电铸镍Wolter I型光学系统制造技术发展综述

摘要： 为满足未来脉冲星导航和空间天文观测任务对X射线望远镜的载荷需求，Wolter I光学系统的研制正逐渐成为新的研究热点，电铸镍方案是当前国内外X射线光学系统镜筒制造的主要技术方案.文章对电铸镍X射线光学系统制造工艺、国内外研制现状、未来应用需求进行了介绍和整理，梳理了电铸镍X射线光学系统研制遇到的关键技术和难点，提出了后续研究发展建议，以促进中国在 X射线脉冲星自主导航、空间探测领域的快速发展.     

Measuring the matter distribution within z = 0.2 cluster lenses with XMM-Newton

We present an analysis of seven clusters observed by XMM-Newton as part of our survey of 17 most X-ray luminous clusters of galaxies at z  0.2 selected for a comprehensive and unbiased study of the mass distribution in massive clusters. Using the public software FTOOLS and XMMSAS we have set up an automated pipeline to reduce the EPIC MOS and pn spectro-imaging data, optimized for extended sources analysis. We also developped a code to perform intensive spectral and imaging analysis particularly focussing on proper background estimate and removal. XMM-Newton deep spectro-imaging of these clusters allowed us to fit a standard β-model to their gas emission profiles as well as a standard MEKAL emission model to their extracted spectra, and test their inferred characteristics against already calibrated relations.     

Time-dependent thermal X-ray afterglows from GRBS

Time-dependent thermal X-ray spectra are calculated from physically plausible conditions around GRB. It is shown that account for time-dependent ionization processes strongly affects the observed spectra of hot rarefied plasma. These calculations may provide an alternative explanation to the observed X-ray lines of early GRBs afterglows (such as GRB 011211). Our technique will allow one to obtain independent constraints on the GRB collimation angle and on the clumpiness of circumstellar matter.     

Kilohertz quasi-periodic oscillations in SAX J1808.4–3658

I present a short overview of the behavior and properties of the two simultaneous kilohertz quasi-periodic oscillations (kHz QPOs) seen in the accreting millisecond X-ray pulsar SAX J1808.4–3658. I will focus on the behavior of the upper frequency QPO as a function of time and count rate as seen during the 2002 outburst of this source. I will also discuss briefly the correlated behavior of this QPO with QPOs at lower frequencies (several tens of hertz).     

Appearance of neutron stars in the state of subsonic propeller

The state of subsonic propeller is intermediate between the states of supersonic propeller and accretor in the evolutionary tracks of magnetized compact stars. The rotational rate of a star at this stage decelerates due to the interaction between its magnetosphere and the surrounding hot, quasi-static plasma envelope. The magnetospheric radius is smaller than the corotation radius and the boundary of the magnetosphere is stable with respect to interchange instabilities. The rate of the mass flux from the inner radius of the envelope to the stellar surface is limited by the rate of plasma diffusion into the magnetic field of the star. As a result, the subsonic propeller would appear as a low-luminosity accretion-powered pulsar with a soft X-ray spectrum.     

加速器切线照相技术研究

根据工作实践研究了固体发动机切线照相无损检测中黑度分布、散射线防治、象质计使用、检测概率计算、脱粘临界值确定等技术问题.     

大型空间模拟器总体检漏技术

论述了大型空间环境模拟器的总体检漏技术,针对大型模拟器的特点,从设计、加工到安装调试等过程介绍了检漏方法的选择,并着重介绍了氦质谱检漏法可检灵敏度的分析,对大型模拟器的检漏方案进行了全过程的设计.     

N2O-C2H2火焰原子吸收光谱法测定纯镍中硅含量

为简化纯镍中硅含量的测定过程,提高测量精度,研究了一种N2O-C2H2火焰原子吸收光谱法用于检测。介绍了方法的原理、工作参数和测定条件,并确定最佳工作条件,讨论了燃烧温度、共存离子等干扰因素的影响。实验结果表明,该法的灵敏度高、干扰小、选择性和重现性好,操作简单,分析周期短。其测定结果的相对标准偏差均小于1.0%,标准加入回收率大于97.0%(样本数n=6),可满足实验室仪器分析质量与控制的要求。     

画幅式层析成像光谱系统设计和实验研究

文章介绍一种无需时间或空间扫描的新型成像光谱仪—利用位相光栅作为分束器件的计算层析成像光谱仪 (CTIS)。重点介绍了各个系统的设计原则和位相光栅的设计 ,并给出了光栅的设计结果。详细介绍系统矩阵的实验定标方法和过程。叙述了自然光照明条件下真实物体组成的靶标的光谱成像实验 ,对目标实验采样的数据进行重构处理 ,给出了实验结果。     

几种新型的星载多光谱和成像光谱仪

近几年出现了几种新型的星载多光谱和成像光谱仪,例如:Landsat-7卫星的有效载荷增强型主题测绘仪+（ETM+）;EOS AM-1卫星的有效载荷多角度成像光谱仪（MISR）和先进空间热发射和反射辐射计（ASTER）;特殊探测器紫外成像光谱仪（SSUSI）。文章从结构、性能参数等方面综述了这几种星载成像光谱仪。