Direct position determination using single moving rotating linear array: Noncoherent and coherent processing

To improve the resolution and accuracy of Direct Position Determination (DPD), this paper investigates the problem of positioning multiple emitters directly with a single moving Rotating Linear Array (RLA). Firstly, the geometry of the RLA is formulated and analysed. According to its geometry, the intercepted noncoherent signals in multiple interception intervals are modeled. Correspondingly, the MUltiple SIgnal Classification (MUSIC) based noncoherent DPD approach is proposed. Secondly, the synchronous coherent pulse signals are individually considered and formulated. And the coherent DPD approach which aims for localizing this special type of signal is presented by stacking all array responses at different interception intervals. Besides, we also derive the constrained Cramér-Rao Lower Bound (CRLB) expression for both noncoherent and coherent DPD with RLA under the constraint that the altitudes of the emitters are known. At last, computer simulations are included to examine the performance of the proposed approach. The results demonstrate that the localization accuracy and resolution of DPD with single moving linear array can be significantly improved by the array rotation. In addition, coherent DPD with RLA further improves the resolution and increases the maximum emitter number that can be localized compared with the noncoherent DPD with RLA.     

谐振式加速度计自激振荡电路性能评价方法的研究

针对谐振式加速度计成品率不高、精度低等问题，以石英振梁加速度计为例，采用引进标准信号，将谐振电路作为“黑盒子”，对其开展独立的评价。通过评价电路的驱动电压幅值稳定性、移相稳定性、全温幅值/相位对称性等指标，与加速度计实际指标建立了一一对应的关系，为加速度计研制与性能提升提供了有效依据。实际运用表明，电路噪声性能、温度性能大幅提升，产品成品率从70%提高到了约90%。     

基于Hilbert-Huang变换的航天器发射段力学环境分析

文章基于Hilbert-Huang变换,对某载人航天器发射过程中整流罩分离期间测量的力学环境参数进行处理分析,利用HHT的基函数自适应性特点,得到振动时间历程信号的时频域Hilbert谱,准确识别出信号主频率及对应时间范围。此应用案例可为地面力学试验条件制定以及运载接口条件确定提供参考。     

正弦压力信号幅值测量无差算法研究

正弦压力校准常用比较法，通过比较标准压力传感器与被校压力传感器在同一正弦压力源中的响应完成被校传感器的幅值校准。对正弦压力信号幅值的测量算法进行了研究，提出了一种控制采样频率为标准激励信号频率整数倍的算法，可实现幅值的无差运算，理论推导和仿真实验表明，该算法能有效提高单频校准的准确度。     

Semi-supervised gear fault diagnosis using raw vibration signal based on deep learning

In aerospace industry, gears are the most common parts of a mechanical transmission system. Gear pitting faults could cause the transmission system to crash and give rise to safety disaster. It is always a challenging problem to diagnose the gear pitting condition directly through the raw signal of vibration. In this paper, a novel method named augmented deep sparse autoencoder (ADSAE) is proposed. The method can be used to diagnose the gear pitting fault with relatively few raw vibration signal data. This method is mainly based on the theory of pitting fault diagnosis and creatively combines with both data augmentation ideology and the deep sparse autoencoder algorithm for the fault diagnosis of gear wear. The effectiveness of the proposed method is validated by experiments of six types of gear pitting conditions. The results show that the ADSAE method can effectively increase the network generalization ability and robustness with very high accuracy. This method can effectively diagnose different gear pitting conditions and show the obvious trend according to the severity of gear wear faults. The results obtained by the ADSAE method proposed in this paper are compared with those obtained by other common deep learning methods. This paper provides an important insight into the field of gear fault diagnosis based on deep learning and has a potential practical application value.     

基于通用无线电外设的北斗信号仿真系统

研究了基于通用软件无线电外设(USRP)的北斗信号仿真系统。给出了北斗卫星电文的生成方式,使用Matlab读取星历信息并定义编码产生北斗卫星信号,并利用USRP实现北斗卫星电文的调制发射,利用接收机对该信号进行捕获接收,并对信号附加的多普勒频移进行仿真。最后通过接收机对仿真系统产生的信号进行接收验证。通过此仿真系统可更直观地研究北斗卫星信号,对研究北斗卫星导航系统具有一定的参考意义。     

空间目标监视雷达信号频率的优选准则

随着在轨微小卫星及空间碎片数量不断增加，为保证在轨卫星的运行安全，需要对微小目标进行有效跟踪探测及稳定编目。雷达作为近地空间目标监视的主用设备，在对厘米级小目标进行探测跟踪时，其工作频率是决定其能否可靠探测关键因素，高频有利于探测小目标，并可获得相对稳定的RCS，但高频信号的波束小、搜索能力较低，实现难度大，也使得成本过高。为适于实际工程应用，需从效费比出发，对频率进行优选。本文从目标RCS的角度提出一种空间目标监视雷达信号频率的优选准则，给出该准则下周长波长比ka的取值范围。为了更加清楚地说明该优选准则的应用，给出了直径5 cm和10 cm的目标在该准则下信号频率的取值范围，并与国外工作做了比较，证明该准则可行。     

一种模拟视频信号亮度对比度校准方法

本文针对模拟视频信号长距离传输后信号衰减和偏移的问题,提出一种软件自动校准的方法。通过分析源端发送的校准图样,调整视频AD芯片的增益和偏移参数,达到最佳的亮度和对比度校准效果。     

一种利用ILSP的同步DS-CDMA信号快速盲解扩算法

针对同步DS-CDMA信号的盲解扩问题，本文提出了一种基于迭代最小二乘投影算法(ILSP)的快速盲解扩算法。本算法首先通过对截获信号的协方差矩阵进行特征分解，估计出由各用户扩频序列张成的信号子空间，然后结合扩频码序列的有限符号集特性，利用ILSP算法消除由特征分解产生的酉矩阵模糊问题，得到扩频序列的精确估计，最后利用估计得到的扩频序列对截获信号解扩得到信息码序列，完成DS-CDMA信号的盲解扩。仿真结果表明本算法在低信噪比条件下具有良好的盲解扩性能，且相较传统算法本文提出算法大大降低了计算复杂度 。     

北斗导航接收机高增益相干积分算法

近年来,针对弱信号的高灵敏度接收机已逐渐成为国内外的研究热点。加长相干积分时间可以提高信噪比,从而跟踪到更弱的信号。但是,北斗导航接收机跟踪环路并不可以无限加长相干积分时间,相干积分时间的长短和功效还受到卫星导航电文比特跳变的限制。为了消除导航电文比特跳变对相干积分的影响,提出了一种改进的基于最大似然估计的北斗信号位同步方法,完成位同步后再利用先猜后检的方法便可以实现长相干积分。利用软件接收机进行编程设计,仿真结果表明：该长相干积分算法能够稳定可靠地实现对弱信号的跟踪,20ms相干积分环路信噪比约提升12dB,40ms相干积分环路信噪比约提升15dB,80ms相干积分环路信噪比约提升17dB,提高了北斗导航接收机的灵敏度。