A comparison of seasonal variations of sea level in the southern Baltic Sea from altimetry and tide gauge data

In this paper, seasonal sea level variations have been determined at five locations in the Baltic Sea from satellite altimetry for the period 1993–2015. The results were compared to tide gauge water level data. Annual and semi-annual amplitudes have been investigated for both sea level anomalies and tide gauge water level. It was found that the two independent observations of sea level variations along the Polish coast are in good agreement both in terms of their annual and semi-annual amplitudes and their annual and semi-annual phases. The annual cycles in the sea level variations measured by altimetry and tide gauge reach maximum values at approximately the same month (November/December).Moreover, this article shows the differences between the annual and semi-annual amplitudes and phases in the sea level anomalies and water level data within the same time frame. The difference in the annual amplitudes between the satellite altimetry and the tide gauge results is between 0.33?cm and 1.53?cm. The maximum differences in the annual cycle of the sea level changes were found at the Swinoujscie station. The correlations between the original series and the calculated curves were determined, and the relationship between the amplitudes and the phases were investigated. The correlation between the annual variations observed from the two independent observation techniques is 0.92.To analyse the dynamics of the change in sea level, the linear trend was estimated from the satellite altimetry and tide gauge time series both in the original time series of the data and in the time series in which seasonal variations were removed. In addition, we calculated the estimated errors of regression and how many years’ worth of data are needed to obtain an accuracy of 0.1?mm per year. The estimated errors of regression showed that to get an accuracy of 0.1?mm per year, we need 100?years of data.     

Analysis of coastal altimetry in the Mexican Caribbean

A reprocessing of sea-level anomalies (SLA) resulting from X-TRACK coastal altimetry was carried out for the ENVISAT (2002–2010) and TOPEX/POSEIDON-Jason (1992–2019) satellite missions in the coastal area of the Mexican Caribbean. This consisted of applying a tidal correction to coastal altimetry sea level observations. Harmonic analysis of five coastal tide gauge records was performed to estimate the most important tidal components of the area, resulting on M2, N2, O1, S2, K1, MF, and MM. The tidal signal was reconstructed with the seven tidal components using the TPXO9 model. The SLA signals corrected with the seven tidal components were validated with in situ data from coastal tide gauges. The validation showed that the TPXO9 tidal barotropic model (1/30° grid) used to reconstruct the tidal signal with the seven representative tidal components performed better than the FES2012 global model (1/16° grid) that uses 33 tidal components. The reprocessed SLAs showed clear seasonality with significant signals at 4, 6, and 12 months, with the annual signal being the dominant one. In the Mexican Caribbean coastal zone, oceanographic processes with different scales (from coastal to mesoscale) converge, showing their complexity in the different SLA signals observed. The aim of this work is to contribute to the analysis of coastal altimetry data and understanding the sea level variations in the Mexican Caribbean. This work is the first step in the implementation of methodologies that take advantage of coastal satellite altimetry in the Caribbean Sea.     

The X-TRACK/ALES multi-mission processing system: New advances in altimetry towards the coast

In the context of the ESA Climate Change Initiative project, a new coastal sea level altimetry product has been developed in order to support advances in coastal sea level variability studies. Measurements from Jason-1,2&3 missions have been retracked with the Adaptive Leading Edge Subwaveform (ALES) Retracker and then ingested in the X-TRACK software with the best possible set of altimetry corrections. These two coastal altimetry processing approaches, previously successfully validated and applied to coastal sea level research, are combined here for the first time in order to derive a 16-year-long (June 2002 to May 2018), high-resolution (20-Hz), along-track sea level dataset in six regions: Northeast Atlantic, Mediterranean Sea, West Africa, North Indian Ocean, Southeast Asia and Australia. The study demonstrates that this new coastal sea level product called X-TRACK/ALES is able to extend the spatial coverage of sea level altimetry data ~3.5 km in the land direction, when compared to the X-TRACK 1-Hz dataset. We also observe a large improvement in coastal sea level data availability from Jason-1 to Jason-3, with data at 3.6 km, 1.9 km and 0.9 km to the coast on average, for Jason-1, Jason-2 and Jason-3, respectively. When combining measurements from Jason-1 to Jason-3, we reach a distance of 1.2–4 km to the coast. When compared to tide gauge data, the accuracy of the new altimetry near-shore sea level estimations also improves. In terms of correlations with a large set of independent tide gauge observations selected in the six regions, we obtain an average value of 0.77. We also show that it is now possible to derive from the X-TRACK/ALES product an estimation of the ocean current variability up to 5 km to the coast. This new altimetry dataset, freely available, will provide a valuable contribution of altimetry in coastal marine research community.     

Estimates of vertical land motion along the southwestern coasts of Turkey from coastal altimetry and tide gauge data

The differences between coastal altimetry and sea level time series of tide gauges in between March 1993 and December 2009 are used to estimate the rates of vertical land motion at three tide gauge locations along the southwestern coasts of Turkey. The CTOH/LEGOS along-track coastal altimetry retrieves altimetric sea level anomalies closer to the coast than the standard along-track altimetry products. However, the use of altimetry very close to the coast is not found to improve the results. On the contrary, the gridded and interpolated AVISO merged product exhibits the best agreement with tide gauge data as it provides the smoothest variability both in space and time compared with along track altimetry data. The Antalya gauge to the south (in the Mediterranean Sea) and the Mentes/Izmir gauge to the west (in the Aegean Sea) both show subsidence while the Bodrum tide gauge to the south (in the Aegean Sea) shows no significant vertical land motion. The results are compared and assessed with three independent geophysical vertical land motion estimates like from GPS. The GIA effect in the region is negligible. The VLM estimates from altimetry and tide gauge data are in good agreement both with GPS derived vertical velocity estimates and those inferred from geological and archaeological investigations.     

Evaluation and improvement of coastal GNSS reflectometry sea level variations from existing GNSS stations in Taiwan

Global sea level rise due to an increasingly warmer climate has begun to induce hazards, adversely affecting the lives and properties of people residing in low-lying coastal regions and islands. Therefore, it is important to monitor and understand variations in coastal sea level covering offshore regions. Signal-to-noise ratio (SNR) data of Global Navigation Satellite System (GNSS) have been successfully used to robustly derive sea level heights (SLHs). In Taiwan, there are a number of continuously operating GNSS stations, not originally installed for sea level monitoring. They were established in harbors or near coastal regions for monitoring land motion. This study utilizes existing SNR data from three GNSS stations (Kaohsiung, Suao, and TaiCOAST) in Taiwan to compute SLHs with two methods, namely, Lomb–Scargle Periodogram (LSP)-only, and LSP aided with tidal harmonic analysis developed in this study. The results of both methods are compared with co-located or nearby tide gauge records. Due to the poor quality of SNR data, the worst accuracy of SLHs derived from traditional LSP-only method exceeds 1?m at the TaiCOAST station. With our procedure, the standard deviations (STDs) of difference between GNSS-derived SLHs and tide gauge records in Kaohsiung and Suao stations decreased to 10?cm and the results show excellent agreement with tide gauge derived relative sea level records, with STD of differences of 7?cm and correlation coefficient of 0.96. In addition, the absolute GNSS-R sea level trend in Kaohsiung during 2006–2011 agrees well with that derived from satellite altimetry. We conclude that the coastal GNSS stations in Taiwan have the potential of monitoring absolute coastal sea level change accurately when our proposed methodology is used.     

Coastal sea level measurements using a single geodetic GPS receiver

This paper presents a method to derive local sea level variations using data from a single geodetic-quality Global Navigation Satellite System (GNSS) receiver using GPS (Global Positioning System) signals. This method is based on multipath theory for specular reflections and the use of Signal-to-Noise Ratio (SNR) data. The technique could be valuable for altimeter calibration and validation. Data from two test sites, a dedicated GPS tide gauge at the Onsala Space Observatory (OSO) in Sweden and the Friday Harbor GPS site of the EarthScope Plate Boundary Observatory (PBO) in USA, are analyzed. The sea level results are compared to independently observed sea level data from nearby and in situ tide gauges. For OSO, the Root-Mean-Square (RMS) agreement is better than 5 cm, while it is in the order of 10 cm for Friday Harbor. The correlation coefficients are better than 0.97 for both sites. For OSO, the SNR-based results are also compared with results from a geodetic analysis of GPS data of a two receivers/antennae tide gauge installation. The SNR-based analysis results in a slightly worse RMS agreement with respect to the independent tide gauge data than the geodetic analysis (4.8 cm and 4.0 cm, respectively). However, it provides results even for rough sea surface conditions when the two receivers/antennae installation no longer records the necessary data for a geodetic analysis.     

Using altimetry and seafloor pressure data to estimate vertical deformation offshore: Vanuatu case study

Measuring ground deformation underwater is essential for understanding Earth processes at many scales. One important example is subduction zones, which can generate devastating earthquakes and tsunamis, and where the most important deformation signal related to plate locking is usually offshore. We present an improved method for making offshore vertical deformation measurements, that involve combining tide gauge and altimetry data. We present data from two offshore sites located on either side of the plate interface at the New Hebrides subduction zone, where the Australian plate subducts beneath the North Fiji basin. These two sites have been equipped with pressure gauges since 1999, to extend an on-land GPS network across the plate interface. The pressure series measured at both sites show that Wusi Bank, located on the over-riding plate, subsides by 11 ± 4 mm/yr with respect to Sabine Bank, which is located on the down-going plate. By combining water depths derived from the on-bottom pressure data with sea surface heights derived from altimetry data, we determine variations of seafloor heights in a global reference frame. Using altimetry data from TOPEX/Poseidon, Jason-1, Jason-2 and Envisat missions, we find that the vertical motion at Sabine Bank is close to zero and that Wusi Bank subsides by at least 3 mm/yr and probably at most 11 mm/yr.     

Monitoring coastal sea level using reflected GNSS signals

A continuous monitoring of coastal sea level changes is important for human society since it is predicted that up to 332 million people in coastal and low-lying areas will be directly affected by flooding from sea level rise by the end of the 21st century. The traditional way to observe sea level is using tide gauges that give measurements relative to the Earth’s crust. However, in order to improve the understanding of the sea level change processes it is necessary to separate the measurements into land surface height changes and sea surface height changes. These measurements should then be relative to a global reference frame. This can be done with satellite techniques, and thus a GNSS-based tide gauge is proposed. The GNSS-based tide gauge makes use of both GNSS signals that are directly received and GNSS signals that are reflected from the sea surface. An experimental installation at the Onsala Space Observatory (OSO) shows that the reflected GNSS signals have only about 3 dB less signal-to-noise-ratio than the directly received GNSS signals. Furthermore, a comparison of local sea level observations from the GNSS-based tide gauge with two stilling well gauges, located approximately 18 and 33 km away from OSO, gives a pairwise root-mean-square agreement on the order of 4 cm. This indicates that the GNSS-based tide gauge gives valuable results for sea level monitoring.     

Integrating Non-Tidal Sea Level data from altimetry and tide gauges for coastal sea level prediction

The main objective of this paper is to integrate Non-Tidal Sea Level (NSL) from the joint TOPEX, Jason-1 and Jason-2 satellite altimetry with tide gauge data at the west and north coast of the United Kingdom for coastal sea level prediction. The temporal correlation coefficient between altimetric NSLs and tide gauge data reaches a maximum higher than 90% for each gauge. The results show that the multivariate regression approach can efficiently integrate the two types of data in the coastal waters of the area. The Multivariate Regression Model is established by integrating the along-track NSL from the joint TOPEX/Jason-1/Jason-2 altimeters with that from eleven tide gauges. The model results give a maximum hindcast skill of 0.95, which means maximum 95% of NSL variance can be explained by the model. The minimum Root Mean Square Error (RMSe) between altimetric observations and model predictions is 4.99 cm in the area. The validation of the model using Envisat satellite altimetric data gives a maximum temporal correlation coefficient of 0.96 and a minimum RMSe of 4.39 cm between altimetric observations and model predictions, respectively. The model is furthermore used to predict high frequency NSL variation (i.e., every 15 min) during a storm surge event at an independent tide gauge station at the Northeast of the UK (Aberdeen).     

The challenges in long-term altimetry calibration for addressing the problem of global sea level change

Long-term change of the global sea level resulting from climate change has become an issue of great societal interest. The advent of the technology of satellite altimetry has modernized the study of sea level on both global and regional scales. In combination with in situ observations of the ocean density and space observations of Earth’s gravity variations, satellite altimetry has become an essential component of a global observing system for monitoring and understanding sea level change. The challenge of making sea level measurements with sufficient accuracy to discern long-term trends and allow the patterns of natural variability to be distinguished from those linked to anthropogenic forcing rests largely on the long-term efforts of altimeter calibration and validation. The issues of long-term calibration for the various components of the altimeter measurement system are reviewed in the paper. The topics include radar altimetry, the effects of tropospheric water vapor, orbit determination, gravity field, tide gauges, and the terrestrial reference frame. The necessity for maintaining a complete calibration effort and the challenges of sustaining it into the future are discussed.     

Vertical crustal motion derived from satellite altimetry and tide gauges,and comparisons with DORIS measurements

A somewhat unorthodox method for determining vertical crustal motion at a tide-gauge location is to difference the sea level time series with an equivalent time series determined from satellite altimetry. To the extent that both instruments measure an identical ocean signal, the difference will be dominated by vertical land motion at the gauge. We revisit this technique by analyzing sea level signals at 28 tide gauges that are colocated with DORIS geodetic stations. Comparisons of altimeter-gauge vertical rates with DORIS rates yield a median difference of 1.8 mm yr⁻¹ and a weighted root-mean-square difference of 2.7 mm yr⁻¹. The latter suggests that our uncertainty estimates, which are primarily based on an assumed AR(1) noise process in all time series, underestimates the true errors. Several sources of additional error are discussed, including possible scale errors in the terrestrial reference frame to which altimeter-gauge rates are mostly insensitive. One of our stations, Malè, Maldives, which has been the subject of some uninformed arguments about sea-level rise, is found to have almost no vertical motion, and thus is vulnerable to rising sea levels.     

A point-wise least squares spectral analysis (LSSA) of the Caspian Sea level fluctuations,using TOPEX/Poseidon and Jason-1 observations

The Caspian Sea has displayed considerable fluctuations in its water level during the past century. Knowledge of such fluctuation is vital for understanding the local hydrological cycles, climate of the region, and construction activities within the sea and along its shorelines. This study established a point-wise satellite altimetry approach to monitor the fluctuations of the Caspian Sea using a complete dataset of TOPEX/Poseidon for the period 1993 to the middle of 2002, and its follow-on Jason-1 for the period 2002 to August 2009. Therefore, 280 virtual time-series were constructed to monitor the fluctuations. The least squares spectral analysis (LSSA) method is, then employed to find the most significant frequencies of the time-series, while the statistical method of principle component analysis (PCA) is applied to extract the dominant variability of level variations. The study also used the observations of TOPEX/Poseidon and Jason-1 over the Volga River along with 5 years of Volga’s water discharge to study its influence on the Caspian Sea level changes. The LSSA results indicate that the lunar semidiurnal (M2) and the Sun semidiurnal (S2) frequencies are the main tidal frequencies of the Caspian Sea with the mean amplitude of 4.2 and 2.8 cm, respectively. A statistically significant long-term frequency (12.5-years period) is also found from altimetry and tide gauge observations. A phase lag, related to the inter-annual frequencies of the Volga River was detected from the point-wise time-series showing level propagation from the northwest to the southeast of the sea. The cross-correlation between the power spectrum of Volga and that of the northern-most, middle, and southern-most points within the Caspian Sea were respectively 0.63, 0.51 and 0.4 of zero-lag correlation, corroborating the influence of the Volga River. The result of PCA also shows that different parts of the Caspian Sea exhibit different amplitudes of level variations, indicating that the point-wise approach, when employing all available satellite measurements could be a suitable method for a preliminary monitoring of this inland water resource as it gives accurate local fluctuations.     

Coastal sea level changes in Europe from GPS,tide gauge,satellite altimetry and GRACE, 1993–2011

Sea level changes are threatening the human living environments, particularly along the European Coasts with highly dense population. In this paper, coastal sea level changes in western and southern Europe are investigated for the period 1993–2011 using Global Positioning System (GPS), Tide Gauge (TG), Satellite Altimetry (SA), Gravity Recovery and Climate Experiment (GRACE) and geophysical models. The mean secular trend is 2.26 ± 0.52 mm/y from satellite altimetry, 2.43 ± 0.61 mm/y from TG+GPS and 1.99 ± 0.67 mm/y from GRACE mass plus steric components, which have a remarkably good agreement. For the seasonal variations, annual amplitudes of satellite altimetry and TG+GPS results are almost similar, while GRACE Mass+Steric results are a little smaller. The annual phases agree remarkably well for three independent techniques. The annual cycle is mainly driven by the steric contributions, while the annual phases of non-steric (mass component) sea level changes are almost a half year later than the steric sea level changes.     

Towards development of a consistent orbit series for TOPEX,Jason-1, and Jason-2

The TOPEX/Poseidon, Jason-1 and Jason-2 set of altimeter data now provide a time series of synoptic observations of the ocean that span nearly 17 years from the launch of TOPEX in 1992. The analysis of the altimeter data including the use of altimetry to monitor the global change in mean sea level requires a stable, accurate, and consistent orbit reference over the entire time span. In this paper, we describe the recomputation of a time series of orbits that rely on a consistent set of reference frames and geophysical models. The recomputed orbits adhere to the IERS 2003 standards for ocean and earth tides, use updates to the ITRF2005 reference frame for both the SLR and DORIS stations, apply GRACE-derived models for modeling of the static and time-variable gravity, implement the University College London (UCL) radiation pressure model for Jason-1, use improved troposphere modeling for the DORIS data, and apply the GOT4.7 ocean tide model for both dynamical ocean tide modeling and for ocean loading. The new TOPEX orbits have a mean SLR fit of 1.79 cm compared to 2.21 cm for the MGDR-B orbits. These new TOPEX orbits agree radially with independent SLR/crossover orbits at 0.70 cm RMS, and the orbit accuracy is estimated at 1.5–2.0 cm RMS over the entire TOPEX time series. The recomputed Jason-1 orbits agree radially with the Jason-1 GDR-C orbits at 1.08 cm RMS. The GSFC SLR/DORIS dynamic and reduced-dynamic orbits for Jason-2 agree radially with independent orbits from the CNES and JPL at 0.70–1.06 cm RMS. Applying these new orbits, and using the latest altimeter corrections for TOPEX, Jason-1, and Jason-2 from September 1992 to May 2009, we find a global rate in mean sea level of 3.0 ± 0.4 mm/yr.     

GNSS-R open-loop difference phase altimetry: Results from a bridge experiment

The paper explores a method to obtain accurate lake surface heights using measurements of the Global Navigation Satellite System (GNSS) carrier phase reflected from the lake surface. The method is referred to as Global Navigation Satellite System-Reflection (GNSS-R) open-loop difference phase altimetry method. It consists of two key technologies: one is the open-loop tracking method to track the GNSS-R signals, where the direct GNSS signal’s frequency is used as a reference frequency to obtain the carrier phases of the GNSS-R signals; the other key technology is time difference phase altimetry method to invert the lake surface heights using two or more carrier phases of GNSS-R signals received simultaneously. A validation experiment is carried out on the SANYING bridge over GUANTING lake using a GNSS-R receiver developed by the Center for Space Science and Applied Research (CSSAR), processing the data with GNSS-R open-loop difference phase altimetry method. The lake surface height results are consistent with the height results of GPS dual-frequency differential positioning altimetry. The results show that we can achieve centimeter level height in one minute average, by using 11 minutes carrier phase data of three GNSS-R signals received simultaneously.     

Detection of Envisat RA2/ICE-1 retracked radar altimetry bias over the Amazon basin rivers using GPS

Altimetry is now routinely used to monitor stage variations over rivers, including in the Amazon basin. It is desirable for hydrologic studies to be able to combine altimetry from different satellite missions with other hydrogeodesy datasets such as leveled gauges and watershed topography. One requirement is to accurately determine altimetry bias, which could be different for river studies from the altimetry calibrated for deep ocean or lake applications. In this study, we estimate the bias in the Envisat ranges derived from the ICE-1 waveform retracking, which are nowadays widely used in hydrologic applications. As a reference, we use an extensive dataset of altitudes of gauge zeros measured by GPS collocated at the gauges. The thirty-nine gauges are spread along the major tributaries of the Amazon basin. The methodology consists in jointly modeling the vertical bias and spatial and temporal slope variations between altimetry series located upstream and downstream of each gauge. The resulting bias of the Envisat ICE-1 retracked altimetry over rivers is 1.044 ± 0.212 m, revealing a significant departure from other Envisat calibrations or from the Jason-2 ICE-1 calibration.     

基于半无码的P(Y)码自相关GNSS-R海面测高方法

针对传统GPS C/A码延迟测高方法测高精度低和互相关测高方法时延波形信噪比低的问题,研究了基于半无码的P（Y）码自相关海面测高方法。首先,通过理论测高精度模型,对比分析了C/A码和P（Y）码的测高精度;然后,描述了L1、L2双频反射信号基于半无码的P（Y）码自相关处理架构,并论述了测高模型和L1、L2双频电离层时延误差修正方法;最后,利用模拟的L1、L2反射信号对比分析了基于半无码的P（Y）码自相关、C/A码自相关以及信号互相关方法的海面测高精度。结果表明:相比于C/A码自相关和信号互相关测高精度,基于半无码的P（Y）码自相关的测高精度分别提高了3.97倍和1.47倍。      

Influence of time variable geopotential models on precise orbits of altimetry satellites,global and regional mean sea level trends

During the last decade a significant progress has been reached in the investigation of the gravity field of the Earth. Besides static, also time variable geopotential models have been recently created. In this paper we investigate the impact of the recent time variable geopotential models on altimetry satellite orbits and such altimetry products based on these orbits, as global and regional mean sea level trends. We show that the modeling of time variable gravity improves the orbit solutions, at least for the GRACE period where time variable gravity is sufficiently accurately observed by this mission. Our analysis includes six geopotential models jointly developed by GFZ German Research Centre for Geosciences and Space Geodesy Research Group (CNES/GRGS) Toulouse: the stationary model EIGEN-GL04S, a stationary version of EIGEN-6S (EIGEN-6S_stat), a corrected version of EIGEN-6S and three enhanced versions of EIGEN-6S called EIGEN-6S2, EIGEN-6S2A and EIGEN-6S2B. By “stationary” we mean “containing periodic parameters such as annual and semi-annual variations, but no secular (drift) terms”. We computed precise orbits for the radar altimetry satellites ERS-1, ERS-2, TOPEX/Poseidon, and Envisat over 20 years between 1991 and 2011. The orbit, single-mission and multi-mission altimetry crossover analyses show that the time variable models EIGEN-6S_corrected, EIGEN-6S2 and its two precursors EIGEN-6S2A/B perform notably better than the stationary models for the GRACE period from 2003 onwards. Thus, using EIGEN-6S2 and EIGEN-6S2A/B we have got 3.6% smaller root mean square fits of satellite laser ranging observations for Envisat, as when using EIGEN-GL04S. However, for the pre-GRACE period 1991–2003, the stationary geopotential models EIGEN-GL04S and EIGEN-6S_stat as well as EIGEN-6S2 having no drift terms for degree 3–50 at this time interval perform superior compared to EIGEN-6S_correct and EIGEN-6S2A/B which contain drifts for this period. We found, that the time variable geopotential models have a low (0.1–0.2 mm/yr) impact on our results for the global mean sea level trend. However, we found strong East/West differences up to 3 mm/yr in the regional mean sea level trends when using orbits of all four satellites based on time variable and stationary geopotential models. We show that these differences are related to the relative drifts of the centers-of-origin between the orbit solutions based on the time variable and stationary geopotential models. From the results of our detailed study, we conclude that the final version of the time variable gravity field model EIGEN-6S2 performs best for the four satellites tested. This model provides the most reliable and mission-consistent sea level estimates for the whole time period from 1992 to 2010. This model is of maximum spherical harmonic degree and order 260 and contains time series for drifts as well as annual and semiannual variations of the spherical harmonic coefficients for degree 2–50.     

Multi- GNSS reflectometry performance evaluation for coastal sea level monitoring: A case study in Antarctic Peninsula

Antarctica is a continent that crucial for studying climate change and its progression across time, as well as analyzing and forecasting local and global change. In this environment, due to the challenges caused by sea-level rise, storm surges, and tsunamis, sustainability is a critical concern, particularly for coastal regions. As a result, the long-term observations that will be conducted in Antarctica are critical for monitoring the adverse impacts of climate change. In recent years, many monitoring approaches, both space, and ground-based are performed to monitor sea/ice level trends in space-based scientific investigations conducted in and around the region. In the study, based on one year of observations from the Palmer GNSS Station, the GNSS Reflectometry technique was used to measure the sea level on the Antarctic Peninsula (PALM). GNSS Station observations were analyzed with a Lomb-Scargle periodogram to monitor sea-level changes, and results were validated with data from a co-located tide gauge (TG). The results show that the correlation between GNSS-R sea-level changes and tidal sea-level changes is found as 0.91.