共查询到20条相似文献,搜索用时 125 毫秒
1.
2.
3.
秦超华 《西安航空技术高等专科学校学报》2004,22(5):35-38
印制电路板的设计与装配焊接是电子产品开发和制造的重要环节。本文从印制电路板总体设计方案的构思、结构尺寸的确定、元器件及导线的布局、虚焊的目测和预防等方面进行了深入探讨。 相似文献
4.
严世能 《航空精密制造技术》1988,(2)
本文简要地介绍航空机载电子行业制造技术中较为突出的四个问题,即印制电路板技术、表面安装技术、微电子组装技术和防护工艺。文中重点介绍印制电路板技术,并将我国的现状和国外的水平进行对比, 找出差距,进而指出了今后的发展方向和途径。 相似文献
5.
本文简述军用计算机采用SMT及其THM和SMT混装印制电路组装板的热加固技术,包括SMT简介、SMT及其THM和SMT混装印制电路组装扳的热设计考虑、金属芯印制电路板简介、金属芯印制电路组装板传热计算、金属芯印制电路板和普通印制电路板的热模拟对比试验等。论文中提出的金属芯印制电路组装板的热加固技术,可供逐步采用SMT及其THM和SMT混装印制电路组装板的军用计算机热设计与热性能试验参考。 相似文献
6.
7.
8.
卓 《航空精密制造技术》1993,(2)
日本最近开发了在氮气环境中焊接印制电路板上引线元件的新技术。由于在氮气环境中焊接,抑制了焊料及基板的氧化作用,不仅提高了焊接电路板的强度及可靠性,而且焊后毋需用大量污染环境的且价格昂 相似文献
9.
10.
南京航空学院机械厂设计生产的ZKH印制板数控钻床,可对印制电路板进行自动钻孔加工。这项成果已通过了部级技术鉴定,专家们一致认为其水平处于国内同类产品的领先地位。 相似文献
11.
给出了一种用于新型悬浮结构的使用差分电容进行角度检测的电路分析。为了确保电路具有较小的非线性和高分辨率,进行了电路的噪声分析和和输出信号的非线性度仿真。在电容检测接口中,使用了电荷积分放大器作为前置级以消除由于电容接线引起的寄生电容。分析了当存在耦合电容时差分电容桥的输出以及输出信号的非线性误差,分析结果显示该检测电路可以实现高分辨率和低非线性的角度检测。使用 PSpice 仿真并制作了电容检测印刷电路板。实际实验中,该电路可以检测的最小角度分辨率为 0.04o,非线性误差为 2.3%。 相似文献
12.
Keenan E. Wright R.G. Zgol M. Mulligan R. Tagliava V. Kirkland L.V. 《Aerospace and Electronic Systems Magazine, IEEE》2004,19(6):9-15
This paper describes research and development efforts in the use of infrared (IR) laser beams for detecting failures in integrated circuits resident on printed circuit boards. This work involves taking advantage of the transparency of the silicon substrate of ICs to radiation in the near infrared (NIR) spectrum to devise a non-invasive method for imaging the component circuitry of the IC. The implication is that a means to see into the physical structure of an integrated circuit can be created by using lasers tuned to these wavelengths. While the silicon substrate is transparent to the laser, the circuit paths and devices embedded within the substrate are readily visible since their metallic composition is opaque to laser energy at this wavelength. A laser test fixture consisting of a 1064 nm continuous wave laser, CCD camera, and image acquisition board is used to generate images from flip-chip integrated circuits. Multiresolution image processing techniques are then applied to the resulting images to identify potential defects. 相似文献
13.
杂散光会引起像质模糊和对比度下降,降低像面的信噪比,严重影响了光学系统的成像质量,必须进行消除。针对激光探潜系统中红外光和蓝绿光分离的光学系统,分析了红外系统中杂散辐射和蓝绿光系统中杂散光来源,给出了相应的杂散辐射和杂散光的抑制措施,为激光探潜系统光学系统的进一步优化设计提供了参考,展望了消杂光技术未来的发展趋势。 相似文献
14.
无人机载多传感器图像融合评述 总被引:1,自引:1,他引:0
为了能为作战指挥系统提供清晰的局部战场信息,提高对局部战场低可观测目标的检测概率、定位精度及识别概率,迫切需要对无人机载SAR、可见光传感器、红外探测器等图像信息及其他非图像信息融合处理。提出了无人机载多传感器图像融合技术需要研究的内容,如: 图像融合新方法研究;无人机载SAR图像的非平稳性处理;基于图像融合目标检测和处理技术; 无人机载图像和非图像信息的融合问题;无人机载多传感器图像融合的实现及评估;多无人机载合成孔径雷达的协同成像;用图像融合的方法实现对运动目标检测等。分析了所提出研究内容的可行性,剖析了其中的关键技术,拟定了可能的技术路线。 相似文献
15.
Margalit A. Reed I.S. Gagliardi R.M. 《IEEE transactions on aerospace and electronic systems》1985,(3):394-405
A method for target detection that achieves clutter rejection by the use of multiple observations of the same target scene is developed. Multiple scene observations can be obtained by processing separate frequency bands of the same target scene or by recursively processing sequential observations in time. Optimal detection algorithms are developed, based on the assumption that the image intensity can be modeled as a variable mean spatial Gaussian process. Several fast detection algorithms are derived which make use of the fact that the covariance matrices of many optical and infrared (IR) images can be accurately approximated by diagonal matrices. These algorithms provide efficient solutions to the problem of processing multiple correlated scenes or multiple sequential imaging. Computer simulations based on actual optical and IR image data were used for checking the theoretical results. The new detection algorithms achieved performance improvement in detection signal-to-noise ratio of up to 10 dB over conventional target correlation methods. 相似文献
16.
多光谱手指静脉图像信息采集对提高手指静脉识别性能具有重要意义,从活体组织的不同介质对不同波长的入射光有不同的散射和吸收性能这一角度出发,建立了多光谱手指静脉成像采集系统。重点介绍基于数码管控制芯片的多波段光源控制电路而搭建的硬件系统及设计的相应软件系统。该系统不仅解决了多模态手指静脉图像成像与采集的一些基本问题,而且为多光谱手指静脉识别奠定了数据基础和实验环境。这对促进手指静脉识别技术的发展具有重要意义。 相似文献
17.
刚 - 挠印制板制作工艺浅析 总被引:1,自引:0,他引:1
王芝贤 《航空精密制造技术》2001,37(4):42-44
简要介绍了刚-挠印制板的特点及应用范围,并重点分析了挠性板和刚-挠板的制作工艺难点. 相似文献
18.
19.
用Protel DXP设计电路板的原理和方法 总被引:1,自引:0,他引:1
李精华 《西安航空技术高等专科学校学报》2006,24(3):20-22
对普通用户而言,使用Protel软件最多的是其基本功能。通过介绍Protel DXP电路板设计流程,提出了快速运用该软件正确设计电路原理图和印刷板PCB图的步骤和方法。 相似文献