Deorbiter CubeSat mission design

This paper presents the mission design for a CubeSat-based active debris removal approach intended for transferring sizable debris objects from low-Earth orbit to a deorbit altitude of 100 km. The mission consists of a mothership spacecraft that carries and deploys several debris-removing nanosatellites, called Deorbiter CubeSats. Each Deorbiter is designed based on the utilization of an eight-unit CubeSat form factor and commercially-available components with significant flight heritage. The mothership spacecraft delivers Deorbiter CubeSats to the vicinity of a predetermined target debris, through performing a long-range rendezvous maneuver. Through a formation flying maneuver, the mothership then performs in-situ measurements of debris shape and orbital state. Upon release from the mothership, each Deorbiter CubeSat proceeds to performing a rendezvous and attachment maneuver with a debris object. Once attached to the debris, the CubeSat performs a detumbling maneuver, by which the residual angular momentum of the CubeSat-debris system is dumped using Deorbiter’s onboard reaction wheels. After stabilizing the attitude motion of the combined Deorbiter-debris system, the CubeSat proceeds to performing a deorbiting maneuver, i.e., reducing system’s altitude so much so that the bodies disintegrate and burn up due to atmospheric drag, typically at around 100 km above the Earth surface. The attitude and orbital maneuvers that are planned for the mission are described, both for the mothership and Deorbiter CubeSat. The performance of each spacecraft during their operations is investigated, using the actual performance specifications of the onboard components. The viability of the proposed debris removal approach is discussed in light of the results.     

电连接器接点焊接工艺研究

针对航天产品电连接器接点焊点与引线断裂失效问题,分析了焊接过程中助焊剂、焊料、焊接工具和防护套等对接点焊接质量的影响。结合实践经验,提出相关工作参数和材料的选取原则,确定了生产中焊接技术的质量控制点。     

俯斜墙背条件下朗肯与库伦土压力理论的研究

从挡土墙抗滑、抗倾覆安全系数和挡土墙的主动土压力两个角度，研究建立在朗肯土压力理论与库伦土压力理论基础上的不同主动土压力计算方法所带来的误差，认为在俯斜的挡土墙墙背条件下，应使用抗滑、抗倾覆安全系数来判断土压力计算方法是否合理。     

Astrophysics in 2006

The fastest pulsar and the slowest nova; the oldest galaxies and the youngest stars; the weirdest life forms and the commonest dwarfs; the highest energy particles and the lowest energy photons. These were some of the extremes of Astrophysics 2006. We attempt also to bring you updates on things of which there is currently only one (habitable planets, the Sun, and the Universe) and others of which there are always many, like meteors and molecules, black holes and binaries.     

推进剂功能组分作用机理研究——(Ⅱ)丁羟/铝粉体系

在丁羟 /铝粉组成的实验体系中 ,通过测定药浆流变性的变化 ,研究了一些功能组分在推进剂中的作用机理。结果表明 ,醇胺络合物TEA·BF3 是推进剂中铝粉的偶联剂 ,在其它功能组分存在的条件下 ,仍能竞争吸附于铝粉颗粒表面。实验发现 ,在Al/HTPB/IPDI体系药浆中 ,TEA·BF3 与MAPO间存在明显的协同效应 ,使药浆流变性能显著恶化。文中对其它一些功能组分在药浆中的作用机理也进行了分析探讨。     

球形铝粉对低燃速丁羟推进剂燃烧特性的影响

采用静态燃烧性能测试和实验发动机动态实验等方法。研究了球形铝粉替代非球形铝 后推进剂燃速特性的变化。研究发现，含球形铝粉推进剂的低压燃烧速显著降低，而燃速压强指数明显高于含非球形铝粉推进剂，讨论了球形和非球形铝粉对推进剂燃烧过程的影响，并初步解释了含球形铝粉推进剂低压燃速的下降原因。     

移动刚体激励下弹性梁的振动及其主动控制研究

本文研究了移动刚体激励下弹性梁的振动响应，以简支一弹怀支承梁为例进行了分析计算和实验研究。进而又提出了对弹性梁振动的最优控制方案，并进行了相应的仿真计算和实验研究。所有的实验结果同分析计算结果完全一致。     

二硝酰胺铵(ADN)球形化工艺研究

介绍了近年来国外关于二硝酰胺铵（ADN）球形化的工艺方法，重点讨论了中间介质、分散剂、表面活性剂和热稳定剂的作用及其选择方法。     

基于特征模型的挠性悬臂板控制

针对航天器上太阳帆板这种悬臂外伸薄板结构的挠性附件 ,存在环境扰动下所引起的振动 ,本文采用压电智能结构作为执行器对悬臂板进行主动振动控制。基于板系统的特征建模 ,并结合自适应控制对挠性板的主动控制进行了研究。通过仿真研究结果与应变律反馈控制比较 ,表明该方法的有效性     

直接力与气动力复合控制系统姿态稳定问题研究

大气层内直接力与气动力复合控制导弹具有响应快速、可用过载大等优点，可以拦截高速、高机动性目标。研究制导末端轨控直接力与气动力复合系统姿态稳定问题。首先分析了复合系统的特点和控制问题，建立了控制模型。然后应用扩张状态观测器观测对象模型内扰和外扰的实时作用量，进行反馈补偿，实现了动态线性化。最后设计了非平滑反馈控制律，从而实现了复合系统的姿态控制设计。仿真结果表明，系统具有良好的动态性能和稳态性能，控制器具有很强的鲁棒性。