机载托架自动校准系统的设计与实现

为了解决机载托架传统校准方法精度低、耗时、费力等问题,设计了一种高精度、高效率并且操作简单的成品托架自动校准系统。该系统运用调平精度较高的"循环多次"最高点不动调平方法,建立高精度机载托架校准的静力学数学模型,运用VC与Matlab的COM接口编程技术开发机载托架自动校准系统,并建立良好的人机交互界面。试验结果表明,利用该方法对机载托架进行校准,无论是校准精度还是校准效率都较传统方法有很大提高。     

Evaluation of a regional real-time precise positioning system based on GPS/BeiDou observations in Australia

The performance of real-time (RT) precise positioning can be improved by utilizing observations from multiple Global Navigation Satellite Systems (GNSS) instead of one particular system. Since the end of 2012, BeiDou, independently established by China, began to provide operational services for users in the Asia-Pacific regions. In this study, a regional RT precise positioning system is developed to evaluate the performance of GPS/BeiDou observations in Australia in providing high precision positioning services for users. Fixing three hourly updated satellite orbits, RT correction messages are generated and broadcasted by processing RT observation/navigation data streams from the national network of GNSS Continuously Operating Reference Stations in Australia (AUSCORS) at the server side. At the user side, RT PPP is realized by processing RT data streams and the RT correction messages received. RT clock offsets, for which the accuracy reached 0.07 and 0.28?ns for GPS and BeiDou, respectively, can be determined. Based on these corrections, an accuracy of 12.2, 30.0 and 45.6?cm in the North, East and Up directions was achieved for the BeiDou-only solution after 30 min while the GPS-only solution reached 5.1, 15.3 and 15.5?cm for the same components at the same time. A further improvement of 43.7, 36.9 and 45.0 percent in the three directions, respectively, was achieved for the combined GPS/BeiDou solution. After the initialization process, the North, East and Up positioning accuracies were 5.2, 8.1 and 17.8?cm, respectively, for the BeiDou-only solution, while 1.5, 3.0, and 4.7?cm for the GPS-only solution. However, we only noticed a 20.9% improvement in the East direction was obtained for the GPS/BeiDou solution, while no improvements in the other directions were detected. It is expected that such improvements may become bigger with the increasing accuracy of the BeiDou-only solution.     

晶体管h参数微变等效电路的研究

晶体管h参数微变等效电路是电子技术中求解低频、小信号放大电路常用的分析方法.本文通过具体分析,将模拟放大电路进行了新的分类,并且明确而系统地给出运用微变等效电路求解各类模拟放大电路动态指标Av、ri和γ0公式、解题难点及规律.     

关于平面激波在凹两段楔面上的传播

众所周知,当一平面激波同任意形状的障碍物相互作用时,将产生十分复杂的波系,其中激波在曲面壁上的绕射和反射,将产生非定常波系。关于平面激波在凹圆柱壁面上的传播,我们可以用一连串、长度为无限小的楔面所构成的多边形来近似和代替凹圆柱面,因此分析和研究激波在两段楔面上反射和绕射的目的在于得出激波在圆柱壁面以及其它较复杂形状壁面上的传播规律。本文采用马赫-曾德干涉仪在激波管上进行光测模型实验。根据所拍摄的流场干涉图像,以分析其波系的演变过程及传播规律,得到有关流场的密度分布和压力分布,更为重要的是给出流场参数的定量结果。     

一种用于人体早期病变诊断的仪器

根据探针在人体穴位电流量的变化情况 ,具体分析了该仪器电路设计的工作原理、电路结构及具体的使用方法。     

平面形状误差分离方法的比较分析

就十种典型的精密平面形状误差测量－分离方法的权函数及其零点，作了分析比较。按形状误差谐波抑制最小准则，论证了五点式正交逐次三点法、九点式正交逐次三点法、复合三点法、不对称二维混合法和不对称四点法优于其他方法，不对称四点法则较为理想。     

浅析固定资产税金的计算

本文主要对固定资产税金计算中存在的问题入手，继而阐述固定资产各种交易中所涉及的税种以及税金的计算步骤，目的在于揭示固定资产具体税种税金计算的过程。     

航空运价的弹性分析

本文运用价格的弹性理论,分析中国民航三次调整运价的客票价弹性,客观地评价调整运价所产生的结果,从中得出中国航空运输存在的三类市场,及低弹性需求等结论,对今后合理调整运价具有重要的参考价值。     

弹道导弹中段机动突防研究

针对弹道导弹中段机动突防问题，在瞬时冲量假设下从理论上研究了速度增量大小、方向和机动时刻对零控脱靶量和落点偏差的影响。研究表明：速度增量大小和机动时刻给定时，零控脱靶量随速度增量方向不同存在极小值和极大值，速度增量方向垂直于视线方向时零控脱靶量接近最大，且最大值近似为待飞时间和速度增量大小的乘积；速度增量大小和机动时刻给定时，落点偏差随速度增量方向的不同存在极小值和极大值，极值点对应的速度增量方向可通过解析方法求解，落点偏差极大值与速度增量大小成正比，且机动时刻越晚，落点偏差极大值越小。该研究可为突防方案设计提供理论基础。