实验教学遥测系统中的一种码型反变换方法

在遥测系统中有许多种数字信号码型可以使用。在遥测解调分系统中 ,通常采用 NRZL 码作为输出码型 ,这就需要将系统输入的其它码型反变换为 NRZL 码。文中介绍一种在实验教学遥测系统中采用的利用匹配滤波、门限判决、采样、移位、异或的手段来实现码型反变换的方法。     

用于遥感卫星数传的新型波导阵列组合天线

从新的设计理念出发，提出一种新型的波导十字阵列组合辐射天线替代了赋形反射面天线，用于低轨遥感卫星的数传系统。文中论述了该天线的设计思路、设计过程，并列出了天线的主要性能。最后还简述了该天线在国内卫星上的应用及我国未来低轨遥感卫星数传天线的发展趋势。该天线已在我国多个卫星上成功应用。这种波导阵列组合天线结构紧凑、尺寸小，具有与国外通用的赋形反射面天线基本类似的性能，可达到星载数传天线的预定要求，而且为星载遥感器及其他载荷留出了更大的对地安装空间。     

应用等效系统法评价飞行品质

本文介绍等效系统方法在评价飞行品质中的应用,包括等效系统方法的原理、所采用的数学模型和进行等效系统拟配的数学方法。最后,介绍了具体拟配过程中应当考虑的若干问题。     

Matching suitable feature construction for SAR images based on evolutionary synthesis strategy

In the paper,a set of algorithms to construct synthetic aperture radar（SAR）matching suitable features are frstly proposed based on the evolutionary synthesis strategy.During the process,on the one hand,the indexes of primary matching suitable features（PMSFs）are designed based on the characteristics of image texture,SAR imaging and SAR matching algorithm,which is a process involving expertise;on the other hand,by designing a synthesized operation expression tree based on PMSFs,a much more flexible expression form of synthesized features is built,which greatly expands the construction space.Then,the genetic algorithm-based optimized searching process is employed to search the synthesized matching suitable feature（SMSF）with the highest effciency,largely improving the optimized searching effciency.In addition,the experimental results of the airborne synthetic aperture radar ortho-images of C-band and P-band show that the SMSFs gained via the algorithms can reflect the matching suitability of SAR images accurately and the matching probabilities of selected matching suitable areas of ortho-images could reach 99±0.5%.     

路网匹配定位方法研究

针对车载惯性导航设备由于其惯性器件随时间漂移产生误差导致系统定位精度逐渐变差的问题,提出了一种路网匹配定位方法以提高车载导航系统的综合定位精度,该方法基于视觉测量原理通过双目摄像装置采集道路周边环境特征进行匹配定位,介绍了匹配定位的基本原理和系统实现所需的关键技术,通过实际跑车测试,验证了该方法的合理性和可行性。     

机匣处理作用下高负荷轴流压气机转/静子匹配设计研究

为了探索机匣处理作用下转/静子的轴向匹配方法以进一步提高压气机级的失速裕度,研究了静子的叶型安装角及"弯"、"掠"规律对压气机性能的影响,针对机匣处理与优化静子的组合结构进行了非定常数值模拟,阐述了该结构的扩稳机理以及压气机新的失速机制。研究结果表明,在机匣处理作用下,静子成为压气机失速的触发因素,通过对静子叶型安装角及"弯"、"掠"规律的优化均可进一步提高压气机级的失速裕度,其中改变静子"弯"型对压气机级失速裕度的改善最大。组合应用机匣处理与尖部反弯根部正弯静子后,压气机效率基本不变,失速裕度提升了80.2%,较单独使用机匣处理提升30.9%。在该组合结构作用下,压气机的失速由静子触发,静子叶根吸力面在激波作用下发生附面层分离,且与轮毂表面附面层相互作用形成角区涡,接近失速边界时,静子叶根形成"前缘溢流,尾缘反流"现象,造成静子通道的大范围堵塞,诱发压气机失速。压气机级的扩稳应充分考虑机匣处理的影响,对静子进行优化设计。     

空间谱估计算法与通道失配

通道特性失配一直被认为是超分辨测向工程实现的一个重大障碍,文章证明了这是一个严重误解。当通道失配量值已知时,空间谱估计算法可以自行剔除其影响,因而具有良好的宽容性。对难以用一般方法测得的通道相位失配,提出了一种利用空间谱估计算法进行渐进无偏估计的方法。从而表明,空间谱估计算法在当前技术条件下就完全可以实现。     

变循环压缩系统涵道流动计算模型及模式转换倒流判据研究

为了研究双外涵变循环压缩系统的涵道流动匹配规律，发展了涵道流动的计算模型，对压缩系统模式转换过程中外涵道倒流问题的发生机理和影响因素进行了深入分析，总结了压缩系统的倒流判断准则，并基于简化计算模型和全三维计算结果对倒流判据进行了验证。研究结果表明，对于一定的压缩系统匹配状态，存在一个决定涵道匹配状态的临界核心机驱动风扇级(Core Driven Fan Stage, CDFS)总压比，当CDFS的实际工作压比高于临界压比时，压缩系统第二外涵道将发生倒流，反之则系统不倒流。复杂涵道系统内的流动损失和堵塞等特性对临界CDFS总压比有显著影响，为了准确判断压缩系统的匹配状态，需要对其进行精确模化。基于简化模型得到的压缩系统倒流临界线可以推广至全三维状态，本文提出的倒流判别准则具有较高的可靠性和可行性。     

Matching mechanism analysis on an adaptive cycle engine

As a novel aero-engine concept, adaptive cycle aero-engines (ACEs) are attracting wide attention in the international aviation industry due to their potential superior task adaptability along a wide flight regime. However, this superior task adaptability can only be demonstrated through proper combined engine control schedule design. It has resulted in an urgent need to inves-tigate the effect of each variable geometry modulation on engine performance and stability. Thus, the aim of this paper is to predict and discuss the effect of each variable geometry modulation on the matching relationship between engine components as well as the overall engine performance at dif-ferent operating modes, on the basis of a newly developed nonlinear component-based ACE perfor-mance model. Results show that at all four working modes, turning down the high pressure compressor variable stator vane, the low pressure turbine variable nozzle, the nozzle throat area, and turning up the core-driven fan stage variable stator vane, the high pressure turbine variable nozzle can increase the thrust at the expense of a higher high pressure turbine inlet total tempera-ture. However, the influences of these adjustments on the trends of various engine components' working points and working lines as well as the ratio of the rotation speed difference are different from each other. The above results provide valuable guidance and advice for engine combined con-trol schedule design.     

高负荷风扇级的特性实验与流场分析

为了探索高负荷风扇级的流场特性,积累这方面的设计经验,在压比和效率特性之外,还分别利用三孔针和总压耙对所实验风扇级的出口有关参数进行了测量。同时,为了辅助分析问题,借助了CFD研究了转静根部的匹配问题。对根部区域的实验和计算现象进行了重点讨论,并指出了不足和进一步改进的方向。