Deorbiter CubeSat mission design

This paper presents the mission design for a CubeSat-based active debris removal approach intended for transferring sizable debris objects from low-Earth orbit to a deorbit altitude of 100 km. The mission consists of a mothership spacecraft that carries and deploys several debris-removing nanosatellites, called Deorbiter CubeSats. Each Deorbiter is designed based on the utilization of an eight-unit CubeSat form factor and commercially-available components with significant flight heritage. The mothership spacecraft delivers Deorbiter CubeSats to the vicinity of a predetermined target debris, through performing a long-range rendezvous maneuver. Through a formation flying maneuver, the mothership then performs in-situ measurements of debris shape and orbital state. Upon release from the mothership, each Deorbiter CubeSat proceeds to performing a rendezvous and attachment maneuver with a debris object. Once attached to the debris, the CubeSat performs a detumbling maneuver, by which the residual angular momentum of the CubeSat-debris system is dumped using Deorbiter’s onboard reaction wheels. After stabilizing the attitude motion of the combined Deorbiter-debris system, the CubeSat proceeds to performing a deorbiting maneuver, i.e., reducing system’s altitude so much so that the bodies disintegrate and burn up due to atmospheric drag, typically at around 100 km above the Earth surface. The attitude and orbital maneuvers that are planned for the mission are described, both for the mothership and Deorbiter CubeSat. The performance of each spacecraft during their operations is investigated, using the actual performance specifications of the onboard components. The viability of the proposed debris removal approach is discussed in light of the results.     

历经十年寿命试验的消旋天线机构轴承的可靠性分析

解决了一个计算可靠性问题的特例。分析了消旋天线机构轴承历经10年寿命试验的可靠性问题。并给出了轴承在不同可靠寿命要求下的可靠度(对应不同置信度)。     

俯斜墙背条件下朗肯与库伦土压力理论的研究

从挡土墙抗滑、抗倾覆安全系数和挡土墙的主动土压力两个角度，研究建立在朗肯土压力理论与库伦土压力理论基础上的不同主动土压力计算方法所带来的误差，认为在俯斜的挡土墙墙背条件下，应使用抗滑、抗倾覆安全系数来判断土压力计算方法是否合理。     

波导分支线定向耦合器计算方法

利用模匹配方法和网络理论分析计算了一种卫星天线系统中常用的波导分支线定向耦合器,计算结果与实验结果非常吻合。该方法为波导分支线定向耦合器提供一种有力的设计手段。它可直接用于设计Ku 波段通信卫星天线的波束形成网络,也可以用来设计各种耦合度的波导分支线定向耦合器。     

Astrophysics in 2006

The fastest pulsar and the slowest nova; the oldest galaxies and the youngest stars; the weirdest life forms and the commonest dwarfs; the highest energy particles and the lowest energy photons. These were some of the extremes of Astrophysics 2006. We attempt also to bring you updates on things of which there is currently only one (habitable planets, the Sun, and the Universe) and others of which there are always many, like meteors and molecules, black holes and binaries.     

利用偏馈振子调整测控雷达跟踪通道相移技术研究

提出一种调整雷达跟踪通道相移的方法 ,即在雷达天线主面上配置偏馈振子 ,利用偏馈振子做为校准源调整雷达跟踪和 /差通道间的相移 ,并对该方法的可行性、可靠性及稳定性进行了实验研究。     

基于在轨热环境的可展开天线反射面精度调整技术

随着宇航事业的发展,网状展开天线的尺寸越来越大,对形面精度要求越来越高(特别是高频段),在轨热环境与地面调整点的热环境差别大,必须采用基于在轨热环境的网面精度调整技术以满足反射面的精度要求。就在轨热环境下的辅助牵引面式网面精度调整技术的理论分析及调整方法进行了探讨,给出了计及在轨热环境的网面形状精度调整的基本理论公式及调整步骤,并对某样机进行了调整计算。计算结果表明,文中的分析、公式、方法是正确的,可行的。     

航天测控与数传接收综合信道构想

提出 S/ X航天测控与数传接收综合信道的概念 ,对综合信道进行了设计 ,重点说明综合信道中伪码测距的实现方法。讨论设计测控系统和应用系统综合信道的三种方案 ,并进行了比较分析。     

基于DPSA的几种全极化RWR前端升级方案

现代高技术战争条件下，电子战任务和电磁环境中威胁信号形式变得更加多样复杂，要求电子战支援系统（ESM）天线传感器能够接收和检测各种不同极化的威胁信号，即具有全极化接收能力。本文首先简要的介绍了一种性能优良的天线一双极化曲折天线（DPSA），然后提出了利用单个双级化曲折天线，将现有机载雷达告警接收机升级为全极化接收机系统的四种解决方案，其中重点介绍了基于极化组合/分解思想的第四种方案。     

引信天线参数设计中的概率方法

本文从引信的最一般概念出发给出了确定引信天线付瓣电平参数的概率解析法，论理严谨，经济适用，根据这种方法确定天线付瓣电平是建立在引信付瓣启动的小概率原理上的。适用于小型计算机计算。文中还给出了计算实例供设计参考。