The VESTA project: Combined studies of Mars and small bodies of the solar system

A mission to Mars and small solar system bodies is presently studied as a possible collaboration between INTERCOSMOS, CNES, ESA and eventually other participants. The VESTA concept, based on the same strategy as the successful VEGA mission, is more ambitious, as two spacecrafts separate soon after launch: a soviet spacecraft, dedicated to the study of Mars, and a spacecraft dedicated to the study of small bodies, under the responsibility of CNES and ESA. This spacecraft would use Mars gravity assists to visit up to 4 small bodies in less than 5 years. The mission is duplicated, which means that up to 8 small bodies could be studied (e.g. 6 main belt asteroids, 1 apollo-amor asteroid and 1 short period comet). Low relative velocities (< 3.5 km/s) should allow to drop a penetrator on two large main belt asteroids, such as 4 Vesta and 1 Ceres (1994 launch).     

Testing Modified Newtonian Dynamics with LISA Pathfinder

We suggest that LISA Pathfinder, a technology demonstrator for the future gravitational wave observatory LISA, could be used to carry out a direct experimental test of Modified Newtonian Dynamics (MOND). The LISA Pathfinder spacecraft is currently being built and the launch date is just a few years away. No modifications of the spacecraft are required, nor any interference with its nominal mission. The basic concept is to fly LISA Pathfinder through the region around the Sun-Earth saddle point, in an extended mission phase, once the original mission goals are achieved. We examine various strategies to reach the saddle point, and find that the preferred strategy, yielding relatively short transfer times of just over 1 year, probably involves a lunar fly-by. LISA Pathfinder will be able to probe the intermediate MOND regime, i.e. the transition between deep MOND and Newtonian gravity. We present robust estimates of the anomalous gravity gradients that LISA Pathfinder should be exposed to, based on MONDian effects as derived from the Tensor-Vector-Scalar (TeVeS) theory. The spacecraft speed and spatial scale of the MOND signal combine in a way that the spectral signature of the signal falls precisely into LISA Pathfinder’s measurement bandwidth. We find that if the gravity gradiometer on-board the spacecraft achieves its currently predicted sensitivity, these anomalous gradients could not just be detected, but measured in some detail.     

Contingency target assessment,trajectory design,and analysis for NASA’s NEA scout solar sail mission

The presented study examines contingency target selection and trajectory design for NASA’s Near-Earth Asteroid Scout mission under the assumption of a missed lunar gravity assist. Two previously considered asteroids are selected as potential targets for the given scenario based on favorable orbital characteristics for launch dates ranging from June 27, 2020 through July 26, 2020. Initially, a simplified circular restricted 3-body problem + ideal solar sail model is utilized to survey trajectory options for a month-long launch window. Selected solutions from this data set are then converged in an N-body ephemeris + non-ideal sail model. Results suggest that NEA Scout can still perform asteroid rendezvous mission under the missed lunar gravity assist scenario with new targets, 2019 GF1, 2018 PK21, and 2007 UN12, based on the target launch dates. Further target assessment is carried out for 165 days beyond the current June 27, 2020 launch date.     

An overview of RADOM results for earth and moon radiation environment on Chandrayaan-1 satellite

The RADiatiOn Monitor (RADOM) is a miniature dosimeter-spectrometer that flew onboard the Chandrayaan-1 lunar mission in order to monitor the local radiation environment. Primary objective of the RADOM experiment was to measure the total absorbed dose, flux of surrounding energetic particles and spectrum of the deposited energy from high energy particles both en-route and in lunar orbit. RADOM was the first experiment to be switched on after the launch of Chandrayaan-1 and was operational until the end of the mission. This paper summarizes the observations carried out by RADOM during the entire life time (22 October 2008–31 August 2009) of the Chandrayaan-1 mission and compares the measurement by RADOM with the radiation belt models such as AP-8, AE-8 and CRRESS.     

KuaFu Mission

The KuaFu mission-Space Storms, Aurora and Space Weather Explorer-is an "L1+Polar" triple satellite project composed of three spacecraft: KuaFu-A will be located at L1 and have instruments to observe solar EUV and FUV emissions, and white-light Coronal Mass Ejections (CMEs), and to measure radio waves, the local plasma and magnetic field,and high-energy particles. KuaFuB1 and KuaFu- B2 will bein polar orbits chosen to facilitate continuous 24 hours a day observation of the north polar Aurora Oval. The KuaFu mission is designed to observe the complete chain of disturbances from the solar atmosphere to geospace, including solar flares, CMEs, interplanetary clouds, shock waves, and their geo-effects, such as magnetospheric sub-storms and magnetic storms, and auroral activities. The mission may start at the next solar maximum (launch in about 2012), and with an initial mission lifetime of two to three years. KuaFu data will be used for the scientific study of space weather phenomena, and will be used for space weather monitoring and forecast purposes. The overall mission design, instrument complement, and incorporation of recent technologies will target new fundamental science, advance our understanding of the physical processes underlying space weather, and raise the standard of end-to-end monitoring of the Sun-Earth system.     

从日地系统L2出发借力月球飞越近地小行星

对于停留在日地系统L2的“嫦娥2号”探测器,其后续飞行方案有多个选项,例如主动撞月或重返月球轨道、返回地球轨道或再入大气、飞往地月系统L1/L2或日地系统L1、进入深空飞越近地小行星(最终,“嫦娥2号”于2012年12月13日成功地实现了对Toutatis小行星的近距离飞越)。探讨上述的飞行方案需要对飞行轨道进行初步设计,总的速度脉冲限制在100 m/s以内并且需要考虑探测器同时受到太阳、地球、月球的引力作用。本研究设计了探测器从日地系统L2出发借力月球实现Toutatis小行星飞越的飞行方案,与直接飞越方案相比,借力月球可以进一步节省探测器的燃料消耗,其等效速度脉冲设计值为58.47 m/s。     

“嫦娥4号”中继星任务分析与系统设计

作为"嫦娥4号"任务的重要组成部分,中继星将为着陆器和巡视器提供中继通信支持。不同于其它月球探测器,中继星首次选择了绕地月L2平动点运行的晕(Halo)轨道以保证对月球背面的着陆器和巡视器提供连续的中继通信服务,面临诸多技术挑战。在对中继星任务特点进行分析的基础上,梳理了研制中的技术难题,包括使命轨道的选择、使命轨道的到达和长期维持、中继通信体制选择等,并提出了解决方案。中继星的总体设计方案概述也在文中给出。     

Proposal of application of same beam VLBI measurements in precision orbit determination of lunar orbiter and return capsule and lunar gravity field simulation in Chang’E-3 mission

High accuracy differenced phase delay can be obtained by observing multiple point frequencies of two spacecraft using the same beam Very Long Baseline Interferometry (VLBI) technology. Its contribution in lunar spacecraft precision orbit determination has been performed during the Japanese lunar exploration mission SELENE. In consideration that there will be an orbiter and a return capsule flying around the moon during the Chinese lunar exploration future mission Chang’E-3, the contributions of the same beam VLBI in spacecraft precision orbit determination and lunar gravity field solution have been investigated. Our results show that the accuracy of precision orbit determination can be improved more than one order of magnitude after including the same beam VLBI measurements. There are significant improvements in accuracy of low and medium degree coefficients of lunar gravity field model obtained from combination of two way range and Doppler and the same beam VLBI measurements than the one that only uses two way range and Doppler data, and the accuracy of precision orbit determination can reach meter level.     

The present status of the Japanese Penetrator Mission: LUNAR-A

The scientific objective of the LUNAR-A Japanese Penetrator Mission is to explore the lunar interior by seismic and heat-flow experiments. Two penetrators containing two-component seismometer and heat-flow probes will be deployed from a spacecraft onto the lunar surface, one on the nearside and the other on the farside of the moon. The data obtained by the penetrators will be transmitted to the ground station by way of the LUNAR-A mother spacecraft orbiting at an altitude of about 200 km. The seismic observations are expected to provide key data on the size of the lunar core, as well as data on the deep mantle structure. The heat-flow measurements at two different sites will also provide important data on the thermal structure and bulk concentrations of heat-generating elements in the Moon. These data will provide much stronger geophysical constraints on the origin and evolution of the Moon than has ever been obtained. The LUNAR-A mission was supposed to be launched in 2004. However, a malfunction of spacecraft subsystem and technical issues for penetrator system occurred during the course of the qualification level test. Therefore, further improvements and some modifications were considered to be required for reliability and robustness. The development of the mother spacecraft was temporarily suspended, while we have put a three-year program into effect to solve the penetrator technology issues.     

木星系探测及行星穿越任务轨迹初步设计

基于我国未来木星系探测任务需求,初步设计了任务轨迹。以目前的发射能力,要实现木星的环绕探测必将利用行星借力,需设计借力轨迹。首先将脉冲变轨的轨迹设计问题转化为参数优化问题,在满足2029—2032年间发射并且飞行时间不超过7年的约束条件下,使用PSO算法对发射时刻、借力时刻、深空机动时刻、到达时刻等参数进行优化,使得探测器需提供的总速度增量最小。探测器进入木星系后,利用木卫3借力捕获至环木大椭圆轨道,又利用木卫4构造共振借力,最终捕获至木卫4的环绕轨道。在此基础上,还考虑了天王星飞越的拓展任务,天王星探测器在到达木星时与木星系探测器分离,利用木星借力可无消耗飞往天王星,并在2043年完成天王星的飞越探测任务。     

一种探月任务多窗口发射轨道设计方法

针对探月任务多窗口发射需求和目标轨道受到明显月球引力摄动的特点,提出一种快速高效的发射轨道设计方法：在星箭分离前的发射段,各发射窗口对应的发射轨道的一、二级飞行段完全相同,仅调整三级工作段程序角和无动力滑行时间,以满足入轨要求;在末级排放段,微调末级速度方向,利用月球摄动抬高末级近地点高度,使之超过GEO受保护区。该方法可统一火箭一、二级飞行段状态,缩小子级残骸落区范围,增强入轨参数设计的灵活性,显著提高星箭入轨参数迭代和相关分析工作的效率,明显改善末级离轨效果,符合空间安全相关要求,可推广应用于其他深空探测任务的多窗口发射轨道设计。     

嫦娥五号探测器GNC系统设计

为实现我国首次月球样品无人采样返回任务,设计了嫦娥五号(Chang’E 5)探测器制导、导航与控制(GNC)系统.根据任务要求和探测器特点,GNC系统设计分为轨道器GNC子系统、返回器GNC子系统和着上组合体GNC子系统.给出了嫦娥五号探测器GNC系统的架构设计、工作模式以及在轨飞行结果.结果表明,GNC系统设计正确,成功完成了动力下降、起飞上升、交会对接、返回再入等关键动作,实现了月球表面起飞上升、月球轨道交会对接以及携带月壤以近第二宇宙速度二次再入返回的三项首次任务,各项功能性能满足任务要求.     

Progress in China's Lunar Exploration Program

Chang'E-1 and Chang'E-2 of China's Lunar Exploration Program (CLEP) have successfully achieved their mission. At the present time, only Chang'E-3 is still in operation, which was successfully launched on December 2, 2013. Chang'E-3 probe is the third robotic lunar mission of CLEP, which consists of a lander and a rover, with eight payloads on board the spacecraft. Up to December 21, 2015, more than 2.86TB raw data were received from these instruments onboard Chang'E-3 probe. A series of research results have been achieved. This paper gives a detailed introduction to the new scientific results obtained from Chang'E-3 missions.      

Space VLBI: from first ideas to operational missions

The operational period of the first generation of dedicated Space VLBI (SVLBI) missions commenced in 1997 with the launch of the Japan-led mission VSOP/HALCA and is coming to closure in 2019 with the completion of in-flight operations of the Russia-led mission RadioAstron. They were preceded by the SVLBI demonstration experiment with the Tracking and Data Relay Satellite System (TDRSS) in 1986–1988. While the comprehensive lessons learned from the first demonstration experiment and two dedicated SVLBI missions are still awaiting thorough attention, several preliminary conclusions can be made. This paper addresses some issues of implementation of these missions as they progressed over four decades from the original SVLBI concepts to the operational status.     

FIRST — Far Infrared and Submillimetre Space Telescope

The present status of the ESA cornerstone mission FIRST is presented. A recent industrial study has generated a spacecraft concept employing a 4.5 m passively cooled telescope with focal plane instrument cooling provided by a superfluid helium cryostat. The model payload complement includes two direct detection instruments as well as two heterodyne instruments. After a shared launch by Ariane 5 into GTO, FIRST propels itself into the 24-hour highly eccentric operational orbit, where observations can be conducted up to 17 hours per day with an expected approximate mission duration of 3 years. An additional complementary study of a non-cryostat spacecraft option will also be performed.     

太阳高纬探测器的借力飞行轨道设计

行星借力飞行技术可以节省深空探测任务的能量消耗.针对借助内行星引力向太阳高纬度发射探测器这一科学任务,分别以金星和地球为借力星体,运用圆锥曲线拼接法,通过求解兰伯特问题绘制能量等高线图,搜索多天体交会发射机会,设计探测器与借力体轨道周期之比为1∶ 1或2∶ 3的多次借力行星际轨道,获得相对黄道面成大倾角的目标轨道.分析表明,采用多天体交会借力相比单天体借力可大大降低发射能量;3次借用金星或者地球的引力可以使探测器轨道相对黄道面的倾角达到30°左右;3次地球借力轨道性能为最优,需要的地球发射能量更低,而且飞行器进入目标轨道之前的转移时间较短.      

Gamma-ray burst localization with the international solar polar mission

The European Space Agency's Solar Polar spacecraft is scheduled for launch in 1986. A solar X-ray and cosmic gamma ray burst detector will be aboard. Although the solar polar mission will not provide the long baselines originally planned, due to the cancellation of the NASA spacecraft, it is shown that arrival time analysis between the remaining ESA spacecraft and other missions will nevertheless achieve extremely precise localizations.     

Detection and monitoring of earthquake precursors: TwinSat,a Russia–UK satellite project

There is now a body of evidence to indicate that coupling occurs between the lithosphere–atmosphere–ionosphere prior to earthquake events. Nevertheless the physics of these phenomena and the possibilities of their use as part of an earthquake early warning system remain poorly understood. Proposed here is a programme to create a much greater understanding in this area through the deployment of a dedicated space asset along with coordinated ground stations, modelling and the creation of a highly accessible database. The space element would comprise 2 co-orbiting spacecraft (TwinSat) involving a microsatellite and a nanosatellite, each including a suite of science instruments appropriate to this study. Over a mission duration of 3 years ∼ 400 earthquakes in the range 6–6.9 on the Richter scale would be ‘observed’. Such a programme is a prerequisite for an effective earthquake early warning system.     

Systems design of a hybrid sail pole-sitter

This paper presents the preliminary systems design of a pole-sitter. This is a spacecraft that hovers over an Earth pole, creating a platform for full hemispheric observation of the polar regions, as well as direct-link telecommunications. To provide the necessary thrust, a hybrid propulsion system combines a solar sail with a more mature solar electric propulsion (SEP) thruster. Previous work by the authors showed that the combination of the two allows lower propellant mass fractions, at the cost of increased system complexity. This paper compares the pure SEP spacecraft with the hybrid spacecraft in terms of the launch mass necessary to deliver a certain payload for a given mission duration. A mass budget is proposed, and the conditions investigated under which the hybrid sail saves on the initial spacecraft initial mass. It is found that the hybrid spacecraft with near- to mid-term sail technology has a lower initial mass than the SEP case if the mission duration is 7 years or more, with greater benefits for longer duration missions. The hybrid spacecraft with far-term sail technology outperforms the pure SEP case even for short missions.