高温存储对Sn-Pb-Ni凸点界面金属间化合物生长的影响

倒装焊工艺由于具有信号处理速度快、封装密度高、可靠性高等特点，已广泛应用于高密度集成电路封装工艺中。高可靠倒装焊器件的互连焊点通常采用10Sn90Pb等高铅焊料，该焊料具有剪切强度高、可靠性高等优点，但其熔点高、回流工艺窗口窄等特性给封装工艺带来一定难度，此外该焊料在高温存储环境的可靠性有待进一步提高。本文采用Ni元素对10Sn90Pb焊料进行改性，研究高温存储下Sn-Pb-Ni体系凸点的力学性能以及金属间化合物（Intermetallic compound,IMC）的生长演变规律，以此评估Ni元素对10Sn90Pb凸点可靠性的影响。主要结果如下：适量添加Ni元素可以细化10Sn90Pb焊点界面处IMC晶粒，降低高温存储条件下的IMC生长速度，但在一定程度上会降低凸点的剪切强度。0.05%~0.1%含量的Ni元素添加对10Sn90Pb凸点综合性能提升较为显著。     

用亚稳态正电子素研究络合的瞬态反应（Ⅲ）

本文用自制的装有 BaF_2探头的高探测效率的正电子湮没寿命谱仪测量了在室温下正电子素 o-Ps 与 p-RPhG 及 m-RPhG(R=NO_2,Cl,H,CH_3,cH_3O)在20%(V/V)二氧六环水溶液中的络合形成速度常数。实验结果表明,这些o-Ps-M 络合形成速度常数 K 值均与作为配位体的 p-RPhG、m-RPhG 的碱性解离常数 K 的负对数 pK_2 呈线性函数。这表明上述瞬态络合反应满足线性自由能关系,由此可推断出上述络合反应的一些重要性质。     

rom 15 sel

with primary goat embryonic fibroblast showed no difference from traditional feederlayer-based culture method used in mouse and human. The putative primary EG colonies were multilayer clumps ofcompact cel     

密集编队气动耦合效应分析

简要介绍密集编队飞行时长机旋涡对僚机产生的气动耦合效应，以比奥特－萨瓦尔特定律为基础，初步分析由上洗及侧洗引起的升力、阻力和侧力变化，导出了编队稳定性导数的计算公式，计算及应用举例表明：模型化编队飞行时的气动耦合效应是有实际应用价值的。     

The Origin of Mercury

Mercury’s unusually high mean density has always been attributed to special circumstances that occurred during the formation of the planet or shortly thereafter, and due to the planet’s close proximity to the Sun. The nature of these special circumstances is still being debated and several scenarios, all proposed more than 20 years ago, have been suggested. In all scenarios, the high mean density is the result of severe fractionation occurring between silicates and iron. It is the origin of this fractionation that is at the centre of the debate: is it due to differences in condensation temperature and/or in material characteristics (e.g. density, strength)? Is it because of mantle evaporation due to the close proximity to the Sun? Or is it due to the blasting off of the mantle during a giant impact? In this paper we investigate, in some detail, the fractionation induced by a giant impact on a proto-Mercury having roughly chondritic elemental abundances. We have extended the previous work on this hypothesis in two significant directions. First, we have considerably increased the resolution of the simulation of the collision itself. Second, we have addressed the fate of the ejecta following the impact by computing the expected reaccretion timescale and comparing it to the removal timescale from gravitational interactions with other planets (essentially Venus) and the Poynting–Robertson effect. To compute the latter, we have determined the expected size distribution of the condensates formed during the cooling of the expanding vapor cloud generated by the impact. We find that, even though some ejected material will be reaccreted, the removal of the mantle of proto-Mercury following a giant impact can indeed lead to the required long-term fractionation between silicates and iron and therefore account for the anomalously high mean density of the planet. Detailed coupled dynamical–chemical modeling of this formation mechanism should be carried out in such a way as to allow explicit testing of the giant impact hypothesis by forthcoming space missions (e.g. MESSENGER and BepiColombo).     

无人机自由编队飞行的补偿模糊神经网络控制

为了克服当前提出的无人机编队飞行的不足，提出一种新的无人机编队飞行概念——自由编队飞行，制定了相关的避让规则，用补偿模糊神经网络进行训练，实现自由编队飞行的补偿模糊神经网络控制。仿真显示，编队飞行的飞机能按照规则自主改变航路进行避让，表明了该方法的有效性。     

逆合成孔径雷达信号处理方法研究进展

在简要评述国内外现有的逆合成孔径雷达（ISAR）信号处理的运动补偿和成象方法之后，介绍了南京航空航天大学ISAR课题组近年来在ISAR信号处理方法研究中取得的主要进展，包括基于多散射点定位观点的雷达成象观测模型，基于最大似然原理的同时运动补偿和成象方法，基于最大似然原理的多目标成象方法和基于时频分析的多目标成象方法，以及超分辩成象方法，文末指出了在ISAR信号处理方面有待进一步研究的问题。     

非线性条件下编队卫星周期性相对运动条件

利用编队卫星机械能守恒原理，提出了非线性条件下求解编队卫星周期性相对运动条件的新方法，给出了非线性周期相对运动的初始条件。编队卫星相对距离较近时，利用非线性周期运动条件，可修正Hill方程的初始条件，抑制编队卫星的长期漂移。编队卫星相对距离较大，非线性因素不可忽略时，利用非线性周期运动条件，可找到不需消耗任何燃料的周期性相对运动轨道。最后的数值仿真结果验证了该方法的正确性。     

主从式卫星编队相对轨道的自主确定

为实现主从式卫星编队飞行中心星与环绕星的自主定轨，采用微波雷达测量卫星间相对距离、距离速率、方位角和仰角。根据动力学方程给出了导航算法，并利用扩展卡尔曼滤波（EKF）提高微波雷达相对速度的测量精度。仿真结果表明，该导航算法对主从式卫星编队较有效，且能获得较佳的导航精度。     

机载SAR动目标成象研究

在分析机载合成孔径雷达运动目标成象特点的基础上，探讨了一种动目标成象的前置滤波方法，指出其存在的问题，提出了在前置滤波后进行参数估计的后处理形成，该方法基于时间－频率联合分析法，能得到运动目标的精细成象结果，计算机模拟验证了方法的有效性。