一万氧压机轴振动控制分析与实践

本文介绍了一种非常规的高速轴振动抑制方法，主要是用振源分析技术，通过确诊设备故障原因来分析影响轴振动的主要因素，调节机器的系统刚度，再通过理论计算修订安装参数，制定设备故障处理对策，在涟源钢铁集团有限公司一万氧压机组上的实践取得了相当满意的效果，很有推广价值。     

双功能陶瓷膜生物反应器处理污水的实验研究

针对目前膜生物反应器运行过程中膜易污染的问题，研制了一种新型的双功能陶瓷膜生物反应器．该生物反应器的主要特点是采用一种具有双重功能的陶瓷膜作为生物反应器的主要元件，陶瓷膜可以交替地进行曝气和过滤，将膜的在线反冲清洗和生物反应器的供氧曝气结合在一起．考察了不同运行条件下该反应器对COD、氨氮的去除效果．对陶瓷膜的充氧能力进行了实验，测得小孔陶瓷膜、大孔陶瓷膜、砂型曝气头的氧传递系数分别为：0．2315min-1，0．1587min-1，0．0991min-1．     

提高WP－11发动机起动高度的研究与实施

研究了ＷＰ－１１发动机点火高度从４０００ｍ提高到８０００ｍ的某些问题。详细讨论了点火高度的理论基础，并为ＷＰ－１１研制了一种可用的空中补氧点火装置，扩大了ＷＰ－１１发动机的使用范围。带着空中补氧点火装置的ＷＰ－１１发动机成功完成了高空舱试验和Ｙ－８飞机带飞实验。     

Oxygen Isotopes in the Solar System

The oxygen three-isotope system has major advantages over the two-isotope systems of hydrogen, carbon, and nitrogen because different fractionation laws govern intraplanetary and interplanetary processes. This permits discriminating between solar nebular processes and parent-body processes. Oxygen isotopes also serve as a sensitive natural tracer for meteorite classification. This revised version was published online in August 2006 with corrections to the Cover Date.     

Measurement of mass diffusion coefficients of O_2 in aviation fuel through digital holographic interferometry

The experimental apparatus to measure the mass diffusion coefficients of O2 in aviation fuel was constructed based on the digital holographic interferometry method. The theory of mass diffusion coefficient and interference image processing were introduced in detail. The accuracy of the experiment was verified by measuring the mass diffusion coefficient of 0.33 mol/L KCl in aqueous solution at 298.15 K. The mass diffusion coefficients of O_2 in RP3 and RP5 aviation fuels were measured at temperature from 278.15 K to 333.15 K, and the Arrhenius equation was employed to fit the experimental data. In terms of the Stokes-Einstein equation, the viscosities of these two aviation fuels were tested to estimate the correlation among mass diffusion coefficient, viscosity and temperature. A uniform polynomial calculation correlation was proposed to predict the mass diffusion coefficients of O_2 in both RP3 and RP5 aviation fuels, and its accuracy is considerably higher than that of the Stokes-Einstein equation.     

煤油/氧气预爆器爆震波特性研究

为了解决液态煤油旋转爆震发动机短距离快速起爆问题,进行了煤油/氧气预爆器方案设计。此方案包括双级轴向旋流和离心喷嘴匹配方案、半圆轴向垂直预爆管和圆管切向预爆管等设计,建立了液态煤油/氧气预爆器爆震波特性试验台。探讨了不同工作时序、当量油气比、预爆管结构等对预爆器爆震燃烧特性的影响。结果表明预爆器产生的爆震波压力达到4.0MPa以上,爆震波传播速度高于1300m/s,液态煤油/氧气最佳当量油气比存在于0.6-0.73之间一点。对比半圆轴向垂直预爆管和圆管切向预爆管,圆管模型爆震波压力明显高于半圆管模型,而传播速度却低于半圆管模型,圆管模型整体存在着前导激波的生成,而半圆管模型却在生成的爆震波后方有明显的压力波动现象     

气相色谱法定量分析氧气中气体杂质方法研究

为寻找一种能够有效检测氧气中微量气体杂质的方法,采用配有氢火焰离子化检测器的气相色谱仪分析氧气中的微量气体杂质,研究了分析氧气中CO、CO₂及C₂H₂等气体杂质的操作参数,确定了氧气中微量气体杂质的分析方法,验证了该方法的可行性,该分析方法各组份分离效果良好,各种杂质组份定量精确度较高。     

玉树地震前的电离层异常现象分析

分析了玉树地震前地基电离层探测临界频率、GPS TEC和卫星探测原位等离子体参量等多个参数的扰动变化信息, 研究了不同高度异常变化的时空关联性. 分析发现, 在地震前一天的4月13日, 多个电离层参量出现同步扰动异常, 电离层临界频率f₀F₂异常相对滑动中值增大40%, 异常空间上存在从震中东南向西南漂移的特性; GPS TEC异常增强15TECU (1TECU=1016m-2)左右, 分布于震中南部经度15°范围内, 且有明显的磁共轭效应; DEMETER观测的原位氧离子密度N_i(O+) 4月13日为1-4月中最强的一天, 异常分布偏向赤道区, 但仅局限在30°-50°左右的经度范围内. 综合三个参量的异常特征发现, 无论是空间的局地性还是时间上的密切关联均反映这次电离层扰动可能与玉树地震孕育有关. 结合其他观测信息, 进一步探讨了这次地震孕育过程的地震电离层耦合机理.      

Experimental study of a flush wall scramjet combustor equipped with strut/wall fuel injection

In this study a flush wall scramjet combustor is tested in a supersonic incoming air flow with the Mach number of 3 which is generated by an air vitiation heater producing the stagnation temperature of 1505 K. Using liquid kerosene as the fuel, the flame is stabilized by means of a centrally mounted O₂ pilot strut after being ignited by a plasma torch. During experimental measurements, the fuel is injected with a constant equivalence ratio of 0.8 according to specified strut/wall injection ratios, i.e., a portion of the fuel amount is injected from the strut while the rest is injected from the wall. The strut and wall injectors are arranged at the same axial position. The combustion performance and wall temperature gradients are evaluated with various fuel feeding ratios between the wall and the strut. Experimental results show, when the equivalence ratio is constant and the axial injection position is fixed, the combustion characteristics vary significantly with the strut/wall fuel feeding ratio, especially when this ratio is close to its lowest and highest limits. Among the four fuel feeding ratios examined, the strut only injection mode and the average distributed strut/wall injection mode show the best combustion performance. However, the strut/wall injection mode produces a smaller wall temperature gradient compared to the strut only injection mode, which is due to the significant film cooling effect caused by the wall injected liquid kerosene.     

氢氧涡流燃烧推力器设计方案仿真研究

涡流燃烧冷壁液体火箭发动机具有燃烧室侧壁温度低的特点,在高空或空间氢氧推力器应用方面很有优势,但是喷管喉部高温限制了它的应用.本文对以气氢气氧为推进剂的涡流燃烧冷壁发动机的设计方案进行了仿真研究,指出涡流工质的选择是燃烧室设计的首要问题,应根据燃烧反应总包方程,以体积流量较大的推进剂作为涡流工质,而并非一定是氧化剂.氢...