半球谐振子疲劳寿命分析与仿真

半球谐振子的寿命和损伤是直接影响高精度半球谐振陀螺使用时长和安全性的重要因素。目前国内加工的半球谐振子所用的熔融石英玻璃材料主要依靠进口，采用传统的疲劳寿命实验确定方法成本过于昂贵，因此需要利用疲劳分析软件对半球谐振子的疲劳寿命进行分析。文章通过半球谐振陀螺应力分析，采用ANSYS软件对熔融石英半球谐振子进行应力分析仿真，确定因残余应力所引起的疲劳危险部位，并在疲劳部位进行裂纹扩展分析，得到 、 和 型应力强度因子，以使在半球谐振子结构设计和使用过程中对易疲劳的部位进行有效监控和预防。     

Far-UVC light as a new tool to reduce microbial burden during spacecraft assembly

This work aims to investigate far-UVC light at 222 nm as a new microbial reduction tool for planetary protection purposes which could potentially be integrated into the spacecraft assembly process. The major advantage of far-UVC (222 nm) compared to traditional germicidal UVC (254 nm) is the potential for application throughout the spacecraft assembly process in the presence of humans without adverse health effects due to the limited penetration of far-UVC light into biological materials. Testing the efficacy of 222-nm light at inactivating hardy bacterial cells and spores isolated from spacecraft and associated surfaces is a necessary step to evaluate this technology. We assessed survival of Bacillus pumilus SAFR-032 and Acinetobacter radioresistens 50v1 exposed to 222-nm light on proxy spacecraft surfaces simulated by drying the bacteria on aluminum coupons. The survival fraction of both bacteria followed a single stage decay function up to 60 mJ/cm², revealing similar susceptibility of both species to 222-nm light, which was independent of the exposure rate. Irradiation with far-UVC light at 222 nm is an effective method to decontaminate the proxy spacecraft materials tested in this study.     

基于模态反转的半球谐振陀螺零位自校准方法

针对半球谐振陀螺的零位漂移问题，本文研究了基于模态反转电路控制技术的零位自校准方法。首先，从动力学模型引入阻尼不对称、频率裂解等非理想因素，讨论半球谐振陀螺的工作机理及驻波漂移特性。其次，通过理论分析模态反转的零位校准以及虚拟进动控制的模态反转技术。最后，基于FPGA数字控制平台，设计并实现了半球谐振陀螺零位自校准半实物仿真实验。实验结果表明，基于模态反转的半球谐振陀螺零位校准，实现了半球谐振陀螺的零位从15 降低至2 ，短期零偏稳定性和长期稳定性也分别提高了11.8％和45.86％，有效地抑制了零位漂移，提高了半球谐振陀螺测量精度。     

飞机动态推出控制策略仿真优化模型

机场离港运行的无序化造成滑行过程中的长时间排队等待及大量燃油浪费。为了减少燃油消耗和废气排放,在已有的动态推出控制策略基础上提出了阶梯函数控制策略(Step function,SPC)和非线性函数动态推出策略(Nonlinear function,NPC)的一般形式,以离港成本为目标,建立了基于停机位等待惩罚的动态推出控制模型,在不延误的前提下提出了一种基于网格参数优化的蒙特卡洛仿真优化算法。通过北京首都机场实际运行数据对推出过程进行仿真计算,并与无控制策略以及传统N-control策略的最优可达解进行仿真对比,结果表明:在不延误的前提下,提出的推出策略可以更加有效地降低平均滑行道滑行时间,NPC策略的离港运行成本和燃油成本可降低45.52%和54.23%,SPC虽然成本节省劣于NPC策略,但是其简单的操作方式可以为离港推出调度方式的改进提供决策支持。     

A new dynamic pushback control method for reducing fuel-burn costs: Using predicted taxi-out time

Long departure-taxi-out time leads to significant airport surface congestion, fuel-burn costs, and excessive emissions of greenhouse gases. To reduce these undesirable effects, a Predicted taxi-out time-based Dynamic Pushback Control(PDPC) method is proposed. The implementation of this method requires two steps: first, the taxi-out times for aircraft are predicted by the leastsquares support-vector regression approach of which the parameters are optimized by an introduced improved Firefly algorithm. Then, a dynamic pushback control model equipped with a linear gate-hold penalty function is built, along with a proposed iterative taxiway queue-threshold optimization algorithm for solving the model. A case study with data obtained from Beijing International airport(PEK) is presented. The taxi-out time prediction model achieves predictive accuracy within 3 min and 5 min by 84.71% and 95.66%, respectively. The results of the proposed pushback method show that total operation cost and fuel-burn cost achieve a 14.0% and 21.1%reduction, respectively, as compared to the traditional K-control policy.(3) From the perspective of implementation, using PDPC policy can significantly reduce the queue length in taxiway and taxi-out time. The total operation cost and fuel-burn cost can be curtailed by 37.2% and 52.1%,respectively, as compared to the non-enforcement of any pushback control mechanism. These results show that the proposed pushback control model can reduce fuel-burn costs and airport surface congestion effectively.     

一种地理围栏内无人机航迹跟踪方法

针对UTM体制中无人机在地理围栏内的飞行监视问题,提出一种约束状态相关模态转换混合估计算法(CSDTHE)。采用随机线性混杂系统模型对无人机运动状态进行建模,利用CV、CT和CA三种模态描述无人机的飞行状态,以构建地理围栏内无人机运行的通用模态转换模型框架。利用飞行模态改变点(FMCP)定义相关模态转换参数,设计模态转换条件,生成模态转换概率矩阵,从而建立与状态相关的模态转换模型。运用约束卡尔曼滤波(CKF)方法对直线阶段和转弯阶段的无人机运动速度分别施加等式约束,并通过仿真实验验证了CSDTHE算法对无人机跟踪的有效性。     

空间相机低频隔振系统及试验验证

随着遥感卫星分辨率的提高。星上微振动对空间相机的影响越来越显著。在相机与卫星平台之间安装隔振装置,将飞轮、扫描机构等扰振源产生的振动与相机隔离开来是一种改善其工作环境的有效方法。文章介绍了针对中巴地球资源卫星研制的相机被动隔振系统,以及在地面结构星上进行的联合隔振性能测试。测试结果表明。传递至相机的两个主要扰振频率分量...     

临近空间高超声速滑跃式轨迹目标跟踪技术

针对临近空间目标飞行速度快、机动特性强和加速度突变的特性,提出一种地心直角(ECEF)坐标系下基于目标特性分析的修正强跟踪滤波(MSTF)算法。首先,通过对ECEF坐标系下目标量测的无偏转化处理,以有效减小目标高超声速飞行所带来的旋转、平移和线性化误差影响;接着,在对目标特性充分分析的基础上,合理构建强跟踪滤波(STF)模型,通过对模型参数的自适应调节,以有效实现临近空间高超声速滑跃式轨迹目标的精确跟踪;最后,结合统计学原理对目标加速度的突变进行合理检测和补偿,以进一步修正强跟踪滤波模型的跟踪精度。仿真结果表明,与现有的临近空间目标跟踪算法相比,该算法具有较高的定位跟踪精度。     

弯扭复合大负载下电动舵机设计及性能试验研究

针对弯扭复合大负载工况下电动舵机快速性与稳定性匹配的问题,在分析有限空间质量约束下舵机设计要求的基础上,采用基于核心部件与系统仿真及试验验证相结合的手段,提出了一种高刚度高功率密度的抗弯扭复合大负载电动舵机设计方法。详细阐述了高功率密度伺服电机和高刚度传动机构的设计过程,并研制了工程样机。试验结果表明:该电动舵机伺服刚度与功率密度得到显著提升,在复合大负载工况下能够实现高动态高可靠稳定运行。