POD和DMD方法分析不同间隙压气机旋转不稳定性特性

对一台单级低速轴流压气机旋转不稳定性(RI)进行分析。在前期的旋转不稳定性特性、流场成因和不同间隙影响的研究基础上,进一步基于全通道数值模拟,采用两种流场降阶方法分析不同叶顶间隙条件下旋转不稳定性各阶模态对应的流场成分、模态能量占比和稳定性等特性。计算结果表明,前几阶模态能量占比大,对流场起主要贡献,并且稳定性相对较强。随着间隙的减小,旋转不稳定性的能量占比和稳定性下降,各阶的叶片转动成为流场的主要成分。      

速度脉动下分层旋流火焰动态传播结构提取

为了深刻理解分层旋流火焰的动态结构,开展了分层旋流火焰动态的模态分析和参数化研究。实验在BASIS （北京航空航天大学发展的具有台阶隔离段的独立分层旋流燃烧器）上开展,以甲烷为燃料预混燃烧,使用高速摄像捕捉了速度脉动下的CH*化学发光信号动态图像。利用传统的本征正交分解（POD）和重定向POD分析了火焰动态特性,并利用重定向POD提取了火焰动态中沿着轴向和径向的周期性传播结构,传播结构的频率与速度脉动频率保持一致,且轴向模态的传播结构最为明显。同时,研究了总当量比对重定向POD模态的影响,分析表明：总当量比增大时,重定向POD模态的拓扑结构会发生变化;重定向POD模态中出现了错位现象,这种现象与相平均图像中的火焰传播行为保持一致。重定向POD方法能够有效提取旋流火焰动态中的传播结构,为旋流火焰燃烧不稳定性的机理研究提供了一种分析工具。     

箱梁颤振过程中旋涡的演化规律及气动力的变化特性

利用粒子图像测速技术（PIV）观测了箱梁颤振过程中模型周围流场的旋涡特征,以模型扭转振动位移作为参考信号,采用相位平均的方法研究了旋涡规律性演化对模型周期性振动的驱动作用。风速较低时,箱梁振幅很小,其尾部风嘴附近上侧的旋涡尺度也很小,不易观测到,而下侧的旋涡尺度较大,其形状接近于圆形。当风速接近颤振临界风速时,箱梁振幅明显增大,并且模型尾部风嘴上侧的旋涡尺度也显著增大,达到与下侧旋涡尺度相匹配的程度,模型尾部风嘴上下侧旋涡的交替作用主导了结构振动直到模型振动发散。基于流固松耦合的计算策略,采用计算流体动力学（CFD）的数值方法模拟了箱梁颤振临界状态下的绕流特性,结合正交特征分解（POD）的方法研究了模型颤振时刻表面压力的空间分布特征,通过分析发现在颤振过程中箱梁表面波动压力的主控成分向迎风侧风嘴漂移。     

基于POD-BPNN的热启动策略及其在气动代理优化中的应用

传统气动优化设计需要大量CFD 分析,而代理优化（SBO）方法能够有效降低CFD 分析次数,但该方法并没有改变单个CFD 分析时间。提出一种基于本征正交分解-反向传播神经网络（POD-BPNN）模型的热启动策略,并应用于气动代理优化。使用POD-BPNN 模型对SBO 中的初始样本建立从几何设计变量到流场数据的预测模型...     

卫星星座整网轨道确定分析与仿真

编队飞行的卫星或卫星星座对轨道确定自主性和精度提出了较高要求。针对这个问题,通过建立星座的轨道动力学模型和星间观测的测量模型,将星座中的星间观测数据和地面观测数据融合起来,将待估的卫星轨道参数和部分动力学参数进行适当的分类,研究卫星星座整网轨道确定的新方法,并在理论上分析了整网定轨方法能提高定轨精度的原因;最后采用自主开发的卫星星座整网轨道确定软件进行了仿真计算。计算表明,该方法能有效地减少对地面站的依赖,并较大幅度提高定轨时卫星绝对位置和相对位置精度。
     

基于POD方法的跨声速轴流压气机转子叶顶间隙流场分析

以跨声速轴流压气机转子NASA Rotor 36为对象,研究了叶顶间隙流场的非定常流动特性。在数值模拟结果的基础上,采用本征正交分解(POD)方法获取POD模态和时间系数分布规律,进一步分析了近失速工况下叶顶间隙流场的流动特性。结果表明:在近失速工况下,叶顶间隙流场的主导频率为叶顶泄漏涡频率,约为0.6倍转子通过频率;能量较高的POD模态决定了叶顶泄漏涡的波动频率和幅值,低能量的高阶涡则影响流场的细微结构;同时发现,前5阶POD模态就可以很好地重构流场,这为低阶模型的应用提供了一定的理论指导。      

A high-fidelity design methodology using LES-based simulation and POD-based emulation: A case study of swirl injectors

Engineering design is undergoing a paradigm shift from design for performance to design for affordability, operability, and durability, seeking multi-objective optimization. To facilitate this transformation, significantly extended design freedom and knowledge must be available in the early design stages. This paper presents a high-fidelity framework for design and optimization of the liquid swirl injectors that are widely used in aerospace propulsion and power-generation systems. The framework assembles a set of techniques, including Design Of Experiment (DOE), high-fidelity Large Eddy Simulations (LES), machine learning, Proper Orthogonal Decomposition (POD)-based Kriging surrogate modeling (emulation), inverse problem optimization, and uncertainty quantification. LES-based simulations can reveal detailed spatiotemporal evolution of flow structures and flame dynamics in a high-fidelity manner, and identify important injector design parameters according to their effects on propellant mixing, flame stabilization, and thermal protection. For a given a space of design parameters, DOE determines the number of design points to perform LES-based simulations. POD-based emulations, trained by the LES database, can effectively explore the design space and deduce an optimal group of design parameters in a turn-around time that is reduced by three orders of magnitude. The accuracy of the emulated results is validated, and the uncertainty of prediction is quantified. The proposed design methodology is expected to profoundly extend the knowledge base and reduce the cost for initial design stages.     

Orbit determination for the GOCE satellite

Precise Orbit Determination (POD) for the Gravity field and steady-state Ocean Circulation Explorer (GOCE), the first core explorer mission by the European Space Agency (ESA), forms an integrated part of the so-called High-Level Processing Facility (HPF). Two POD chains have been set up referred to as quick-look Rapid and Precise Science Orbit determination or RSO and PSO, respectively. These chains make use of different software systems and have latencies of 1 day and 2 weeks, respectively, after tracking data availability. The RSO and PSO solutions have to meet a 3-dimensional (3D) position precision requirement of 50 cm and a few cm, respectively. The tracking data will be collected by the new Lagrange GPS receiver and the predicted characteristics of this receiver have been taken into account during the implementation phase of the two chains.     

LEO enhanced Global Navigation Satellite System (LeGNSS) for real-time precise positioning services

Global Navigation Satellite System (GNSS) has been widely used in many geosciences areas with its Positioning, Navigation and Timing (PNT) service. However, GNSS still has its own bottleneck, such as the long initialization period of Precise Point Positioning (PPP) without dense reference network. Recently, the concept of PNTRC (Positioning, Navigation, Timing, Remote sensing and Communication) has been put forward, where Low Earth Orbit (LEO) satellite constellations are recruited to fulfill diverse missions. In navigation aspect, a number of selected LEO satellites can be equipped with a transmitter to transmit similar navigation signals to ground users, so that they can serve as GNSS satellites but with much faster geometric change to enhance GNSS capability, which is named as LEO constellation enhanced GNSS (LeGNSS). As a result, the initialization time of PPP is expected to be shortened to the level of a few minutes or even seconds depending on the number of the LEO satellites involved. In this article, we simulate all the relevant data from June 8th to 14th, 2014 and investigate the feasibility of LeGNSS with the concentration on the key issues in the whole data processing for providing real-time PPP service based on a system configuration with fourteen satellites of BeiDou Navigation Satellite System (BDS), twenty-four satellites of the Global Positioning System (GPS), and sixty-six satellites of the Iridium satellite constellations. At the server-end, Precise Orbit Determination (POD) and Precise Clock Estimation (PCE) with various operational modes are investigated using simulated observations. It is found out that GNSS POD with partial LEO satellites is the most practical mode of LeGNSS operation. At the user-end, the Geometry Dilution Of Precision (GDOP) and Signal-In-Space Ranging Error (SISRE) are calculated and assessed for different positioning schemes in order to demonstrate the performance of LeGNSS. Centimeter level SISRE can be achieved for LeGNSS.     

风力机翼型动态失速的POD模型降阶方法

利用本征正交分解(Proper orthogonal decomposition,POD)原理设计了一种针对风力机翼型动态失速的时变过程的辨识方法。首先对周期俯仰运动的风力机翼型流场的动态失速过程进行数值模拟,然后用上述方法进行了有效的辨识并从中提取了关于动态失速过程的主要模态信息。在给定的误差阈值下,分别针对浅失速和深失速的情况,将该降阶模型的辨识结果与数值计算原始结果进行了对比并对误差进行了相应的分析。结果表明,该降阶模型方法能够以明显降低的计算量精确辨识翼型的浅失速情况;对深失速的辨识会由于湍流模型的精度影响有所降低。