基于模型的废气涡轮增压与发动机匹配

根据发动机工作过程模拟计算原理,采用GT-POWER软件对一级增压活塞式航空发动机建立涡轮增压器与发动机的仿真模型,并通过发动机实验数据验证了模型的准确性。按照高空环境条件对发动机提出的功率恢复的特殊要求,研究不同海拔高度下发动机与增压器的匹配规律,给出废气阀对增压系统的调节规律。分析结果表明,该仿真模型具有可信性且涡轮增压器的选型满足安全设计及匹配要求。     

Experimental investigations on the power extraction of a turbine driven by a pulse detonation combustor

In order to grasp the interaction mechanism between the pulse detonation combustor（PDC）and the turbine,the experimental work in this paper investigates the key factors on the power extraction of a turbocharger turbine driven by a PDC.A PDC consisting of an unvalved tube is integrated with a turbocharger turbine which has a nominal mass flow rate of 0.6 kg/s and50000 r/min.The PDC-turbine hybrid engine is operated on gasoline-air mixtures and runs for6＋min to achieve a thermal steady state,and then the engine performance is evaluated under different operating conditions.Results show that the momentum difference per unit area between the turbine inlet and outlet plays an important role in the power extraction,while the pressure peak of the detonation has little effect.The equivalence ratio of fuel and air mixture and the transition structure between PDC and turbine are also important to the power extraction of the turbine.The present work is promising as it suggests that the performance beneft of a PDC-turbine hybrid engine can be realized by increasing the momentum difference per unit area through the optimal design of transition section between the PDC and turbine.     

耦合进排气壳的增压器涡轮流动干扰及激振力弱化研究

为探究船用增压器涡轮在耦合进排气壳条件下的流动特性,采用SST湍流模型和FFT方法对某增压器轴流涡轮与进排气壳耦合的流场进行非定常数值模拟,重点分析排气壳非对称流场对涡轮动叶片压力的干扰特性和扰动来源,在此基础上提出基于导叶非对称布局的激振力弱化改型方案并进行了验证。结果表明：进气壳影响静叶前缘静压沿周向的分布,排气壳流场导致的非对称背压会给动叶表面造成低频的压力波动,约为3.6%的转子通过频率,在尾缘吸力面处该低频波动幅值大于动静叶排干涉导致的高频波动幅值;排气壳内部复杂的分离流动和涡系结构是产生上述流动干扰的主要原因。4种非对称布局方案都能在几乎不影响涡轮性能的前提下分散并弱化高频波动幅值;其中Case2尾缘高频幅值减小了98.6%,低频幅值减小了52.6%,而且涡轮效率还有略微提高,为最优布局。     

涡轮增压器转子动力分析

H1C型涡轮增压器存在着严重的转子碰磨故障。本课题对该增压器转子结构进行了强度动力分析,找出了产生故障的主要原因,为产品的排故、结构改进提供了理论依据。     

进、排气壳对全流道大膨胀比涡轮性能影响研究

进、排气系统对涡轮级的性能影响鲜有研究,本文针对增压器涡轮,采用数值方法对全流道大膨胀比跨声速涡轮与进、排气壳进行耦合计算,探索进、排气壳耦合对涡轮级的性能参数影响,结果显示进气壳主要影响静叶10%叶高与50%叶高前缘来流气流角周向分布,静叶排会减弱进气壳带来的参数周向不均匀性,排气壳主要影响动叶尾缘0°与180°周向位置总压与静压分布,进、排气壳耦合涡轮级总静效率比均匀边界涡轮级下降0.25%。