共查询到20条相似文献,搜索用时 62 毫秒
1.
2.
3.
4.
5.
对未知着降区平坦度测量是无人机在复杂地形下安全着陆的关键问题。首先,根据小孔成像原理推导出基于单目序列图像的未知区域深度计算方程;其次,针对稀疏匹配存在深度信息重构误差大而稠密匹配在平滑区域误匹配率高的问题,提出一种基于Delaunay三角剖分的稠密点特征生成算法;然后,分别对序列图像中的2帧图像提取亚像素级Harris角点和尺度不变特征变换(SIFT)特征点,并分别进行特征点匹配;再以2种特征点间的欧氏距离作为约束条件将2种特征点进行融合,生成准稠密特征点;最后,将准稠密特征点进行Delaunay三角剖分,并根据每个剖分三角形上3个顶点像素偏差的方差值制定稠密特征点的生成策略,并结合所提出的深度计算方程计算整个未知区域各点的深度信息。通过Vega Prime(VP)搭建仿真演示验证系统,实验结果表明在机载相机距地面400m处计算高度分别为90m和55m的物体深度信息时,其深度测量相对误差不超过0.89%,具有较高的精度。 相似文献
6.
激光焊接在航空领域具有广泛的应用场景,基于视觉的激光焊接缺陷识别对于产品质量的提高至关重要。针对当前基于深度学习的激光焊接缺陷识别方法存在可解释性差的问题,提出了一种融合多尺度特征的类激活映射(MSF-CAM)方法。在训练阶段,以VGG16为骨架模型并将监督信息施加于多个尺度以促进模型对多尺度特征的学习。在测试阶段,对输出类别在多个尺度上的激活图进行叠加,并以此作为模型的判断依据。多尺度特征的融入不但增强了模型的可解释性,而且还提高了激光焊接缺陷识别的准确性。试验结果表明:MSF-CAM在测试集上的准确率为98.12%,识别单幅图像耗时8.28 ms。此外,MSF-CAM可以从边缘、轮廓这种初级特征的角度对模型的决策依据提供人类更容易理解的解释。 相似文献
7.
张琳钦 《西安航空技术高等专科学校学报》2023,(3):83-88
为了提高手势识别在人机交互媒体播放界面交流的准确率,提出一种基于支持向量机的人机交互媒体播放界面手势识别方法。首先通过分析人机交互媒体播放界面,利用Cam Shift方法跟踪用户手势,确定手势在人机交互媒体播放界面的区域,通过计算波峰数量、手势的长度和能量,提取出手势特征;然后通过扫描用户手势的深度图像,得到手势范围,引入高斯滤波函数,过滤掉手势图像的掩模,确定手心位置,完成手势分割;最后利用支持向量机的分类阈值,计算手势图像的分类面,引入拉格朗日算法,将最优分类面问题转化为对偶性问题,实现人机交互媒体播放界面的手势识别。实验结果表明,该方法能够清晰识别人机交互媒体播放界面中的手势,并将准确率提高到90%以上。研究结果为复杂工作环境中运用手势动作进行人机互动提供理论支持。 相似文献
8.
模态参数识别的特征系统实现算法:研究与比较 总被引:6,自引:0,他引:6
以 GARTEUR飞机模型的飞行颤振和地面共振试验为例,对模态参数识别的特征系统实现算法的4种变形特征系统实现算法(ERA)、快速ERA(FERA)、相关ERA(ERA/ DC)和快速相关ERA(FERA/ DC),进行了深入的理论分析和仿真研究。结果表明:与ERA相比,ERA/ DC的阻尼识别精度在10%和30%噪声下可以提高6~60倍;FERA的识别速度可以比ERA提高4~1 0倍,且精度较高;而FERA/ DC的识别速度可以比ERA/ DC提高 3~5倍,并且精度不会降低。 相似文献
9.
10.
11.
有翼高超声速再入飞行器气动设计难点问题 总被引:3,自引:1,他引:2
有翼高超声速再入飞行器是近年来的研究热点,气动设计是飞行器设计的关键。为了更清楚地认识有翼高超声速再入飞行器气动设计的难点问题,对有翼高超声速再入飞行器的发展、优势及总体任务剖面进行了介绍,从5个方面详细介绍了该类飞行器气动设计的难点问题,包括多约束复杂面对称气动布局设计、高温真实气体效应对气动特性影响、天地差异与天地换算方法、反作用控制系统(RCS)喷流干扰对气动特性的影响以及气动数据不确定度等,简要阐明了这些难点问题对总体设计的重要性以及初步的解决思路,为有翼高超声速再入飞行器气动设计提供了一些参考。 相似文献
12.
13.
基于飞机油箱模型形状特征油量测量切片步长选择方法研究 总被引:1,自引:0,他引:1
在分析飞机数字式油量测量过程中目前广泛使用的切片法油量测量原理的基础上,针对现有的定步长切片法无法得到准确、可靠的燃油质量特性数据库的缺陷,结合对飞机油箱模型形状特征的分析,提出了基于飞机油箱模型形状特征的油量测量切片步长选择方法。此方法包括切片步长整体和局部选择两个过程,整体选择以实现相邻两切片平面所夹油箱模型体积近似相等为目的来确定切片步长,以体现油箱模型截面整体变化规律;局部选择以设计切片平面与截面突变平面重合或尽可能接近的方式,突出油箱截面的局部变化特征。实验结果表明:该切片步长选择方法较定步长方法能够建立更为合理、可靠的燃油质量特性数据库,从而提高了油量测量精度。 相似文献
14.
NING Guo-dong ZHANG Shu-guang FANG Zhen-ping 《中国航空学报》2007,20(1):1-8
A method for the implementation of integrated three-degree-of-freedom constrained entry guidance for reusable launch vehicle is presented. Given any feasible entry conditions, terminal area energy management interface conditions, and the reference trajectory generated onboard then, the method can generate a longitudinal guidance profile rapidly, featuring linear quadratic regular method and a proportional-integral-derivative tracking law with time-varying gains, which satisfies all the entry corridor constraints and meets the requirements with high precision. Afterwards, by utilizing special features of crossrange parameter, establishing bank-reversal corridor, and determining bank-reversals according to dynamically adjusted method, the algorithm enables the lateral entry guidance system to fly a wide range of missions and provides reliable and good performance in the presence of significant aerodynamic modeling uncertainty. Fast trajectory guidance profiles and simulations with a reusable launch vehicle model for various missions and aerodynamic uncertain-ties are presented to demonstrate the capacity and reliability of this method. 相似文献
15.
LUO Cheng LIU Hua YANG Jia-ling LIU Kai-xin 《中国航空学报》2007,20(3):230-235
Crashworthiness requirement of fuel tanks is one of the important requirements in helicopter designs. The relations among the protection frame, textile layer and rubber layer of the fuel tank are introduced. Two appropriate FE models are established, one is for an uncovered helicopter fuel tank without protection frame, and the other is for fuel tank with protection frame. The dynamic responses of the two types of fuel tanks impinging on the ground with velocities of 17.3 m/s are numerically simulated for the purpose of analyzing energy-absorbing capabilities of the textile layer and protection frame. The feasibility of the current crashworthiness design of the fuel tank is examined though comparing the dynamic response behaviors of the two fuel tanks. 相似文献
16.
17.
波音公司面临着来自空客公司的巨大挑战,企业战略性创新才是公司成功的关键。为此波音公司的全部战略性研究集中在扩大产品的差异性上,体现在3个方面:电子化(e-Enabled)运营环境、整体复合材料机身部件的制造技术和支持波音787客机的全球协同环境(GCE)。 相似文献
18.
The effect of inlet conditions on the flow and heat transfer in multiple rotating cavity with axial throughflow 总被引:1,自引:0,他引:1
This paper discusses experimental results from two different build configurations of a heated multiple rotating cavity test rig.Measurements of heat transfer from the discs and tangential velocities are presented.The test rig is a 70% full scale version of a high pressure compressor stack of an axial gas turbine engine.Of particular interest are the internal cylindrical cavities formed by adjacent discs and the interaction of these with a central axial throughflow of cooling air.Tests were carried out for a range of non-dimensional parameters representative of high pressure compressor internal air system flows(Re up to 5×106 and Rez up to 2×105).Two different builds have been tested.The most significant difference between these two build configurations is the size of the annular gap between the(non-rotating) drive shaft and the bores of the discs.The heat transfer data were obtained from thermocouple measurements of surface temperature and a conduction solution method.The velocity measurements were made using a two component,LDA system.The heat transfer results from the discs show differences between the two builds.This is attributed to the wider annular gap allowing more of the throughflow to penetrate into the cavity.There are also significant differences between the radial distributions of tangential velocity in the two builds of the test rig.For the narrow annular gap,there is an increase of non-dimensional tangential velocity V/Ωr with radial location to solid body rotation V/Ωr=1.For the wider annular gap,the non-dimensional velocities show a decrease with radial location to solid body rotation. 相似文献
19.
Abnormal Shape Mould Winding 总被引:1,自引:0,他引:1
Fu Hongya Wang Xianfeng Han Zhenyu Fu Yunzhong 《中国航空学报》2007,20(6):552-558
为解决网格化芯模的缠绕问题,本文提出了复合材料面片缠绕机理;接着详细分析了面片缠绕过程中的芯模凹曲面上纤维滑线和架空现象,应用微分几何曲面理论和空间几何理论,提出判据及其解决方案;最后,针对飞机发动机进气道的缠绕成型,编制缠绕控制程序并进行相应的实验,验证了面片缠绕方法的可行性。 相似文献
20.
基于弯曲激波压缩系统的高超声速进气道反设计研究进展 总被引:3,自引:0,他引:3
总结了近十年来弯曲激波压缩研究的主要成果。提出了弯曲激波压缩系统的新概念,即利用特殊设计的楔形弯曲压缩面或空间弯曲压缩面,产生一系列与前缘弱激波相互交汇或叠加的压缩波系,从而使前缘激波弯曲,形成特殊的弯曲激波,它与波后的等熵压缩波来共同完成对气流的压缩。在此基础上,实现了由给定出口气动参数的超声速内流道反设计,实现了由给定压缩面压力分布和给定压缩面马赫数分布要求的型面反设计,实现了由给定激波波面的压缩型面反设计。研究证明,弯曲压缩面-弯曲激波压缩系统具有良好的综合气动性能,为高性能高超声速进气系统的气动设计提供了一种全新的设计方法。 相似文献