Space Interferometry Mission spacecraft pointing error budgets

Preliminary error budgets for the pointing knowledge, control, and stability of the Space Interferometry Mission (SIM) spacecraft are constructed using the specifications of commercial off-the-shelf attitude determination sensors, attitude control actuators, and other spacecraft capabilities that have been demonstrated in past missions. Results obtained indicate that we can meet all the presently known spacecraft pointing requirements. A large number of derived requirements are generated from this study. Examples are specifications on attitude determination sensors, attitude control actuators, minimum settling time after a rest-to-rest spacecraft slew. Preliminary error budgets constructed in this study must be updated to reflect the changing spacecraft design and requirements     

New Horizons Mission Design

In the first mission to Pluto, the New Horizons spacecraft was launched on January 19, 2006, and flew by Jupiter on February 28, 2007, gaining a significant speed boost from Jupiter’s gravity assist. After a 9.5-year journey, the spacecraft will encounter Pluto on July 14, 2015, followed by an extended mission to the Kuiper Belt objects for the first time. The mission design for New Horizons went through more than five years of numerous revisions and updates, as various mission scenarios regarding routes to Pluto and launch opportunities were investigated in order to meet the New Horizons mission’s objectives, requirements, and goals. Great efforts have been made to optimize the mission design under various constraints in each of the key aspects, including launch window, interplanetary trajectory, Jupiter gravity-assist flyby, Pluto–Charon encounter with science measurement requirements, and extended mission to the Kuiper Belt and beyond. Favorable encounter geometry, flyby trajectory, and arrival time for the Pluto–Charon encounter were found in the baseline design to enable all of the desired science measurements for the mission. The New Horizons mission trajectory was designed as a ballistic flight from Earth to Pluto, and all energy and the associated orbit state required for arriving at Pluto at the desired time and encounter geometry were computed and specified in the launch targets. The spacecraft’s flight thus far has been extremely efficient, with the actual trajectory error correction ΔV being much less than the budgeted amount.     

THE CLUSTER MISSION: ESA'S SPACEFLEET TO THE MAGNETOSPHERE

During the first half of 1996, the European Space Agency (ESA) will launch a unique flotilla of spacecraft to study the interaction between the solar wind and the Earth's magnetosphere in unprecedented detail. The Cluster mission was first proposed to the Agency in late 1982 and was selected, together with SOHO, as the Solar Terrestrial Science Programme (STSP), the first cornerstone of ESA's Horizon 2000 Programme. It is a complex four-spacecraft mission designed to carry out three-dimensional measurements of the magnetosphere, covering both large- and small-scale phenomena in the sunward and tail regions. The mission is a first for ESA in a number of ways: – the first time that four identical spacecraft have been launched on a single launch vehicle, – the first time that ESA has built spacecraft in true series production and operated them as a single group, – the first time that European scientific institutes have produced a series of up to five instruments with full intercalibration, and – the first launch of the Agency's new heavy launch vehicle Ariane-5. The article gives an overview of this unique mission and the requirements that governed the spacecraft design. It then describes in detail the resulting design and how the particular engineering challenges posed by the series production of four identical spacecraft and sets of scientific instruments were met by the combined efforts of the ESA Project Team, Industry and the experiment teams.     

The IBEX Flight Segment

IBEX provides the observations needed for detailed modeling and in-depth understanding of the interstellar interaction (McComas et al. in Physics of the Outer Heliosphere, Third Annual IGPP Conference, pp. 162–181, 2004; Space Sci. Rev., 2009a, this issue). From mission design to launch and acquisition, this goal drove all flight system development. This paper describes the management, design, testing and integration of IBEX’s flight system, which successfully launched from Kwajalein Atoll on October 19, 2008. The payload is supported by a simple, Sun-pointing, spin-stabilized spacecraft with no deployables. The spacecraft bus consists of the following subsystems: attitude control, command and data handling, electrical power, hydrazine propulsion, RF, thermal, and structures. A novel 3-step orbit approach was employed to put IBEX in its highly elliptical, 8-day final orbit using a Solid Rocket Motor, which provided large delta-V after IBEX separated from the Pegasus launch vehicle; an adapter cone, which interfaced between the SRM and Pegasus; Motorized Lightbands, which performed separation from the Pegasus, ejection of the adapter cone, and separation of the spent SRM from the spacecraft; a ShockRing isolation system to lower expected launch loads; and the onboard Hydrazine Propulsion System. After orbit raising, IBEX transitioned from commissioning to nominal operations and science acquisition. At every phase of development, the Systems Engineering and Mission Assurance teams supervised the design, testing and integration of all IBEX flight elements.     

基于部件分解法的运载火箭RCS仿真计算方法

为估算运载火箭的RCS（Radar Cross Section,雷达散射截面积）,采用部件分解法对运载火箭进行电磁散射几何建模,根据飞行过程中运载火箭和雷达的几何关系建立雷达照射目标视线角的计算模型,并运用高频散射理论提出运载火箭RCS的仿真计算方法;最后,对运载火箭的静态RCS和动态RCS进行仿真计算与分析.结果表明：对运载火箭电磁散射几何建模合理可行,提出的火箭RCS计算方法可以满足工程应用需要.采用该方法仅修改几何建模中的模型结构和部分尺寸参数即可方便计算不同型号运载火箭的RCS特性,可以为航天测控雷达系统设计和布站优化提供依据.     

The New Horizons Spacecraft

The New Horizons spacecraft was launched on 19 January 2006. The spacecraft was designed to provide a platform for seven instruments designated by the science team to collect and return data from Pluto in 2015. The design meets the requirements established by the National Aeronautics and Space Administration (NASA) Announcement of Opportunity AO-OSS-01. The design drew on heritage from previous missions developed at The Johns Hopkins University Applied Physics Laboratory (APL) and other missions such as Ulysses. The trajectory design imposed constraints on mass and structural strength to meet the high launch acceleration consistent with meeting the AO requirement of returning data prior to the year 2020. The spacecraft subsystems were designed to meet tight resource allocations (mass and power) yet provide the necessary control and data handling finesse to support data collection and return when the one-way light time during the Pluto fly-by is 4.5 hours. Missions to the outer regions of the solar system (where the solar irradiance is 1/1000 of the level near the Earth) require a radioisotope thermoelectric generator (RTG) to supply electrical power. One RTG was available for use by New Horizons. To accommodate this constraint, the spacecraft electronics were designed to operate on approximately 200 W. The travel time to Pluto put additional demands on system reliability. Only after a flight time of approximately 10 years would the desired data be collected and returned to Earth. This represents the longest flight duration prior to the return of primary science data for any mission by NASA. The spacecraft system architecture provides sufficient redundancy to meet this requirement with a probability of mission success of greater than 0.85. The spacecraft is now on its way to Pluto, with an arrival date of 14 July 2015. Initial in-flight tests have verified that the spacecraft will meet the design requirements.     

新一代多用途载人飞船概念研究

在"神舟"载人飞船进入成熟稳定期后,中国有必要尽早启动新一代多用途载人飞船的论证和研制。本文对国外新一代载人飞船的技术方案特点、新的设计理念及发展现状进行了分析,从适应多任务、降低运营成本、钝头体气动外形、更高安全可靠性以及新型轻质材料使用等多个方面总结了国外新一代载人飞船的技术发展趋势。初步分析了中国发展新一代载人飞船的近地轨道、载人登月、载人登小行星、载人登火星等任务需求,基本确定了新一代飞船的总体性能参数,并在此基础上梳理了新一代载人飞船技术途径,初步提出了两种方案设想,为中国新一代载人飞船的研制提供参考。     

航天智能控制技术让运载火箭“会学习”

高可靠和智能化是未来智能航天器的主要特点,本文聚焦航天器高可靠、智能化的发展需求。梳理了中国运载火箭从无到有、从有到全的发展历程,提出了航天智能技术从航天器的可靠性做起,航天器的可靠性从航天智能控制做起,航天智能控制从"会学习"的火箭做起。围绕航天智能控制技术如何使运载火箭"会学习"的发展架构,进一步探索了"边飞边学"和"终身学习"智能控制技术的理论研究和应用现状,支撑中国"会学习"运载火箭高可靠和智能化的发展。     

The IMAGE Observatory

The Imager for Magnetopause-to-Aurora Global Exploration (IMAGE) mission will be the first of the new Medium-class Explorer (MIDEX) missions to fly. IMAGE will utilize a combination of ultraviolet and neutral atom imaging instruments plus an RF sounder to map and image the temporal and spatial features of the magnetosphere. The eight science sensors are mounted to a single deckplate. The deckplate is enveloped in an eight-sided spacecraft bus, 225 cm across the flats, developed by Lockheed Martin Missiles and Space Corporation. Constructed of laminated aluminum honeycomb panels, covered extensively by Gallium Arsenide solar cells, the spacecraft structure is designed to withstand the launch loads of a Delta 7326-9.5 ELV. Attitude control is via a single magnetic torque rod and passive nutation damper with aspect information provided by a star camera, sun sensor, and three-axis magnetometer. A single S-band transponder provides telemetry and command functionality. Interfaces between the self-contained payload and the spacecraft are limited to MIL-STD-1553 and power. This paper lists the requirements that drove the design of the IMAGE Observatory and the implementation that met the requirements.     

基于航天测控的实时仿真系统设计

航天器发射试验具有高风险性,而承担航天器测控的测控系统规模庞大、关系复杂,其测控设备、软件的正确性关系到试验成败。仿真技术的广泛应用,使设备、软件的正确性在发射任务前就可以得到充分验证,从而提高发射试验的安全性。以航天器试验任务为背景设计的实时仿真系统,在航天测量船上得到了成功应用,取得了良好的效果。     

载人登月人货分运与人货合运模式对比分析

由于载人航天任务所具有的确保航天员安全的特殊属性,载人登月任务模式往往因此必须考虑救生等多种环节和因素,变得十分复杂。针对目前载人登月人货分运及人货合运两种任务模式,通过比较分析表明,从安全性、任务风险、飞船设计约束、发射窗口、测控支持复杂度方面来看,人货合运模式要优于人货分运模式,但是人货合运模式中的重型火箭如果被要求按照载人火箭标准进行设计和考核,其研制周期、经费方面的投入将会增加。     

我国空间站运行的测控通信工作模式初探

在分析我国载人空间站在轨运行的任务特点和对测控通信提出的新要求的基础上,对测控通信工作模式进行了探讨。针对任务中心,采用分布式模式进行任务的组织和实施,建立常态化工作体系;针对测控通信资源的使用,对资源进行简化、优化,发挥天、地基各自优势,并实现天地基资源统一调度;针对在轨故障诊断和应急处置,提出了“天地联合,以地为主”的载人航天故障诊断模式和实现途径;针对空间站遥操作需求,提出了一套工作模式和实施流程;针对测控通信长期执行任务的可靠性,提出了任务中心容灾备份工作模式和通信路由的备份模式。以期为后续任务工作模式设计提供参考。     

Solar power system options for the Radiation and TechnologyDemonstration spacecraft

The Radiation and Technology Demonstration (RTD) Mission has the primary objective of demonstrating high-power (10 kilowatts) electric thruster technologies in Earth orbit. This paper discusses the conceptual design of the RTD spacecraft photovoltaic (PV) power system and mission performance analyses. These power system studies assessed multiple options for PV arrays, battery technologies and bus voltage levels. To quantify performance attributes of these power system options, a dedicated Fortran code was developed to predict power system performance and estimate system mass. The low-thrust mission trajectory was analyzed and important Earth orbital environments were modeled. Baseline power system design options are recommended on the basis of performance, mass and risk/complexity. Important findings from parametric studies are discussed and the resulting impacts to the spacecraft design and cost     

MESSENGER Mission Design and Navigation

Nearly three decades after the Mariner 10 spacecraft’s third and final targeted Mercury flyby, the 3 August 2004 launch of the MESSENGER (MErcury Surface, Space ENvironment, GEochemistry, and Ranging) spacecraft began a new phase of exploration of the closest planet to our Sun. In order to ensure that the spacecraft had sufficient time for pre-launch testing, the NASA Discovery Program mission to orbit Mercury experienced launch delays that required utilization of the most complex of three possible mission profiles in 2004. During the 7.6-year mission, the spacecraft’s trajectory will include six planetary flybys (including three of Mercury between January 2008 and September 2009), dozens of trajectory-correction maneuvers (TCMs), and a year in orbit around Mercury. Members of the mission design and navigation teams optimize the spacecraft’s trajectory, specify TCM requirements, and predict and reconstruct the spacecraft’s orbit. These primary mission design and navigation responsibilities are closely coordinated with spacecraft design limitations, operational constraints, availability of ground-based tracking stations, and science objectives. A few days after the spacecraft enters Mercury orbit in mid-March 2011, the orbit will have an 80° inclination relative to Mercury’s equator, a 200-km minimum altitude over 60°N latitude, and a 12-hour period. In order to accommodate science goals that require long durations during Mercury orbit without trajectory adjustments, pairs of orbit-correction maneuvers are scheduled every 88 days (once per Mercury year).     

Solar Wind Electron Proton Alpha Monitor (SWEPAM) for the Advanced Composition Explorer

The Solar Wind Electron Proton Alpha Monitor (SWEPAM) experiment provides the bulk solar wind observations for the Advanced Composition Explorer (ACE). These observations provide the context for elemental and isotopic composition measurements made on ACE as well as allowing the direct examination of numerous solar wind phenomena such as coronal mass ejections, interplanetary shocks, and solar wind fine structure, with advanced, 3-D plasma instrumentation. They also provide an ideal data set for both heliospheric and magnetospheric multi-spacecraft studies where they can be used in conjunction with other, simultaneous observations from spacecraft such as Ulysses. The SWEPAM observations are made simultaneously with independent electron and ion instruments. In order to save costs for the ACE project, we recycled the flight spares from the joint NASA/ESA Ulysses mission. Both instruments have undergone selective refurbishment as well as modernization and modifications required to meet the ACE mission and spacecraft accommodation requirements. Both incorporate electrostatic analyzers whose fan-shaped fields of view sweep out all pertinent look directions as the spacecraft spins. Enhancements in the SWEPAM instruments from their original forms as Ulysses spare instruments include (1) a factor of 16 increase in the accumulation interval (and hence sensitivity) for high energy, halo electrons; (2) halving of the effective ion-detecting CEM spacing from ∼5° on Ulysses to ∼2.5° for ACE; and (3) the inclusion of a 20° conical swath of enhanced sensitivity coverage in order to measure suprathermal ions outside of the solar wind beam. New control electronics and programming provide for 64-s resolution of the full electron and ion distribution functions and cull out a subset of these observations for continuous real-time telemetry for space weather purposes. This revised version was published online in June 2006 with corrections to the Cover Date.     

Gravity Recovery and Interior Laboratory (GRAIL): Mapping the Lunar Interior from Crust to Core

The Gravity Recovery and Interior Laboratory (GRAIL) is a spacecraft-to-spacecraft tracking mission that was developed to map the structure of the lunar interior by producing a detailed map of the gravity field. The resulting model of the interior will be used to address outstanding questions regarding the Moon’s thermal evolution, and will be applicable more generally to the evolution of all terrestrial planets. Each GRAIL orbiter contains a Lunar Gravity Ranging System instrument that conducts dual-one-way ranging measurements to measure precisely the relative motion between them, which in turn are used to develop the lunar gravity field map. Each orbiter also carries an Education/Public Outreach payload, Moon Knowledge Acquired by Middle-School Students (MoonKAM), in which middle school students target images of the Moon for subsequent classroom analysis. Subsequent to a successful launch on September 10, 2011, the twin GRAIL orbiters embarked on independent trajectories on a 3.5-month-long cruise to the Moon via the EL-1 Lagrange point. The spacecraft were inserted into polar orbits on December 31, 2011 and January 1, 2012. After a succession of 19 maneuvers the two orbiters settled into precision formation to begin science operations in March 1, 2012 with an average altitude of 55 km. The Primary Mission, which consisted of three 27.3-day mapping cycles, was successfully completed in June 2012. The extended mission will permit a second three-month mapping phase at an average altitude of 23 km. This paper provides an overview of the mission: science objectives and measurements, spacecraft and instruments, mission development and design, and data flow and data products.     

Lunar Reconnaissance Orbiter (LRO): Observations for Lunar Exploration and Science

The Lunar Reconnaissance Orbiter (LRO) was implemented to facilitate scientific and engineering-driven mapping of the lunar surface at new spatial scales and with new remote sensing methods, identify safe landing sites, search for in situ resources, and measure the space radiation environment. After its successful launch on June 18, 2009, the LRO spacecraft and instruments were activated and calibrated in an eccentric polar lunar orbit until September 15, when LRO was moved to a circular polar orbit with a mean altitude of 50 km. LRO will operate for at least one year to support the goals of NASA’s Exploration Systems Mission Directorate (ESMD), and for at least two years of extended operations for additional lunar science measurements supported by NASA’s Science Mission Directorate (SMD). LRO carries six instruments with associated science and exploration investigations, and a telecommunications/radar technology demonstration. The LRO instruments are: Cosmic Ray Telescope for the Effects of Radiation (CRaTER), Diviner Lunar Radiometer Experiment (DLRE), Lyman-Alpha Mapping Project (LAMP), Lunar Exploration Neutron Detector (LEND), Lunar Orbiter Laser Altimeter (LOLA), and Lunar Reconnaissance Orbiter Camera (LROC). The technology demonstration is a compact, dual-frequency, hybrid polarity synthetic aperture radar instrument (Mini-RF). LRO observations also support the Lunar Crater Observation and Sensing Satellite (LCROSS), the lunar impact mission that was co-manifested with LRO on the Atlas V (401) launch vehicle. This paper describes the LRO objectives and measurements that support exploration of the Moon and that address the science objectives outlined by the National Academy of Science’s report on the Scientific Context for Exploration of the Moon (SCEM). We also describe data accessibility by the science and exploration community.     

THE CLUSTER DATA PROCESSING SYSTEM: A DISTRIBUTED SYSTEM IN SUPPORT OF A CHALLENGING SCIENTIFIC MISSION

The Cluster mission is aimed at the study of small-scale structures that are believed to be fundamental in determining the behaviour of key interactive processes of cosmic plasma. The mission will be controlled from the European Space Operations Centre (ESOC). ESOC is also in charge of the commanding of the scientific payloads on-board the four Cluster spacecraft after negotiation with the Cluster Principal Investigators (PIs) and of collecting and distributing the mission's scientific results to the Cluster community. This paper describes the process of translating the scientific requirements of the Cluster mission into a data-processing system supporting the mission via the definition of an appropriate operational scenario. In particular, the process of negotiation between the PIs and ESOC to command the spacecraft is mediated by the Joint Science Operations Centre (JSOC) and finalised by the Cluster Mission Planning System (CMPS) while the return of the data to the Cluster community is actuated by the Cluster Data Disposition System (CDDS). The Cluster Mission Control System (CMCS) provides the interface between these two systems and the spacecraft. These elements constitute the Cluster Data-Processing System (CDPS).     

Future trends in space photovoltaics

The Air Force, NASA, NRL and the commercial sector are all using small spacecraft to a greater extent in order to provide more cost-effective access to space. This paper discusses the generic photovoltaic technologies which are being studied and/or developed to support these smaller spacecraft, and identifies several specific examples. The unique requirements of these mission types include lower power arrays, arrays with lower mass and stowed volume which will be more compatible with small launch vehicles, and power systems with lower fabrication costs     

Deep Impact Mission Design

The Deep Impact mission is designed to provide the first opportunity to probe below the surface of a comet nucleus by a high-speed impact. This requires finding a suitable comet with launch and encounter conditions that allow a meaningful scientific experiment. The overall design requires the consideration of many factors ranging from environmental characteristics of the comet (nucleus size, dust levels, etc.), to launch dates fitting within the NASA Discovery program opportunities, to launch vehicle capability for a large impactor, to the observational conditions for the two approaching spacecraft and for telescopes on Earth.