基于刚体转动四元数模型的航天器再定向方案

介绍了一种新的刚体转动的四元数模型。这些模型可以提高再定向控制的对边界条件的适应能力，在此基础上还介绍了这些模型的一些实际应用。     

Determination of parameters of attitude motion of a small communication satellite using the data of measurements of current of solar panels

A communication satellite (small spacecraft) injected into a geosynchronous orbit is considered. Flywheel engines are used to control the rotational spacecraft motion. The spacecraft after the emergency situation has passed into a state of uncontrolled rotation. In this case, no direct telemetric information about parameters of its rotational motion was accessible. As a result, the problem arose to determine the rotational satellite motion according to the available indirect information: current taken from the solar panels. Telemetric measurements of solar panel current obtained on the time interval of a few hours were simultaneously processed by the least squares method integrating the equations of rotational satellite motion. We present the results of processing 10 intervals of the measurement data allowing one to determine the real rotational spacecraft motion and to estimate the total angular momentum of flywheel engines.     

On solving the problems of optimization of trajectories of many-revolution orbit transfers of spacecraft

The problem of optimal control over many-revolution spacecraft orbit transfers between circular coplanar orbits of satellites is considered. The spacecraft flight is controlled by a thrust vector of a jet engine with restricted thrust (JERT). The mass expenditure is minimized at a limited time of flight. The optimal control problem is solved based on the maximum principle. The boundary value problem of the maximum principle is solved numerically using the shooting method. A modified computation scheme of the shooting method is suggested (multi-point shooting), as well as a method (correlated with the scheme) of choosing the initial approximation with the use of a solution to the optimization problem in the impulse formulation. The scheme and method allow one to construct many-revolution spacecraft orbit transfers.     

多自由度微振动环境时域波形复现的数值仿真

为满足航天器微振动环境模拟的需要,开展了多自由度微振动时域波形复现控制方法研究。首先,介绍了基于时域波形复现的多自由度微振动环境模拟控制理论方法。其次,针对六自由度微振动激励系统,应用MATLAB软件建立了基于实测传递函数矩阵的多输入多输出微振动激励仿真系统,针对微振动时域波形复现闭环控制过程进行了算法编程,并给出了仿真的闭环控制流程图。最后,通过算例对多自由度微振动时域波形复现进行了数值仿真,以给定的白噪声为输入,模拟对实际存在的系统非线性、测量误差等影响因素的控制效果。仿真结果验证了多自由度微振动时域波形复现控制方法的可行性及有效性,所得结论可以为研究多自由度微振动时域波形复现控制系统提供参考。     

Determination of an Estimation of Parameters of Motion of a Spacecraft on the Stage of Its Descent on the Basis of Integration of Inertial and Optoelectronic Navigation Systems

The problem of determining an estimation of current spacecraft motion parameters on the stage of its descent is solved on the basis of readings of an optoelectronic navigation system and additional information from the self-contained inertial navigation system at the most general assumptions on the nature of motion of the object and the statistical properties of the noise of the measuring devices.     

降落伞特性对伞舱系统运动稳定性的影响

建立了伞舱系统刚性连接和弹性连接时的数学模型,针对联盟号飞船回收系统进行了动力学仿真。分析了降落伞侧向力系数、吊带长度、降落伞和载荷质量比以及吊带性质对伞舱系统运动稳定性的影响,其结论可为伞舱回收系统的设计提供参考。     

多通道功率放大器中幅度和相位一致性影响分析

文章利用传输矩阵方法,建立了MPA分析模型,并通过引入幅度和相位随机性,结合各路放大器幅度和相位组合概率,对通道隔离度的影响进行了计算和分析。     

火箭推进剂液体晃动关机响应的数值仿真

本文采用VOF方法对火箭发动机关机阶段所引起的液体晃动进行了数值仿真，以氧化剂贮箱为例，得到了贮箱无阻尼环和带阻尼环时的晃动仿真图和液体质心变化曲线，检验了VOF方法处理碎波的能力。     

目标光学伪装效果评价方法分析

对现有伪装效果评价方法进行了简要分析,旨在形成更加科学合理的伪装效果评价方法。认为伪装效果主要表现在两个方面,一是目标本身暴露特征的降低或消除;二是目标与背景的融合程度。因此伪装效果评价也应从这两个方面进行分析。另外目标是否被发现,除了目标特征与背景特征是否一致等客观因素,还与观察判别人员的知识、经验以及分析判别能力等主观因素有关。     

Experimental investigation of the modes of operation of uncontrolled attitude motion of the Progress spacecraft

Results of in-flight tests of three modes of uncontrolled attitude motion of the Progress spacecraft are described. These proposed modes of experiments related to microgravity are as follows: (1) triaxial gravitational orientation, (2) gravitational orientation of the rotating satellite, and (3) spin-up in the plane of the orbit around the axis of the maximum moment of inertia. The tests were carried out from May 24 to June 1, 2004 onboard the spacecraft Progress M1-11. The actual motion of this spacecraft with respect to its center of mass, in the above-mentioned modes, was determined by telemetric information about an electric current tapped off from solar batteries. The values of the current obtained during a time interval of several hours were processed jointly using the least squares method by integration of the equations of the spacecraft’s attitude motion. The processing resulted in estimation of the initial conditions of motion and of the parameters of mathematical models used. For the obtained motions the quasi-static component of microaccelerations was computed at a point onboard, where installation of experimental equipment is possible.     

塑封微电路老炼研究综述

文章介绍了塑封微电路在高可靠性领域的应用,塑封微电路可靠性研究的现状,以及塑封微电路老炼研究在塑封微电路可靠性研究中的地位。具体分析了商用塑封器件老炼当前所面临的主要问题,其中重点介绍了随着器件集成度和工艺水平的提高,元器件漏电流的增加和元器件参数差异增大是老炼研究中不可忽略的因素。针对上述问题,指出了塑封微电路老炼过程热稳定研究的迫切性,尤其对我国高可靠应用领域,并介绍了国内外相关研究现状和我国在这一领域的差距。     

A study of evolution of spin-up mode of a satellite in the plane of its orbit

We investigate the mode of spinning up a low-orbit satellite in the plane of its orbit. In this mode the satellite rotates around its principal central axis of the minimum moment of inertia which executes small oscillations with respect to the normal to the orbit plane; the angular velocity of the rotation around this axis several times exceeds the mean orbital motion. Gravitational and restoring aerodynamic moments are taken into account in the satellite’s equations of motion. A small parameter characterizing deviation of the satellite from a dynamically symmetric shape is introduced into the equations. A two-dimensional integral surface of the equations of motion, describing quasi-steady-state rotations of the satellite close to cylindrical precession of the corresponding symmetrical satellite in a gravitational field, has been studied by the method of small parameter and numerically. Such quasi-steady-state rotations are suggested to be considered as unperturbed motions of the satellite in the spin-up mode. Investigation of the integral surface is reduced to numerical solution of a periodic boundary value problem of a certain auxiliary system of differential equations and to calculation of quasi-steady-state rotations by the two-cycle method. A possibility is demonstrated to construct quasi-steady rotations by way of minimization of a special quadratic functional.     

Analysis of evolution of multi-orbit perturbed trajectories of a spacecraft in a central field of attraction

Properties of differential equations of multi-orbit trajectory motion of a spacecraft are investigated analytically. The spacecraft moves under the action of small perturbations (in particular, low thrust) in the plane of a central Newtonian field of attraction. The conditions are specified for existence of a partial singular aperiodic solution, in the neighborhood of which the behavior of osculating elements changes sharply. In this case, phase variables (the angular position of the pericenter and the true anomaly) are found to undergo the sharpest changes. The exact superposition of solutions is suggested for the equations of motion transformed to the form of a quasi-linear, weakly non-stationary system: a partial singular aperiodic solution and fast solutions oscillating around it. Asymptotic representations are obtained for both components of the superposition. They are fairly exact in the region of smallness of perturbing terms at a long variation of the argument.     

The Solution of Some Problems of Optimizing the Processes of a Flexible Correction of Motion of Satellite Systems: I

The first of a series of problems of the optimization of correction of satellite systems, moving over near-circular orbits, is considered. The correction is accomplished by means of low-thrust engines and is supposed to be flexible, where only the parameters of the relative motion of satellites must be corrected. The problem has a large dimension, but is invariant with respect to renumbering of satellites. This allows us to decompose the problem, i.e., to find new variables, linearly dependent on old ones, in which the problem breaks down into a series of independent subproblems of low dimension. The decomposition is accomplished by means of the technique [1] based on the theory of linear representations of groups.     

状态方程对煤油液滴高压蒸发计算的影响

分别基于RK、SRK和PR等不同真实流体状态方程(EoS)建立了包含亚临界和超临界两种不同机制的瞬态液滴高压蒸发模型。针对我国新一代高压补燃液氧/煤油发动机，对煤油液滴在高压N 2 环境下的蒸发过程进行数值研究，重点分析了不同状态方程对N 2 -C 12 H 26 二元系统高压气液相平衡，及进一步对煤油液滴高压蒸发计算的影响。结果表明：对液滴蒸发速率影响最大的参数是液滴表面蒸气质量分数，而对该参数影响最大的则是所选取的状态方程。基于SRK和PR EoSs的高压气液相平衡及液滴高压蒸发计算结果均与试验数据符合较好，可正确描述液滴高压蒸发特性；而基于RK EoS的相平衡计算结果显著高估液滴表面蒸气质量分数和环境气体溶解度，并低估临界混合温度和偏摩尔相变热，进而在亚临界蒸发状态下高估蒸发速率，在超临界蒸发状态下低估蒸发速率。另外，基于RK EoS的计算中液滴发生跨临界转变所需的环境温度显著低于基于SRK和PR EoSs的。     

采用经纬仪测量航天相机视轴的方法分析

在卫星地面总装时,需要测量航天相机视轴之间以及相机视轴与其他敏感仪器或整星坐标系坐标轴之间的角度关系。文章以某线阵CCD相机的安装测量为例,介绍了使用经纬仪系统确定航天相机视轴的方法以及相机与相机之间、相机与整星坐标系坐标轴之间角度关系的测量。分析中对相机的光学系统进行了简化,重点介绍了测量方法的数学模型,并通过误差传递公式分析了测量精度,最后针对该测量方法的不足提出了改进措施。     

Application of the method of potentials in problems of fracture mechanics

The theory of generalized elastic potentials is used for solving the problem of a space with cracks of arbitrary shape. Two solutions are proposed. In the first case, the solution is represented by a double-layer potential and a functional equation for determination of the unknown density is constructed in which difficulties stipulated by high polarity of the integrand may be eliminated. The other method consists of an analysis of a space with a thin smooth cavity and the solution of corresponding singular integral equations.Methods to improve the convergence of successive approximations used in solution of the equations are described and some particular cases of three-dimensional solids are considered. A special function is introduced on the external surface of the solid, which allows consideration of a whole space with cracks having fictitious stresses on their edges; this solution has some bearing on the main problem and also provides an integral equation for the auxiliary function. Another approach consists of the elimination of cracks by introduction of corresponding potentials and solution of the auxiliary problem for a continuous solid with special boundary conditions.     

Evolution of motion of two viscoelastic planets in the field of forces of their mutual attraction

Translational-rotational motion of two viscoelastic planets in a gravitational force field is studied. The planets are modeled by homogeneous isotropic viscoelastic bodies. In their natural undeformed state each of the planets represents a sphere. We investigate a specific case when the planet’s centers of mass move in a fixed plane, the axis of rotation for each planet being directed along the normal to this plane. An equation describing the evolution of a slow angular variable (perihelion longitude) is derived. The observed displacement of the perihelion of Mercury is compared with the results obtained in the considered model problem about motion of two viscoelastic planets. Quite important is the fact that the planet of smaller mass (Mercury) moves not in a central Newtonian field of forces, but rather in the gravitational field of a rotating viscoelastic planet (Sun).     

The Solution of Some Problems of Optimizing the Processes of a Flexible Correction of Motion of Satellite Systems: II.

In a previous paper [1], as a result of group-theoretic decomposition, one of the problems of the optimization of the flexible correction process was reduced to a series of subproblems. In this paper, the analytical solutions to these subproblems are obtained by the sweep method. A series of other similar problems with different variants of flexibility is also considered; the decomposition of these problems is performed, and their analytical solutions are presented. It is shown for some numerical examples that flexible corrections require essentially lower fuel consumption than the rigid correction, where all parameters characterizing the absolute motion of a satellite system are corrected to their nominal values.     

Changes of properties of the materials of spacecraft solar arrays under the action of atomic oxygen

A procedure is developed for physical and chemical modeling and investigation of the weight, geometrical, and thermo-optical characteristics of polymer paneling materials of solar arrays and of the electric power of solar cells under the prolonged action of supersonic fluxes of atomic oxygen in orbit. The behavior of changes in the material characteristics as a function of the integral fluence of atomic oxygen is found. It is established that the electric power of solar cells is virtually invariable within the errors of measurements under irradiation by atomic oxygen flux with a fluence of no higher than 5 · 10²¹ cm^?2.