Optimum parameter matching obtained by experiments for coring drilling into lunar simulant

This paper performs a series of ground experiments (on the Earth) to obtain optimum parameter matching for a future core drill on the Moon. Three common stages, I, II, III, are recognized with respect to the cut per revolution (CPR), which is defined as the ratio between the feeding speed and the rotating speed. The optimum matching between the feeding speed and the rotating speed for drills locates at the boundary position between Stage II and Stage III, where the coring rate saturates and the weight on the bit and the driving torque are still low. Further data analysis of the ground experiments reveals that the optimum matching signifies a proportional relation between the maximum conveying rate (MCR) by the groove of the auger and its rotating speed. The kinetic analysis in an ideal condition without gravity, the friction from the auger groove and the pressure at the bit confirm a similar proportion. The correlation between the proportions needs further study to determine whether the optimum matching obtained on the ground can be directly applied to future drills on the Moon.     

基于状态维修的APU涡轮热段性能评估研究

由于当前没有评估APU的涡轮效率较好的手段,以致对APU性能衰退的评估只停留在整体,对于运行控制和APU大修无法预先估计。本文阐述了一种通过观察和处理APU参数NPA的趋势和数值来判断APU涡轮效率的方法。以不同累计运行时间的APU在启动阶段参数的变化和实际案例论证了参数NPA可以表征涡轮效率的性能,通过研究NPA的发展趋势可预测APU的在翼运行状况。     

基于TLE的弹道系数计算方法及应用分析

针对仅使用两行要素（Two Line Element，TLE）作为数据源的应用需求，研究了基于TLE轨道衰减的弹道系数计算方法。介绍了一种常用的基于两组TLE的直接计算法，分析TLE选取间隔对结果精度的影响；提出了一种基于多组TLE的迭代计算方法，以降低异常TLE对计算结果的影响；从弹道系数计算效果、在再入预报中的应用等方面对这两种方法进行比较分析。结果表明，两种方法各有优劣，基于多组TLE的迭代计算法稳定性更高、受TLE精度的影响更小；由于数据区间更短，基于两组TLE的计算结果对短期轨道衰减特性反应得更准确，用于临近再入时的预报效果更好。     

温度场对飞船压降检漏的影响与优化测试方法

文章建立了基于FLUENT平台的飞船密封舱体压降检漏的模型;计算并研究了密封舱内气体温度随环境温度的变化规律和气体温度在稳态下的空间分布规律,试验、计算结果表明了计算模型与试验模型的一致性;温度场对压降检漏影响很大,越接近平均温度的测点修正压降线性越明显,计算漏率的误差越小。     

地面效应对尾涡消散的影响研究

采用大涡模拟方法可以分析和计算近地阶段尾涡消散和运动规律,但模型繁琐、计算复杂。本研究基于镜像涡方法建立了形式相对简单、计算迅速的近地尾涡运动模型和消散模型,计算结果与激光雷达测量数据和大涡模拟数据的偏差都不超过5％,满足动态尾涡间隔研究的需要。     

空中交通中尾流间隔的研究

分析了雷达尾流间隔标准的分类，通过尾流的形成机理和对后机影响的分析，建立了后机的危险遭遇模型和前机的尾流消散模型，给出了在确定的时间间隔下确定尾流危险遭遇概率的方法。     

Analysis of the orbit lifetime of CubeSats in low Earth orbits including periodic variation in drag due to attitude motion

It is estimated that more than 22,300 human-made objects are in orbit around the Earth, with a total mass above 8,400,000 kg. Around 89% of these objects are non-operational and without control, which makes them to be considered orbital debris. These numbers consider only objects with dimensions larger than 10 cm. Besides those numbers, there are also about 2000 operational satellites in orbit nowadays. The space debris represents a hazard to operational satellites and to the space operations. A major concern is that this number is growing, due to new launches and particles generated by collisions. Another important point is that the development of CubeSats has increased exponentially in the last years, increasing the number of objects in space, mainly in the Low Earth Orbits (LEO). Due to the short operational time, CubeSats boost the debris population. One of the requirements for space debris mitigation in LEO is the limitation of the orbital lifetime of the satellites, which needs to be lower than 25 years. However, there are space debris with longer estimated decay time. In LEÓs, the influence of the atmospheric drag is the main orbital perturbation, and is used in maneuvers to increment the losses in the satellite orbital energy, to locate satellites in constellations and to accelerate the decay.The goal of the present research is to study the influence of aerodynamic rotational maneuver in the CubeSat?s orbital lifetime. The rotational axis is orthogonal to the orbital plane of the CubeSat, which generates variations in the ballistic coefficient along the trajectory. The maneuver is proposed to accelerate the decay and to mitigate orbital debris generated by non-operational CubeSats. The panel method is selected to determine the drag coefficient as a function of the flow incident angle and the spinning rate. The pressure distribution is integrated from the satellite faces at hypersonic rarefied flow to calculate the drag coefficient. The mathematical model considers the gravitational potential of the Earth and the deceleration due to drag. To analyze the effects of the rotation during the decay, multiple trajectories were propagated, comparing the results obtained assuming a constant drag coefficient with trajectories where the drag coefficient changes periodically. The initial perigees selected were lower than 400 km of altitude with eccentricities ranging from 0.00 to 0.02. Six values for the angular velocity were applied in the maneuver. The technique of rotating the spacecraft is an interesting solution to increase the orbit decay of a CubeSat without implementing additional de-orbit devices. Significant changes in the decay time are presented due to the increase of the mean drag coefficient calculated by the panel method, when the maneuver is applied, reducing the orbital lifetime, however the results are independent of the angular velocity of the satellite.     

某型航空活塞发动机排气门积铅机理

针对某型航空活塞发动机在含铅汽油条件下因排气门积铅而出现严重的气缸压缩性衰减问题,通过对排气门上沉积物的微观形貌及成分分析,结合该型发动机的结构设计和实际运行环境分析这种排气门沉积物的形成机理.研究表明:空中慢车时排气门运行温度过低是导致污染物在排气门上沉积的根本原因,而空中慢车时的螺旋桨风车因素和该型发动机燃油系统设计特性是导致排气门运行温度过低的主要原因。据此提出将螺旋桨风车转速降低200 r/min和小功率调贫控制排气温度在427 ℃以上等提高气门运行温度的方案,经实际运行测试有效。