DFBW飞机人-机闭环纵向着陆特性研究

本文根据试飞员的飞行体会和一组试飞曲线,提出驾驶员参数随着着陆过程变化的频率域模型,建立装有DFBW飞机的人-机闭环系统数学模型,编制非线性全量时域仿真程序,对纵向着陆过程动态作了全面的定量分析,其结果与装有MCS飞机的试飞情况吻合,验证了本文建模、程序可信度和精度,从而得出某DFBW飞机着陆特性是可被驾驶员接受的一些有益结论。     

Prediction of nonlinear pilot-induced oscillation using an intelligent human pilot model

This paper proposes a method to predict nonlinear Pilot-Induced Oscillation (PIO) using an intelligent human pilot model. This method is based on a scalogram-based PIO metric, which uses wavelet transforms to analyze the nonlinear characteristics of a time-varying system. The intelligent human pilot model includes three modules: perception module, decision and adaptive module, and execution module. Intelligent and adaptive features, including a neural network receptor, fuzzy decision and adaptation, are also introduced into the human pilot model to describe the behavior of the human pilot accommodating the nonlinear events. Furthermore, an algorithm is proposed to describe the procedure of the PIO prediction method with nonlinear evaluation cases. The prediction results obtained by numerical simulation are compared with the assessments of flight test data to validate the utility of the method. The flight test data were generated in the evaluation of the Smart-Cue/Smart-Gain, which is capable of reducing the PIO tendencies considerably. The results show that the method can be applied to predict the nonlinear PIO events by human pilot model simulation.     

Prediction of pilot workload in helicopter landing after one engine failure

This paper presents a method to predict the pilot workload in helicopter landing after one engine failure. The landing procedure is simulated numerically via applying nonlinear optimal control method in the form of performance index, path constraints and boundary conditions based on an augmented six-degree-of-freedom rigid-body flight dynamics model, solved by collocation and numerical optimization method. UH-60A helicopter is taken as the sample for the demonstration of landing after one engine failure. The numerical simulation was conducted to find the trajectory of helicopter and the controls from pilot for landing after one engine failure with different performance index considering the factor of pilot workload. The reasonable performance index and corresponding landing trajectory and controls are obtained by making a comparison with those from the flight test data. Furthermore, the pilot workload is evaluated based on wavelet transform analysis of the pilot control activities. The workloads of pilot control activities for collective control, longitudinal and lateral cyclic controls and pedal control during the helicopter landing after one engine failure are examined and compared with those of flight test. The results show that when the performance index considers the factor of pilot workload properly, the characteristics of amplitudes and constituent frequencies of pilot control inputs in the optimal solution are consistent with those of the pilot control inputs in the flight test. Therefore, the proposed method provides a tool of predicting the pilot workload in helicopter landing after one engine failure.     

基于喘振裕度估计模型的发动机高稳定性控制

为解决超机动飞行中发动机喘振裕度不可测量的难题,提出一种发动机喘振裕度的建模方法.喘振裕度的模型分为常规飞行时的无畸变模型与超机动飞行时的损失量模型两部分.无畸变模型是基于喘振裕度特征选择算法筛选最优模型输入,以非线性拟合方法建模实现;损失量模型则基于在线攻角预测模型实时评估发动机进口畸变度,进而计算获得.而后利用上述估计模型对发动机的稳定性进行实时预测,在不改变发动机原控制回路的基础上,对涡轮落压比控制指令进行喘振损失补偿,实现高稳定性控制.最后,通过大攻角机动飞行的数字仿真,验证了上述方案可以准确控制发动机喘振裕度在11%~13%,保证了发动机工作的稳定性和高效性.      

基于辅助进气门的进气道/发动机一体化稳定性控制研究

为了实现发动机在大机动飞行时高品质稳定运行,提出了一种基于辅助进气门调节的进气道/发动机一体化稳定性控制方法。基于进气道CFD模型,通过飞行条件和辅助进气门开度计算出口性能参数,考虑总压畸变对风扇特性的影响,建立了进气道实时模型和总压畸变模型,并将其与发动机部件级模型匹配,建立进/发一体化模型。为了直接控制发动机安全裕度,选取发动机部分可测参数作为输入,通过非线性拟合方法建立风扇喘振裕度实时估计模型,相比于直接压比控制可以充分发挥发动机的潜能。进/发一体化控制是通过调节辅助进气门开度,控制进气道出口总压恢复系数,以满足发动机进口截面需求,并基于H∞鲁棒控制实现对发动机的转速和安全裕度的控制。仿真结果表明,所提出的方法可以实现发动机在大机动飞行过程中安全稳定工作,推力损失不超过2%。     

An experimental analysis of situation awareness for cockpit display interface evaluation based on flight simulation

Aircraft cockpit display interface (CDI) is one of the most important human-machine interfaces for information perceiving. During the process of aircraft design, situation awareness (SA) is frequently considered to improve the design, as the CDI must provide enough SA for the pilot to maintain the flight safety. In order to study the SA in the pilot-aircraft system, a cockpit flight simulation environment is built up, which includes a virtual instrument panel, a flight visual display and the corresponding control system. Based on the simulation environment, a human-in-the-loop experiment is designed to measure the SA by the situation awareness global assessment technique (SAGAT). Through the experiment, the SA degrees and heart rate (HR) data of the subjects are obtained, and the SA levels under different CDI designs are analyzed. The results show that analyzing the SA can serve as an objective way to evaluate the design of CDI, which could be proved from the consistent HR data. With this method, evaluations of the CDI design are performed in the experimental flight simulation environment, and optimizations could be guided through the analysis.     

飞机-驾驶员闭环系统模糊预见控制器设计

针对驾驶员操纵延迟和飞机不确定性所导致的人-机系统跟踪性能降低的问题,提出一种基于T-S模糊模型的鲁棒预见辅助驾驶方法。建立驾驶员-飞机时滞不确定T-S模糊模型,引入预见控制思想补偿驾驶员延迟,以跟踪误差和驾驶员操纵负担为性能指标,将存在模型不确定性的人-机指令跟踪问题转化为模糊最优保性能控制问题,并推导了该凸优化所应满足的线性矩阵不等式。为克服预见步数增多引起增广系统维数较大、进而导致线性矩阵不等式不易求解的缺陷,设计了一种次优的预见控制器。最后,分别通过驾驶员模型仿真和飞行模拟器实验,验证了所设计的模糊预见控制器的有效性。     

倾转旋翼机动态倾转过渡过程的操纵策略优化

利用最优控制方法研究倾转旋翼机的最优动态倾转过渡过程,并得到最优操纵策略,使得由时间、姿态角变化以及驾驶员工作负荷等组成的性能指标达到最小。首先,在基本纵向刚体飞行动力学模型的基础上引入混合操纵方程,并使用杆量位移的一阶导数作为控制量,形成适用于计算倾转旋翼机动态倾转过渡过程的飞行动力学模型,从而能在动态倾转操纵策略优化过程中考虑到操纵系统特性对操纵量变化速度的限制,以及避免操纵量在优化过程中出现跳跃不连续。然后,将倾转旋翼机的最优动态倾转过渡过程转化为非线性动态最优控制问题,建立合理的性能指标,并采用直接转换法和序列二次规划算法进行求解。最后,以XV-15倾转旋翼机为样机,分别计算正向和逆向最优动态倾转过渡过程,并与驾驶员飞行仿真数据进行对比。结果表明:飞行状态量的时间历程与文献吻合地较好,且俯仰姿态角和杆量位移变化更加柔和。最优控制方法可以用于研究倾转旋翼机的最优动态倾转过渡过程。     

Augmented flight dynamics model for pilot workload evaluation in tilt-rotor aircraft optimal landing procedure after one engine failure

An augmented flight dynamics model is developed to extend the existing flight dynamics model of tilt-rotor aircraft for optimal landing procedure analysis in the event of one engine failure.Compared with the existing flight dynamics model, the augmented model involves with more pilot control information in cockpit and is validated against the flight test data. Based on the augmented flight dynamics model, the optimal landing procedure of XV-15 tilt-rotor aircraft after one engine failure is formulated into a Nonlinear Optimal Control Problem(NOCP), solved by collocation and numerical optimization method. The time histories of pilot controls in cockpit during the optimal landing procedure are obtained for the evaluation of pilot workload. An evaluation method which can synthetically quantify the pilot workload in time and frequency domains is proposed with metrics of aggressiveness and cutoff frequencies of pilot controls. The scale of the pilot workload is compared with those of the shipboard landing procedures, bob-up/bob-down and dash/quickstop maneuvers of UH-60 helicopter. The results show that the aggressiveness of pilot collective and longitudinal controls for the tilt-rotor aircraft optimal landing procedure after one engine failure are higher than those for UH-60 helicopter shipboard landing procedures up to the condition of sea state 4, while the pilot cutoff frequency of collective control is lower than that of the bob-up/bob-down maneuver but the pilot cutoff frequency of longitudinal control is higher than that of the dash/quick-stop maneuver. The evaluated pilot workload level is between Cooper–Harper HQR Level 2 and Level 3.     

仪表飞行程序运行安全性评价模型与仿真分析

为对飞行程序设计与运行的安全性进行定量分析,需建立评价指标测度模型。从超障安全和飞行冲突风险水平两方面分析了影响飞行程序安全性的主要因素,提出了飞行程序运行的近地风险模型、飞行程序运行交通流内部以及不同飞行程序运行交通流之间的冲突强度和累计风险模型。以实际的进离场飞行程序为例开展仿真实验,提出了安全指标量化分析的方法,揭示了飞行程序构型、布局等影响安全性的规律。实验结果表明,该模型能客观地反映飞行程序安全性且有计算简便的特点。     

Conceptual design and preliminary experiment of icing risk management and protection system

Icing is one of the main external environmental factors that causes aircraft to lose control. The flight safety assurance system under icing condition is particularly important. However,most of the systems do not consider the coupling characteristics of aerodynamics and flight dynamics of icing aircraft. This will affect the accuracy of the calculation results. Besides, the icing risk management system helps the pilot to realize the possible dangers in advance and perform correct maneuvers, base...     

基于人的因素的平行航路碰撞风险模型

航路飞行过程中管制员与飞行员是影响安全的主要因素。分析管制员和飞行员操作可靠性的影响因素,运用模糊综合评价方法量化管制员和飞行员飞行操作中的可靠性,并利用概率知识建立基于管制员和飞行员的可靠性平行航路碰撞风险模型,通过实例计算表明,该模型能很好地对平行航路碰撞风险进行评估,验证了模型的可行性、有效性。     

应用时间裕度法评估人-机系统飞行安全

采用临界参数确定飞行风险,提出了安全飞行时间裕度概念,根据安全飞行时间裕度和飞行员操纵干预滞后时间评估飞行安全。研究了不利因素影响下的飞行员操纵干预滞后特性。给出了临界参数分别为过载和高度时,飞行安全时间裕度的计算方法。实现了对人-机系统飞行安全的定量评估,并给出了风险概率。     

冲偏出跑道事件风险影响指标分析

目前对冲偏出跑道风险的研究多基于事故统计数据,较少从飞行数据及飞行操作特征的角度进行分析。基于飞行数据,对冲偏出跑道事件开展风险分析。将飞行数据分为飞行状态、操作指令、信息3 类,以此研究飞机在起飞滑跑、着陆、着陆滑跑3 个阶段的状况及风险影响指标;通过数据所反映的操作特征,结合标准操作程序,推导出飞机偏离正常数据、与标准操作不相符的操作,得到影响正常飞行的风险因素;基于行为安全2-4 模型,建立冲偏出跑道风险评价指标体系,对实际案例的事故致因机理进行研究,着重分析操作特征及人为因素,并提出冲偏出跑道风险防控措施。结果表明：通过对飞行操作特征及飞行参数的分析,从操作类、数据类以及环境类3 个维度建立风险影响指标体系,可以降低指标因素对冲偏出跑道事件的影响;从人、机、环、管方面提出改进措施,可有效降低冲偏出跑道事件发生的概率。     

地形冲突回避控制原理的研究

地形冲突是指飞行器与地面之间的相对位置发生矛盾,可能导致可控飞行撞地事故(CFIT)发生的潜在危险现象。在飞机飞行过程中,飞行员瞬间丧失知觉是飞行员自身因素导致飞行事故的一个重要问题,这个问题困扰着所有飞高性能战斗机的空军及其飞行员人员。丧失空间方向感又是一个更为严重的问题,它影响着空军和民航的飞行员人员。为了防止由于自身因素引起的飞行员和飞机的巨大损失,研究自动地形冲突回避系统是必要的。通过对地形冲突回避控制原理三种方案的研究分析表明:一种不需要飞行员涉入,一种需要飞行员涉入,即所谓人在回路之中,一种需要对外发射信号。     

Water takeoff performance calculation method for amphibious aircraft based on digital virtual flight

Owing to the strong coupling among the hydrodynamic forces, aerodynamic forces and motion of amphibious aircraft during the water takeoff process, the water takeoff performance is difficult to calculate accurately and quickly. Based on an analysis of the dynamics and kinematics characteristics of amphibious aircraft and the hydrodynamic theory of high-speed planing hulls, a suitable mathematical model is established for calculating the hydrodynamics of aircraft during water takeoff. A pilot model is designed to illustrate how pilots are affected by the lack of visual reference and the necessity to simultaneously control the pitch angle, flight velocity and other parameters during water takeoff. Combined with the aerodynamic model, engine thrust model and aircraft motion model, a digital virtual flight simulation model is developed for amphibious aircraft during water takeoff, and a calculation method for the water takeoff performance of amphibious aircraft is proposed based on digital virtual flight. Typical performance indicators, such as the liftoff time and liftoff distance, can be obtained via digital virtual flight calculations. A comparison of the measured flight test data and the calculation results shows that the calculation error is less than 10%, which verifies the correctness and accuracy of the proposed method. This method can be used for the preliminary evaluation of airworthiness compliance of amphibious aircraft design schemes, and the relevant calculation results can also provide a theoretical reference for the formulation of flight test plans for airworthiness certification.     

Data communications concept for a SATS scenario

The small aircraft transportation system (SATS) concept envisions doorstop to destination transportation in a safe and timely manner. Data communications are a key component in achieving the aviation-related operational performance improvements that are sought. However, data communication doesn't start when you get into the aircraft; it starts back at the location where the flight is planned. In fact, data communications support the pilot in all phases of the flight: flight planning, pre-flight, departure, en route, transition, approach, landing, and rollout as well as for a missed approach. The Internet is being used to perform flight planning activities, and the mobile communications available today support Internet access en route to the departure airfield. On-board the aircraft, data communications provide surveillance and air traffic control (ATC) support to the pilot. The location of other aircraft is available to the pilot and ATC system through automatic dependent surveillance-broadcast (ADS-B) and traffic information service-broadcast (TIS-B) applications that transmit the location of other aircraft in the vicinity. Other aircraft locations are used to forecast potential conflicts and, thus, enhance flight safety. As the aircraft nears a SATS-equipped airfield, the pilot uses data link messages to request a landing sequence. The airport management module (AMM) provides a landing sequence assignment to the aircraft. As the pilot maneuvers the aircraft for a landing, he/she is using data-linked surveillance data to determine the location of other aircraft and maintain a safe separation distance between aircraft even in a low visibility environment.     

突风对着陆飞机下滑飞行的安全性影响

突风会引起飞机过载和飞行状态的改变,威胁飞机飞行安全。在飞机六自由度运动学方程的基础上,根据下滑飞行中驾驶员操纵行为的特点建立了飞机驾驶员的数学模型,并考虑突风的影响,建立了“驾驶员-飞机-突风”闭环飞机的数学仿真模型。通过引入飞机飞行安全性的量化评估理论以及表征方法,并根据飞机的飞行状态对飞机的安全性进行量化分析。选取某型飞机着陆下滑过程中进入突风风场的飞行状态进行仿真研究,结果表明风会改变飞机的气动角和空速,导致飞机的过载及飞行轨迹发生变化,尤其在飞机飞行高度较低时,风扰引起的大 但目前的研究主要集中在以阵风减缓设计为目的的 迎角姿态和飞机飞行轨迹变化将威胁飞机的飞行安全。     

基于案例知识的系统安全风险模型

对基于案例知识的系统安全风险模型进行了研究。首先,建立了系统安全事件案例知识表达模型。其次,研究了系统知识表达的不确定性问题,以及安全风险决策者的决策类型对度量不确定性的需求;基于现有安全风险模型对不确定性度量能力的欠缺,提出了基于案例知识的系统安全风险概念模型,用损失可能性、损失程度和损失的不确定性来表征系统安全风险。在此基础上,研究了该安全风险模型的建模方法,并举例证明了该模型的有效性。最后,对机长飞行安全风险进行了研究,选取机长年龄、累计飞行小时以及近90天飞行小时3个指标作为风险因子,应用本文所建基于案例知识的系统安全风险模型,评估了机长飞行安全风险,评估结果合理,可为民航放飞决策提供参考。