太阳风中航天器带电与尾迹效应的模拟

航天器充电和尾迹效应会对周围等离子体造成扰动,影响测量装置结果的准确性.利用SPIS （Spacecraft Plasma Interaction Software）分别模拟了航天器与太阳风的相互作用,考察了光电效应以及航天器尺度对表面充电情况和尾迹效应的影响.结果表明:太阳风环境下,等离子体密度稀薄,电子电流比光电子电流小得多,航天器表面为正电势,航天器后部有清晰的尾迹结构,尾迹带负电;光电效应可改变尾迹结构,与无光电效应相比,光电效应使得航天器尾迹尺度变大;由于太阳风定向运动动能大于航天器表面势能,航天器的尾迹结构与其几何尺寸有关,航天器尺寸越大,尾迹尺度越大.      

太阳帆航天器的关键技术

将太阳帆航天器所涉及的关键技术划分为4个方面：总体设计、轨道和姿态动力学与控制、太阳帆材料及其性能、太阳帆折叠与展开。针对每项关键技术,基于对国外长期研究结果进行分析并阐述主要技术特征,梳理国内相关研究进展,包括笔者与合作者的研究成果,分析存在的主要问题。根据上述分析,指出我国发展太阳帆航天器应该重视的若干问题。     

小行星远距离抵近轨道

讨论了小行星引力一阶项可被忽略情况下的小行星远距离轨道设计及动力学。此时,航天器的运动受太阳引力和太阳光压的影响。航天器和小行星的加速度之差在这两者之间形成的独特的相对动力学,为航天器在小行星附近停驻与观测提供特定轨道。完整解决了小行星处于圆形日心轨道这一较简单情况,也考虑和阐述了椭圆轨道情况,并取得了一些初步结果。     

异面构型太阳能电池阵展开轨迹优化

简要介绍异面构型太阳能电池阵的构型及其展开过程.由于动力学耦合作用的存在,异面构型太阳能电池阵的展开运动会对飞行器的姿态产生影响,根据对系统角动量守恒方程的分析,采用余弦函数参数化关节角的运动轨迹,以太阳能电池阵运动前后航天器的姿态变化量为优化目标,通过遗传算法进行参数的寻优,最终得到一条对航天器姿态影响相对较小的太阳能电池阵的展开运动轨迹.给出一种异面构型太阳能电池阵机构,通过对其展开过程进行仿真分析,证明了所提方法的有效性.     

Science objectives of the magnetic field experiment onboard Aditya-L1 spacecraft

The Aditya-L1 is first Indian solar mission scheduled to be placed in a halo orbit around the first Lagrangian point (L1) of Sun-Earth system in the year 2018–19. The approved scientific payloads onboard Aditya-L1 spacecraft includes a Fluxgate Digital Magnetometer (FGM) to measure the local magnetic field which is necessary to supplement the outcome of other scientific experiments onboard. The in-situ vector magnetic field data at L1 is essential for better understanding of the data provided by the particle and plasma analysis experiments, onboard Aditya-L1 mission. Also, the dynamics of Coronal Mass Ejections (CMEs) can be better understood with the help of in-situ magnetic field data at the L1 point region. This data will also serve as crucial input for the short lead-time space weather forecasting models.The proposed FGM is a dual range magnetic sensor on a 6?m long boom mounted on the Sun viewing panel deck and configured to deploy along the negative roll direction of the spacecraft. Two sets of sensors (tri-axial each) are proposed to be mounted, one at the tip of boom (6?m from the spacecraft) and other, midway (3?m from the spacecraft). The main science objective of this experiment is to measure the magnitude and nature of the interplanetary magnetic field (IMF) locally and to study the disturbed magnetic conditions and extreme solar events by detecting the CME from Sun as a transient event. The proposed secondary science objectives are to study the impact of interplanetary structures and shock solar wind interaction on geo-space environment and to detect low frequency plasma waves emanating from the solar corona at L1 point. This will provide a better understanding on how the Sun affects interplanetary space.In this paper, we shall give the main scientific objectives of the magnetic field experiment and brief technical details of the FGM onboard Aditya-1 spacecraft.     

Planet-A mission to Halley

Looking at the chance of the next apparition of the Halley comet in 1986, ISAS decided to send a first Japasanese interplanetary spacecraft for the study of cometary hydrogen coma and solar wind. The Planet-A spacecraft which carries VUV imaging camera and solar wind plasma analyser will be launched in August 1985 and flyby the Halley comet in early March 1986 with the distance of several million kilometers from the comet nucleus. This mission is not only self-consistent but collaborative with other space mission as well as earth-bound observations. In the present paper, the Planet-A mission to Halley is described with brief explanation of the spacecraft.     

Solar ring mission: Building a panorama of the Sun and inner-heliosphere

Solar Ring (SOR) is a proposed space science mission to monitor and study the Sun and inner heliosphere from a full 360° perspective in the ecliptic plane. It will deploy-three 120°-separated spacecraft on the 1-AU orbit. The first spacecraft, S1, locates 30° upstream of the Earth, the second, S2, 90° downstream, and the third, S3, completes the configuration. This design with necessary science instruments, e.g., the Doppler-velocity and vector magnetic field imager, wide-angle coronagraph, and in-situ instruments, will allow us to establish many unprecedented capabilities: (1) provide simultaneous Doppler-velocity observations of the whole solar surface to understand the deep interior, (2) provide vector magnetograms of the whole photosphere — the inner boundary of the solar atmosphere and heliosphere, (3) provide the information of the whole lifetime evolution of solar featured structures, and (4) provide the whole view of solar transients and space weather in the inner heliosphere. With these capabilities, Solar Ring mission aims to address outstanding questions about the origin of solar cycle, the origin of solar eruptions and the origin of extreme space weather events. The successful accomplishment of the mission will construct a panorama of the Sun and inner-heliosphere, and therefore advance our understanding of the star and the space environment that holds our life.     

The interstellar heliopause probe technology reference study

The interstellar heliopause probe (IHP) is one of ESA’s technology reference studies (TRS). The TRS aim to focus the development of strategically important technologies of relevance to future science missions by studying technologically demanding and scientifically interesting missions that are currently not part of the science mission programme.

Equipped with a highly integrated payload suite (HIPS), the IHP will perform in situ exploration of the heliopause and the heliospheric interface. The HIPS, which is a standard element in all TRSs, miniaturize payloads through resource reduction by using miniaturized components and sensors, and by sharing common structures and payload functionality.

To achieve the scientific requirements of the mission, the spacecraft is to leave the heliosphere as close to the heliosphere nose as possible and reach a distance of 200 AU from the Sun within 25 years. This is possible by using a trajectory with two solar flybys and a solar sail with characteristic acceleration of 1.1 mm/s², which corresponds to a 245 × 245 m² solar sail and a sail thickness of 1–2 μm. The trajectory facilitates a modest sail design that could potentially be developed in a reasonable timeframe.

In this paper, an update to the results of studies being performed on this mission will be given and the current mission baseline and spacecraft design will be described. Furthermore, alternative solar sail systems and enabling technologies will be discussed.     

载人航天器的发射窗口及太阳能帆板的最佳受晒

首先根据载人航天器轨道运行段的基本特征,利用球面三角公式推导了：①阳光方向与载人航天器太阳能帆板法向的最佳夹角公式;②圆轨道的受晒因子公式。然后根据理论分析,引入帆板的效率系数。最后借助于计算机代数ｍａｔｈｅｍａｔｉｃａ系统,建立了一种分析帆板最佳受晒的直观、清晰、简便的方法。所得的结论为确定载人航天器的发射窗口提供了依据。     

CubeSail: A low cost CubeSat based solar sail demonstration mission

CubeSail is a nano-solar sail mission based on the 3U CubeSat standard, which is currently being designed and built at the Surrey Space Centre, University of Surrey. CubeSail will have a total mass of around 3 kg and will deploy a 5 × 5 m sail in low Earth orbit. The primary aim of the mission is to demonstrate the concept of solar sailing and end-of-life de-orbiting using the sail membrane as a drag-sail. The spacecraft will have a compact 3-axis stabilised attitude control system, which uses three magnetic torquers aligned with the spacecraft principle axis as well as a novel two-dimensional translation stage separating the spacecraft bus from the sail. CubeSail’s deployment mechanism consists of four novel booms and four-quadrant sail membranes. The proposed booms are made from tape-spring blades and will deploy the sail membrane from a 2U CubeSat standard structure. This paper presents a systems level overview of the CubeSat mission, focusing on the mission orbit and de-orbiting, in addition to the deployment, attitude control and the satellite bus.     

“新视野号”探测冥王星及柯伊伯带综述

迄今为止飞得最快的航天器、人类发射的第一个冥王星探测器——"新视野号",经过约9年的行星际旅行,于2015年1月15日抵达距地球约47亿千米的冥王星附近,开始探测冥王星、冥卫、以及它们所处的柯伊柏带其他天体。柯伊柏带是1992年才发现的太阳系新大陆,虽然冥王星已被重新定义为矮行星,却从一颗颇具争议的行星成为数千颗冰冻小天体的"领头羊"。本文介绍了"新视野号"的科学目标和有效载荷,分析了"新视野号"采用的探测器长期休眠、木星借力、太空核能等关键技术,探讨了冥王星和柯伊柏带探测的意义。作为太阳系的冷库,柯伊伯带天体保留着太阳系形成时的原始状态,对它的探测,有助于揭示太阳系行星形成时的关键环节。"新视野号"也可能发现新的太阳系行星,其成果将有助于我们更深入地认识太阳系。     

太阳帆航天器编队维持和重构的方法研究

针对高面质比航天器可以利用太阳光压进行轨道控制的特点,本文提出一种太阳帆航天器编队构型维持和重构的方法.该方法通过控制主从航天器太阳帆姿态角和反射系数,调整主从航天器之间的光压差,产生抵消编队成员间相对运动受到摄动差或进行轨道机动时所需的连续小推力,从而实现编队构型的维持和重构.仿真结果表明,在主航天器太阳帆的姿态角和反射系数相对固定的条件下,对于太阳同步轨道上的高面质比太阳帆航天器编队,使用滑模控制方法,能够调整编队中从航天器太阳帆的姿态角和反射系数产生推力抵消摄动力影响,达到长期维持太阳帆航天器编队构型的目的;通过开环控制方法,能够调整编队中从航天器太阳帆的姿态角和反射系数产生连续小推力,在较长时间周期内实现编队重构.     

Dynamics of solar cosmic ray events: Processes at large heliocentric distances (⪢1 AU)

Observations of solar cosmic ray events far from the sun (?1 AU) became possible after the launch of Pioneer 10 in 1972. Four spacecraft have now travelled beyond the orbit of Jupiter - Pioneer 10/11 and Voyager 1/2 — and are producing a growing body of distant observations of solar cosmic ray events. Initial studies using Pioneer 10/11 data out to ～6 AU interpreted flare particle observations in terms of a diffusion model, including the effects of convection and adiabatic energy loss. This model enjoyed general success in explaining the time-intensity profiles in cases where the spacecraft connection longitude at the sun did not change significantly with time. The results implied that the radial diffusion coefficient (K_r) increased slowly with distance over that radial range. More recent results at larger distances imply that K_r may begin to decrease beyond ～5 AU. It is not yet clear whether the standard diffusion model will be adequate to explain solar events well beyond 5 AU. The fact that large events at very large distances can last up to two solar rotations implies that solar wind stream structure will also play a role in the event dynamics. In general, however, observations at large distances offer perhaps the best hope of separating interplanetary propagation effects from coronal storage and propagation effects which frequently dominate observed event profiles at 1 AU.     

A new modeling method of solar energetic proton events for ISO specification

Solar energetic protons degrade performance and reliability of spacecraft systems due to single-event effects, total dose effects and displacement damage in electronics components including solar cells. On designing a solar cell panel, a total fluence of solar energetic protons (SEPs) which cause solar cell damage is needed to estimate power loss of the solar cells over mission life. Nowadays a solar panel area of spacecraft is increasing as spacecraft mission life becomes longer (15–18 years). Thus an accurate SEP model is strongly required for the cost-minimum design from the aerospace industry. The SEP model, JPL-91 proposed by Feynman et al., is currently used widely for solar cell designing. However, it is known that the JPL-91 model predicts higher fluences of protons than values actually experienced in space, especially after 7 years on orbit. In addition, the model is based on several assumptions, and also needs Monte-Carlo simulations for calculating fluences. In this study, we propose a new method for modeling SEPs especially focused on solar cell degradation. The newly-proposed method is empirical, which constructs a model based directly upon proton flux measurement data taken by instruments onboard spacecraft. This method has neither assumptions nor dependence on SEP event selection, both of which are needed in JPL-91. The model fluences derived from this method show lower fluences in longer missions compared to JPL-91. This method has been proposed to ISO (International Organization for Standardization) and has been discussed for a new standard SEP model.     

载人航天器体装太阳电池阵有效发电面积计算方法

航天器的发电能力与太阳电池阵有效发电面积成正比。针对圆柱形载人航天器，提出了一种体装太阳电池阵有效发电面积计算方法。首先，将太阳电池阵沿圆周方向划分为多个子阵，通过坐标变换，计算太阳矢量与每个子阵法线的夹角（即太阳入射角）；然后，将每个子阵面积与对应太阳入射角的余弦相乘并求和，得到体装太阳电池阵的有效发电面积。对不同轨道日照角、不同飞行姿态下体装太阳电池阵有效发电面积进行仿真分析，仿真结果表明:三轴对地姿态下平均有效发电面积为安装面积的25%~32%，通过固定角度偏航可将有效发电面积提高至安装面积的30%~44%。      

载人飞船阻尼摄动模型和轨道预报精度

在正常飞行状态下，飞船保持三轴稳定和对地定向姿态，其时太阳翼指向不是气流方向，它的阻尼模型较为复杂。文章阐述了载人飞船大气阻尼摄动模型将本体和太阳翼分开处理的必要性；对中国局域网的USB跟踪测量，轨道确定和预报达到了制动返回所需要的较高精度。     

Comment on estimating the solar proton environment that may affect Mars missions.

Estimates of the energetic proton environment for a Mars mission are generally extrapolated from the solar proton observations at 1 AU. We find that solar particle events may be divided into two general classes. Events dominated by a near-sun injection of particles onto interplanetary magnetic field lines leading to the spacecraft position represent the "classical" solar particle event associated with solar activity. This class of event will scale in radial distance by the classical power law extrapolation. The extended-interplanetary-shock source generates a maximum flux as the shock passes the detection location. This class of event typically generates maximum fluence, but in this case, the flux and fluence will not scale in the classical manner with radial distance.     

Cosmic rays in the dynamic heliosheath

Cosmic ray modulation in the outer heliosphere is discussed from a modeling perspective. Emphasis is on the transport and acceleration of these particles at and beyond the solar wind termination shock in the inner heliosheath region and how this changes over a solar cycle. We will show that by using numerical models, and by comparing results to spacecraft observations, much can be learned about the dependence of cosmic ray modulation on solar cycle changes in the solar wind and heliospheric magnetic field. While the first determines the heliospheric geometry and shock structure, the latter results in a time-dependence of the transport coefficients. Depending on energy, both these effects contribute to cosmic ray intensities in the inner heliosheath changing over a solar cycle.     

Systems design of a hybrid sail pole-sitter

This paper presents the preliminary systems design of a pole-sitter. This is a spacecraft that hovers over an Earth pole, creating a platform for full hemispheric observation of the polar regions, as well as direct-link telecommunications. To provide the necessary thrust, a hybrid propulsion system combines a solar sail with a more mature solar electric propulsion (SEP) thruster. Previous work by the authors showed that the combination of the two allows lower propellant mass fractions, at the cost of increased system complexity. This paper compares the pure SEP spacecraft with the hybrid spacecraft in terms of the launch mass necessary to deliver a certain payload for a given mission duration. A mass budget is proposed, and the conditions investigated under which the hybrid sail saves on the initial spacecraft initial mass. It is found that the hybrid spacecraft with near- to mid-term sail technology has a lower initial mass than the SEP case if the mission duration is 7 years or more, with greater benefits for longer duration missions. The hybrid spacecraft with far-term sail technology outperforms the pure SEP case even for short missions.     

一种深空粒子采样返回探测器构型设想

以太阳风粒子、深空尘埃等为目标的采样返回探测任务是空间科学与深空探测研究的热点方向之一。对“星尘号”“起源号”两个典型采样返回探测器的构型进行了分析,并梳理了其主要构型特点。结合我国月地高速再入返回飞行器的构型特点,提出了一种深空粒子采样返回探测器构型的设想：总体构型由长方形主体和流线型返回器组成,主体构型适应于承载返回器和其他装器设备,返回器构型适应于样品收集和再入返回气动外形。设计方案采用了充气式采样器进行粒子收集,具有体积小、重量轻、折叠效率高、展开可靠、工程实施简单等特点,并采用了可重复收拢展开的太阳翼,能够适应收集不同类型深空粒子的需求。