Usage of pre-flight data in short rendezvous mission of Soyuz-TMA spacecrafts

The paper describes the reduction of the vehicle autonomous flight duration before docking to the ISS. The Russian Soyuz-TMA spacecraft dock to the ISS two days after launch. Due to the limited volume inside Soyuz-TMA the reduction of time until docking to the ISS is very important, since the long stay of the cosmonauts in the limited volume adds to the strain of the space flight. In the previous papers of the authors it was shown that the existing capabilities of Soyuz-TMA, the ISS and the ground control loop make it possible to transfer to the five-orbit rendezvous profile. However, the analysis of the cosmonauts' schedule on the launch day shows that its duration is at the allowable limit and that is why it is necessary to find a way to further reduce the flight duration of Soyuz-TMA before docking to less than five orbits. In a traditional rendezvous profile, the calculation of rendezvous burns begins only after determination of the actual vehicle insertion orbit. The paper describes an approach in which the first two rendezvous burns are performed as soon as the spacecraft reaches the reference orbit and the values of the burns are calculated prior to the launch based on the pre-flight data for the nominal insertion. This approach decreases the duration of the rendezvous by one orbit. The demonstration flight of a Progress vehicle using the proposed profile was implemented on August 1, 2012 and completely confirmed the correctness of the imbedded principles. The paper considers the possible improvements of the proposed approach and recovery from the contingencies.     

Profiles of quick access to the orbital station for modern spacecraft

The problems of decreasing the duration of the autonomous flight of a spacecraft (SC) before the docking with an orbital station (OS) are considered in this paper. Modern SCs should be docked with the International Space Station (ISS) with an arbitrary initial phase angle; for this reason, the rendezvous of the Russian Soyuz-TMA spacecraft with the ISS is performed for 2 days. The paper presents to consideration some new flight profiles with essentially smaller duration. The results of modeling the developed rendezvous profiles are presented and solutions to emergency situations are considered.     

Missions to the asteroid anteros and the space of true anomalies

Three opportunities for missions to rendezvous ballistically with the Earth-crossing asteroid Anteros are studied to illustrate the requirements for a trip to a near-Earth minor planet. The rationale, sample payload, spacecraft requirements and trajectory characteristics of these opportunities are typical of a rendezvous mission to an accessible near-Earth object. Round trip ballistic trajectories to return small samples of the asteroid with launch dates between 1985 and 2000 are also presented. Contours of minimum total ΔV drawn in the space of launch and arrival true anomalies, given the designation Prime Rib curves, are introduced as a useful tool for mission design.     

航天器交会对接发射时间的选择与确定

在航天器交会对接飞行试验中,追踪飞船与目标飞船发射时间的选择不是独立的,而是相互关联的,并且涉及多方面因素,如轨道共面要求、对太阳电池帆板的日照角限制以及最终平移段目标飞船的照明需求等。综合考虑这些约束条件,提出追踪飞船与目标飞船发射时间选择与确定的方法,并以图表形式给出许多模拟计算结果,对航天器交会对接设计与飞行试验具有应用价值。     

探月飞行的调相轨道

早期的探月飞行都采用直接由地球飞到月球的地月转移方式,探测器由运载火箭直接发送到地月转移轨道,这样做的好处是飞行时间比较短,只需3至5天的时间。20世纪90年代开始的新一轮探月活动中采用了一种新的飞行方式,探测器飞离地球前,先在绕地球飞行的调相轨道上运行若干圈,这样做的好处有三：一是可以在运载火箭能力不够的情况下,由探测器来补充;二是可以减小转移轨道中途修正的负担;三是可以扩大发射机会窗口。文章以嫦娥一号探测器及美、日的两个月球探测器为例,详细讨论了这种新的飞行方式,同时还对我国后续探月计划的飞行轨道提出了初步建议。     

国外中继卫星对航天器交会对接的测控通信支持

中继卫星系统的天基测控通信是近代航天技术的重大突破,它能够有效地满足航天器交会对接的测控通信需要。文章分析了美国＂跟踪与数据中继卫星系统＂（TDRSS）和欧洲＂阿特米斯＂（ARTEMIS）中继卫星对＂自动转移飞行器＂（ATV）与＂国际空间站＂（ISS）交会对接任务的测控通信支持,总结了国外中继卫星系统支持航天器交会对接...     

中国首次交会对接任务的技术成就和展望

首次交会对接任务的成功实施,使中国突破和基本掌握了航天器交会对接及其组合体的控制与管理技术,标志着中国载人航天工程二期任务取得重大突破,为空间实验室及后期空间站的建设奠定了坚实基础。文章对国内外交会对接技术进行了对比,对所取得的技术成就进行了综述,指出任务成功具有提升国家威望、产生广泛社会效益、带动基础学科发展、推动航...     

ATV交会飞行控制策略研究

"自动转移飞行器"(ATV)是欧洲航天局(ESA)服务"国际空间站"(ISS)的项目.ATV货运飞行器自动执行调相,交会与对接、分离、降轨,以及受控毁坏性再入.ATV对ISS的交会对接可脱离地面控制自主完成,ATV交会使命将朝向栽人航天飞行发展,高度自主性与严格安全性是ATV使命设计的主要特点.在自主交会飞行期间,飞行...     

One hundred US EVAs: a perspective on spacewalks

In the 36 years between June 1965 and February 2001, the US human space flight program has conducted 100 spacewalks, or extravehicular activities (EVAs), as NASA officially calls them. EVA occurs when astronauts wearing spacesuits travel outside their protective spacecraft to perform tasks in the space vacuum environment. US EVA started with pioneering feasibility tests during the Gemini Program. The Apollo Program required sending astronauts to the moon and performing EVA to explore the lunar surface. EVA supported scientific mission objectives of the Skylab program, but may be best remembered for repairing launch damage to the vehicle and thus saving the program. EVA capability on Shuttle was initially planned to be a kit that could be flown at will, and was primarily intended for coping with vehicle return emergencies. The Skylab emergency and the pivotal role of EVA in salvaging that program quickly promoted Shuttle EVA to an essential element for achieving mission objectives, including retrieving satellites and developing techniques to assemble and maintain the International Space Station (ISS). Now, EVA is supporting assembly of ISS. This paper highlights development of US EVA capability within the context of the overarching mission objectives of the US human space flight program.     

利用载人航天器进行热控涂层舱外搭载试验研究

为了解空间环境对热控涂层性能的影响,文章设计了舱外热控涂层搭载试验方案,包括试验件配置、在轨试验和回收方法。试验件在轨试验期间安放在载人航天器密封舱前舱门外,暴露于空间环境中;在实现对接、建立组合体后,航天员不需太空行走即可实施对搭载试验件的回收及再次安装等操作。该方案若成功应用并回收试验件至地面,我国将首次获得热控涂层空间飞行试验数据。     

面向木星卫星交会任务的探测器飞行路径规划

针对探测器在木星系统内多次借力的飞行路径和轨道优化设计问题,提出了一种基于三层优化思想的飞行路径规划方法,该方法可根据给定的任务约束和交会目标,自动搜索探测器在木星系统内的借力飞行序列,同时完成标称飞行轨道的优化设计。首先,文章在给定轨道动力学模型和木卫借力模型基础上,建立了面向木卫交会任务的两次借力飞行轨道优化设计模型和求解方法;然后,采用结合遗传算法、全局遍历和贪婪算法的三层优化设计思路,给出了一种环木飞行路径规划方法;最后,以木星四颗卫星的交会任务为例进行了仿真分析。仿真结果表明：针对木卫的交会任务,探测器速度增量需求随木卫借力次数的增多,呈现先显著减小后逐渐增大的现象;探测器采用多次木卫借力的策略,可显著降低探测器的速度增量需求;探测器速度增量达到最优之后,借力目标收敛于交会目标,且速度增量随借力次数的进一步增多而逐渐增大。     

苏/俄交会对接技术研究

苏/俄交会对接技术的研发,最初是为20世纪60年代初苏联月球使命服务的,后来主要用于空间站的运输使命。因此,最初的＂联盟＂飞船逐步演变发展为联盟号载人飞船系列与进步号货运飞船系列。联盟号和进步号飞船应用＂指针＂或＂航向＂交会雷达系统,基本采用自动轨道交会方法。对应急运作,联盟号航天员可使用手控器;对于不载人的进步号使命...     

基于气动辅助变轨的变气动外形飞行器概念研究--最优控制律问题

从一个天地往返飞行器的上升轨道和再入返回轨道的优化，以及适用不同飞行任务的变轨要求的气动外形问题，提出一项基于气动力辅助变轨的变气动外形飞行器的新概念研究。对于一个固定气动外形飞行器要同时满足上升轨道有效载荷最大和再入轨道热流峰值、过载峰值及机动性能约束下的成本最低往往是困难的。若同时满足不同飞行任务：飞往太空站的运输任务，空间拦截和交会机动巡航任务及星际探测任务，则更为困难，实际上是不可能的。文章研究基于气动力辅助变轨，在热流约束下，气动外形参数变化对最优控制的影响。其结论为：热流约束下的最优控制解，包括考虑推力协同变轨，除了在非约束弧的滚转角不直接受气动外形影响外，其余的控制律，升力系数和滚转角都是气动外形参数和攻角的函数。因而变气动外形可作为一项新技术，即通过气动外形参数变化和相应的变轨策略而获得性能和成本都最佳的用途很广的一种新型飞行器。     

A Concept of Guidance for an Air-Launch Vehicle with Compensation of Initial Downrange and Launch Time Errors at Direct Insertion into a Rendezvous Point in the Orbit

A flying launcher (airplane carrier) can generate initial errors in position and time of launch. In order to compensate for these errors, one should have two control parameters in addition to those that provide for a spacecraft's injection into a preset orbit. We suggest the concept of controlling the trajectory of injection by choosing thrust values (within allowable regions of control) of second-stage engines or/and of a space booster of the Polyot carrier launcher. As an example, a rendezvous of the spacecraft at the end of its boost phase with the International Space Station (ISS) is considered. The methodology of the suggested approach can be extended to other mobile systems of launch to rendezvous orbits.     

载人飞船交会对接及组合体模式下的数据管理

根据有人参与的交会对接任务,其飞行器间通信、遥测模式多变和手控参与多的数据管理特点,文章从两飞行器间的总线通信与并网管理、遥测管理、手控支持等方面,提出了在自主交会对接过程中和组合体状态下的数据管理解决途径,经过成功执行我国首次交会对接飞行任务,验证其合理可行,可靠性和安全性高,可满足交会对接数据管理需求。     

Maiden Flight of Long March 7——The New Generation Medium Launch Vehicle in China

On June 25, 2016, the Long March 7(LM-7) launch vehicle completed its maiden flight successfully. LM-7, as a new generation of medium and basic launch vehicle based on the design concepts of non-toxic and nonpolluting, was developed for the purpose of launching a cargo spacecraft to the Chinese space station. Based on the experience on launching cargo spacecraft and satellites, LM-7 can be adapted for mainstream satellite launch missions in the future with its characteristics of serialization and continuous optimization. LM-7 is expected to be used to launch manned spacecraft in the future. This paper presents a general review of LM-7 with regard to the general scheme and provides references for the development prospects of a medium launch vehicle series in China.     

基于液相污染模型的航天器交会对接羽流污染研究

航天器交会对接任务一般由主动对接方和被动目标配合完成,交会对接飞行的主动寻的段和分离撤离段均可能出现主动对接方开启反向发动机进行反向紧急制动和撤离的情况,该情况下被动目标可能受到来自主动方反向发动机羽流污染影响。文章利用国际空间站羽流污染计算模型对交会对接任务羽流污染沉积进行了分析计算。     

Sсheme of rendezvous mission to lunar orbital station by spacecraft launched from Earth

In recent years, great experience has been accumulated in manned flight astronautics for rendezvous in near-Earth orbit. During flights of Apollo spacecraft with crews that landed on the surface of the Moon, the problem of docking a landing module launched from the Moon’s surface with the Apollo spacecraft’s command module in a circumlunar orbit was successfully solved. A return to the Moon declared by leading space agencies requires a scheme for rendezvous of a spacecraft launched from an earth-based cosmodromee with a lunar orbital station. This paper considers some ballistic schemes making it possible to solve this problem with minimum fuel expenditures.     

首次交会对接任务发射场加注安全保障改进

载人航天器加注是航天器研制过程中安全风险最高、危险作业工序最多的环节,必须采取严密的安全防护措施,确保万无一失.通过实践探索积累经验,全面周密的设计论证,对原有加注硬件条件进行改造,工作流程进行优化,从而大幅提高本质安全度,并在首次交会对接任务中加以应用和验证,取得了良好的效果,圆满完成了“天宫一号”、“神舟八号”发射...     

发展X-37B空间飞机的背后动因分析

文章通过对X-37B飞行器的飞行试验任务分析,指出了X-37B飞行器不是空天飞机,也不是全球快速打击平台,而是一种低成本太空进入能力的飞行验证器,它的作用定位在空间而不是在空中。通过飞行试验和验证试验,旨在打造一个可重复使用的轨道转移运载器。将美国2010年航天战略的重大调整、国际空间站的运行延期和航天飞机退役等事件结合起来,对X-37B发展的背后动因进行分析,有助于了解美国航天发展的未来趋势。经过动因的详尽分析,指出要特别关注美国航天战略调整的两个重心转向,尤其是两个转向背后的动机。如何正确地认识国际空间站的作用定位,对于审视载人航天的未来发展有重要意义。美国航天战略的调整使载人航天的重心回到近地轨道上。基于中国目前的能力现实,建议中国的载人航天重心放在地球轨道上,做好各种能力的建设,并利用这些能力把地球轨道上的事做得更好。