共查询到20条相似文献,搜索用时 62 毫秒
1.
文章根据税控收款机国家标准的要求和目前国内一般税控收款机掉电保护功能不尽完善的现状,提出了一种先进的税控收款机掉电保护功能的硬件及软件实现方案,其中软件实现技术有相当的创新性,大大提高了掉电保护的成功率,深受国内用户喜爱。 相似文献
2.
文章从电子产品可靠性的预测与分配、可靠性设计新技术的应用等方面阐述了提高税控收款机产品可靠性的多种有效途径。提高税控收款机产品可靠性在确保国家税收的安全、提高国家税收征管工作效率和进一步促进我国的“金税工程”建设等方面有重大而深远的意义。 相似文献
3.
4.
5.
任鑫 《北华航天工业学院学报》2020,30(2):11-12,49
本文提出基于OpenCV的车辆牌照识别的方法,通过灰度处理、高斯模糊、Soble滤波、自适应二值化、形态学操作、轮廓提取,判断轮廓灯一系列步骤,最终能够将牌照的轮廓明确显示出来。 相似文献
6.
质量工作是政府、企业、员工、消费者和整个社会共同关注的问题,同样需要共同的努力来推进。因此,必须用系统的、发展的观点,建立质量工作的体系结构,科学合理地策划、实施和改进质量工作,解决长期以来客观存在的脱节和不落实问题,以适应市场国际化需要和人们对质量保证、产品质量日益增长的迫切要求。 相似文献
7.
8.
中国空间技术研究院的标准化卫星平台 总被引:4,自引:2,他引:4
首先阐述卫星标准化的三种形式——通用化、系列化和组合化的基本概念和卫星平台实现标准化的必要性;其次介绍了国外公用平台的现状,提出建立卫星公用平台的基本原则;最后给出8种公用平台的自重、平台尺寸、可支承的有效载荷重量、总功率、有效栽荷可用功率、姿态控制精度、测控能力、推进剂携带量、设计工作寿命、与运载火箭的兼容性等主要性能参数及应用前景。 相似文献
9.
论文介绍了在快速以太网上使用Helix实现教育视频点播的实例,其特点是共享信息资源、信息传播面广、用户接收信息灵活便捷、费用较低、实现方法简单,系统稳定性好。 相似文献
10.
文章介绍了一种基于word—VBA的程序代码来创建、修改和调用word模板的功能函数、宏命令及自动图文集的方法,以实现试卷添加、调用和修改,从而完成各学科试卷的电子化管理,并将大量辅助工具界面化,大大提高出卷效率。 相似文献
11.
介绍了一种新的刚体转动的四元数模型。这些模型可以提高再定向控制的对边界条件的适应能力,在此基础上还介绍了这些模型的一些实际应用。 相似文献
12.
A. A. Davydov 《Cosmic Research》2011,49(4):335-344
A communication satellite (small spacecraft) injected into a geosynchronous orbit is considered. Flywheel engines are used
to control the rotational spacecraft motion. The spacecraft after the emergency situation has passed into a state of uncontrolled
rotation. In this case, no direct telemetric information about parameters of its rotational motion was accessible. As a result,
the problem arose to determine the rotational satellite motion according to the available indirect information: current taken
from the solar panels. Telemetric measurements of solar panel current obtained on the time interval of a few hours were simultaneously
processed by the least squares method integrating the equations of rotational satellite motion. We present the results of
processing 10 intervals of the measurement data allowing one to determine the real rotational spacecraft motion and to estimate
the total angular momentum of flywheel engines. 相似文献
13.
The problem of optimal control over many-revolution spacecraft orbit transfers between circular coplanar orbits of satellites is considered. The spacecraft flight is controlled by a thrust vector of a jet engine with restricted thrust (JERT). The mass expenditure is minimized at a limited time of flight. The optimal control problem is solved based on the maximum principle. The boundary value problem of the maximum principle is solved numerically using the shooting method. A modified computation scheme of the shooting method is suggested (multi-point shooting), as well as a method (correlated with the scheme) of choosing the initial approximation with the use of a solution to the optimization problem in the impulse formulation. The scheme and method allow one to construct many-revolution spacecraft orbit transfers. 相似文献
14.
热变形对天线指向机构的指向精度具有重要影响,但利用传统的设计方法很难实现对指向精度的准确计算,尤其是热变形对指向精度影响的研究工作更是少见。为此建立了机构的三维实体热-结构耦合有限元分析模型,根据有限元分析结果并结合机构的运动链关系,构建了各关键运动副运动误差的计算方法;在此基础上实现了机构指向误差的计算,研究了运动副名义、最大以及最小配合间隙条件下,温度载荷对各关键运动副运动误差和指向精度的影响。研究结果表明,温度载荷对关键运动副的运动误差以及机构的指向精度具有重要影响,随着温度载荷偏离常温数值的增加,指向误差不断增大,名义配合间隙条件下的指向误差最大。 相似文献
15.
16.
17.
18.
金属网由于柔韧性好、使用方便等优势而在电缆屏蔽工程上得到广泛应用。本文对电缆用的金属网屏蔽效能进行工程计算,通过计算,对金属网不同材料、不同规格、单层与双层屏蔽及有缝隙情况下的屏蔽效能进行比较与分析,对工程应用有一定的指导意义。 相似文献
19.
为满足航天器微振动环境模拟的需要,开展了多自由度微振动时域波形复现控制方法研究。首先,介绍了基于时域波形复现的多自由度微振动环境模拟控制理论方法。其次,针对六自由度微振动激励系统,应用MATLAB软件建立了基于实测传递函数矩阵的多输入多输出微振动激励仿真系统,针对微振动时域波形复现闭环控制过程进行了算法编程,并给出了仿真的闭环控制流程图。最后,通过算例对多自由度微振动时域波形复现进行了数值仿真,以给定的白噪声为输入,模拟对实际存在的系统非线性、测量误差等影响因素的控制效果。仿真结果验证了多自由度微振动时域波形复现控制方法的可行性及有效性,所得结论可以为研究多自由度微振动时域波形复现控制系统提供参考。 相似文献
20.
The problem of determining an estimation of current spacecraft motion parameters on the stage of its descent is solved on the basis of readings of an optoelectronic navigation system and additional information from the self-contained inertial navigation system at the most general assumptions on the nature of motion of the object and the statistical properties of the noise of the measuring devices. 相似文献