升高的现象,导致角度测量超差的问题。本文提出了采用正余弦传感器利用信号解调技术解决该问题的方法,论述了正余弦传感器和AD2S1210解调芯片的解调原理,设计了正余弦传感器的监控方法、AD2S1210的外围接口电路及FPGA的配置和时序控制方法。该设计方案已应用于某大型飞机的襟缝翼控制器计算机,良好的试验测试结果证明了该方法可以解决传感器交流信号长距离传输带来的测量超差问题。该研究可以应用于大型飞机的角度及线位移测量领域,对于提升大型飞机传感器的测量精度具有重要意义。同时,针对AD2S1210解调芯片供应链的不稳定性设计了国产化的旋转变压器传感器的激励电路原理,正弦、余弦输入信号的解调及监控方法原理作为备用方案。 相似文献
10.
本文讨论了我们设计的一种符合美国 MIL-STD-1553B 和我国 GJB289-87数据总线标准的总线接口芯片,投片后已获得所要求的功能。该芯片采用全定制设计,约有一万晶体管,芯片面积5.9×6.7mm~2。芯片设计全过程均在我们自己开发的 NPU VLSI CAD 系统上完成的。 相似文献
11.
通过对现有的IRIG-B(DC)码授时设备的调查研究发现,有的采用CPLD+AVR MCU实现方案,有的采用FPGA+DSP实现方案,芯片间连线较多,且PCB布线复杂。因此提出了采用ZYNQ器件实现IRIG-B(DC)码,数据交互主要在芯片内部实现,避免了芯片间较多连线,PCB设计简单,面积较小,有利于整机小型化设计。试验结果表明,采用新器件设计的IRIG-B(DC)码输出正常。 相似文献
12.
Wright R.G. Zgol M. Keeton S. Kirkland L.V. 《Aerospace and Electronic Systems Magazine, IEEE》2001,16(6):15-19
This paper describes original research efforts in the design, simulation, and development of nanotechnology-based molecular test equipment (MTE). This is a research effort for testing printed circuit boards independent of traditional automatic test equipment (ATE) through the fabrication of MTE within integrated circuits (ICs). The MTE is embedded within the IC substrate and encapsulated within nanoprobes that connect between the surface and the substrate of the IC at various functional areas. A process is followed whereby IC device simulation is performed to assess the electrical, chemical, and structural properties of integrated and adjacent substrate devices. Through this approach the nominal and failed device performance parameters of interest to substrate-based MTE are found. Discussion of the development and application of MTE within IC architectures is provided, including such topics as the effect of substrate composition on the design and realization of MTE, interfaces between MTE and IC devices, and reporting of MTE results to the IC surface and technician. Potential application areas within different device functions will also be identified. A chemical structure diagram is also provided to illustrate the implementation of MTE using discrete device configurations with MTE-augmented logic 相似文献
13.
14.
基于二维码技术的高校大型仪器设备信息管理系统 总被引:1,自引:0,他引:1
霍文杰 《沈阳航空工业学院学报》2007,24(2):90-92
针对高校大型仪器设备的基本信息管理特点和使用情况,结合二维条形码技术的特点,提出了一种基于二维码技术的高校大型仪器设备管理信息系统,并对实现这一系统的管理模型、系统的结构与特点以及实现这一系统相关的技术方案以及要解决的关键技术进行了探讨,并着重就二维条形码PDF 417的模板定制和手持数据采集器MC 50的程序设计等问题进行了有益的探讨。 相似文献
15.
无人机光电吊舱视频数据的实时压缩处理是无人机光电吊舱的关键技术之一.以DM368为核心处理器,以嵌入式Linux为板级操作系统,设计出一套可供无人机光电吊舱使用的低功耗视频实时压缩系统.与传统的嵌入式视频H.264软件编码压缩系统相比,本系统依赖DM368内嵌的视频协处理硬核处理H.264编码,具有功耗低、处理延迟小、外部电路简单等诸多优势.同时系统以嵌入式Linux为板级操作系统,实时性强,可稳定高效地管理视频采集、硬核调度、串口通信、数据输出等诸多任务. 相似文献
16.
Replacement strategy for aging avionics computers 总被引:1,自引:0,他引:1
Luke J. Bittorie J.W. Cannon W.J. Haldeman D.G. 《Aerospace and Electronic Systems Magazine, IEEE》1999,14(3):7-11
With decreasing defense dollars available to purchase new military aircraft, the inventory of existing aircraft will have to last many more years than originally anticipated. As the avionics computers on these aging aircraft get older, they become more expensive to maintain due to parts obsolescence. In addition, expanding missions and changing requirements lead to growth in the embedded software which, in turn, requires additional processing and memory capacity. Both factors, parts obsolescence and new processing capacity, result in the need to replace the old computer hardware with newer, more capable microprocessor technology. New microprocessors, however, are not compatible with the older computer instruction set architectures. This generally requires the embedded software in these computers to be rewritten. A significant savings-estimated in the billions of dollars-could be achieved in these upgrades if the new computers could execute the old embedded code along with any new code to be added. This paper describes a commercial-off-the-shelf (COTS)-based form, fit, function, and interface (F3I) replacement strategy for legacy avionics computers that can reuse existing avionics code “as is” while providing a flexible framework for incremental upgrades and managed change. It is based on a real-time embedded software technology that executes legacy binary code on the latest generation COTS microprocessors. This technology promises performance improvements of 5-10 times that of the legacy avionics computer that it replaces. It also promises a 4× decrease in cost and schedule over rewriting the code and provides a “known good” starting point for incremental upgrades of the embedded flight software. Code revalidation cost and risk are minimized since the structure of the embedded code is not changed, allowing the replacement computer to be retested at the “blackbox” level using existing qualification tests 相似文献
17.
根据某反坦克导弹动力装置的要求,设计了一种新型环形发动机装药,称为异型管状药柱。这种装药具有短时间工作提供大推力的特点,介绍了该药形的设计方法。 相似文献
18.
根据嵌入式网络技术的最新研究,对嵌入式设备的网络化接口技术,做了详细的分析。并以C8051F020单片机和CP2200以太网控制器为例,给出了网络接口模块设计的具体方案,阐述了系统的软硬件实现方法,对CP2200的实现进行了详细介绍,同时针对嵌入式网络的实际应用场合,对TCP/IP协议栈进行了精简,并介绍了各个模块的具体实现。 相似文献