倾转旋翼机巡航状态旋翼滑流影响

倾转旋翼机由于需要兼顾垂直起降和高速平飞2种典型工况下的动力需求，采用大直径旋翼作为推进装置会使机翼大部分处于旋翼滑流区内，这与常规螺旋桨飞机存在较大差异。为评估不同数值计算方法并研究旋翼滑流对倾转旋翼机气动特性的影响，针对选取两叶旋翼的某倾转旋翼机方案，利用激励盘模型、多参考系（MRF）模型、滑移网格模型分别进行了巡航状态下旋翼滑流对全机气动特性影响的数值模拟研究。结果表明:相对于无滑流状态，滑流定常影响使全机阻力增大，最大升阻比降低了7.5%，尾翼产生的升力增大，纵向静稳定度增加了17.1%，全机低头力矩增大；当迎角较小时，滑流虽然改变了机翼表面的升力分布，但是全机升力变化不大；滑流非定常影响会使全机气动特性产生周期性波动，升力系数波动幅度为9.0%，阻力系数波动幅度为10.8%，并且随着迎角的增大，波动幅度也越大。      

Evaluation of a regional real-time precise positioning system based on GPS/BeiDou observations in Australia

The performance of real-time (RT) precise positioning can be improved by utilizing observations from multiple Global Navigation Satellite Systems (GNSS) instead of one particular system. Since the end of 2012, BeiDou, independently established by China, began to provide operational services for users in the Asia-Pacific regions. In this study, a regional RT precise positioning system is developed to evaluate the performance of GPS/BeiDou observations in Australia in providing high precision positioning services for users. Fixing three hourly updated satellite orbits, RT correction messages are generated and broadcasted by processing RT observation/navigation data streams from the national network of GNSS Continuously Operating Reference Stations in Australia (AUSCORS) at the server side. At the user side, RT PPP is realized by processing RT data streams and the RT correction messages received. RT clock offsets, for which the accuracy reached 0.07 and 0.28?ns for GPS and BeiDou, respectively, can be determined. Based on these corrections, an accuracy of 12.2, 30.0 and 45.6?cm in the North, East and Up directions was achieved for the BeiDou-only solution after 30 min while the GPS-only solution reached 5.1, 15.3 and 15.5?cm for the same components at the same time. A further improvement of 43.7, 36.9 and 45.0 percent in the three directions, respectively, was achieved for the combined GPS/BeiDou solution. After the initialization process, the North, East and Up positioning accuracies were 5.2, 8.1 and 17.8?cm, respectively, for the BeiDou-only solution, while 1.5, 3.0, and 4.7?cm for the GPS-only solution. However, we only noticed a 20.9% improvement in the East direction was obtained for the GPS/BeiDou solution, while no improvements in the other directions were detected. It is expected that such improvements may become bigger with the increasing accuracy of the BeiDou-only solution.     

高教机天线布局影响通讯距离研究与改进

某型高级教练机在试飞中,出现空地通讯距离不满足战技指标要求的问题。经过分析发现,由于超短波电台天线作为单极天线,其安装布局未满足天线本身要求,即接地面尺寸过小、近场区环境复杂等,导致天线辐射性能受到影响。本文对天线阻抗和方向性系数进行了研究分析,并根据飞机情况制定相应的改进方案。     

民用飞机静气动弹性载荷计算方法研究

以某大型客机为例,根据气动外形利用有限元软件PANTRAN建立高阶气动面元,利用ZONAIR静气动弹性方法,分析了其弹性载荷,包含气动力系数、过载、迎角,并与刚性载荷进行了对比。此方法合理可靠,可用于民用飞机的弹性载荷设计分析。     

基于混合控制集预测控制的永磁同步电机电流脉动抑制方法

模型预测控制(MPC)技术近年来在高动态性能电机驱动系统中应用广泛。为了克服传统MPC技术中有限控制集(FCS)造成的稳态电流脉动问题,提出了一种基于混合控制集(MCS)预测控制的永磁同步电机(PMSM)电流脉动抑制方法。分析建立PMSM预测控制系统离散数学模型,并分析电压矢量精度与电流脉动之间的关联性；在此基础上,MCSMPC将电压源型逆变器有限的有效电压矢量数,扩展为多个以占空比形式存在的虚拟电压矢量,并基于上述虚拟电压矢量完成MPC优化问题在线求解；此外,考虑到MCSMPC系统的参数敏感性问题,对MCSMPC系统反馈噪声问题进行分析讨论。最后,搭建双15 kW PMSM对拖样机测试平台进行试验分析,分析内容包括MCS方法动态跟踪特性、电流脉动稳态效果。试验结果表明所提出的MCSMPC方法在保留了传统预测控制技术高动态响应的基础上,可有效降低PMSM稳态电流脉动幅度和运行噪声。     

民用飞机发动机吊挂部段静力试验与静强度分析

根据民用飞机发动机吊挂部段静力试验技术需求,研制了一套用于吊挂部段静力试验的试验系统,解决了吊挂支持模拟、加载边界模拟等关键技术,完成了吊挂应急着陆、航向侧移两种危险工况试验,并结合试验台架-吊挂有限元分析模型对吊挂进行了静强度分析.试验结果表明,试验系统工作稳定可靠,吊挂在应急着陆等工况下未发生有害塑性变形,其强度、刚度满足设计要求.对比显示:试验最大应力与有限元分析相对误差均小于8％,验证了分析模型的准确性.试验结果可作为民用飞机发动机吊挂部段强度性能的评定依据,有限元建模方法可应用于吊挂部段改型设计.     

多模型直接自适应执行器故障补偿控制系统

为了更快更好地补偿执行器故障带来的不确定性,发展了一种新的多模型自适应执行器故障补偿控制系统设计方法。首先,分析所有可能的执行器故障模式,得到故障模式集。再针对每一种故障模式,分别进行控制器设计,控制器设计时采用直接模型参考自适应执行器故障补偿控制方法进行设计。然后根据参数估计误差分别计算每种故障模式下系统的性能损失函数,选择性能损失最小的子系统对应的控制器作为当前的全局控制器。最后以飞行控制系统为例进行了仿真,仿真结果表明,所设计的多模型直接自适应执行器故障补偿系统闭环稳定,且有良好的跟踪性能。     

空间站空间因特网与空间通信链路设计

为改善在空间站长期值守的航天员的业务生活,提出建立空间站网吧,为航天员提供因特网服务的构想。为此分析研究空间站空间因特网服务系统及其关键技术,提出空间站空间因特网服务系统构建方案。结合这一系统构建方案,一是研究解决了支持复杂异构网络运行的空间因特网网络协议设计技术,空间站空间因特网直接采用TCP/IP协议,并通过系统设计,较好地克服了TCP/IP协议不能适应空间通信链路的难题,支持采用基于TCP/IP协议的商用货架(COTS)软、硬件产品,可明显降低空间站空间因特网服务系统建设与维护成本;二是研究解决了涉及空间站测控通信网运行安全和空间信息安全的空间通信链路设计技术,空间站在同一条空间通信链路同时传输空间因特网数据和空间站测控通信数据,空间通信链路采用CCSDS的AOS协议,并通过建立虚拟的物理信道,解决了空间因特网数据和空间站测控通信数据的安全隔离问题,能满足空间站测控通信网运行安全和空间信息安全的要求。     

Radio fine structures in dm–cm wavelength range associated with magnetic reconnection processes

Radio bursts with fine structures in decimetric–centimetric wave range are generally believed to manifest the primary energy release process during flare/CME events. By spectropolarimeters in 1–2 GHz, 2.6–3.8 GHz, and 5.2–7.6 GHz at NAOC/Huairou with very high temporal (1.25–8 ms) and spectral (4–20 MHz) resolutions, the zebra patterns, spikes, and new types of radio fine structures with mixed frequency drift features are observed during several significant flare/CME events. In this paper we will discuss the occurrence of radio fine structures during the impulsive phase of flares and/or CME initiations, which may be connected to the magnetic reconnection processes.