金属材料表面形貌对微观力学行为的影响

利用原子力显微镜对不同金属试件表面的三维形貌进行了定量表征和分析,并通过建立有限元模型研究了表面微观应力集中的分布及变化.结果表明:不同的表面处理方式、不同的材料性质对表面微观形貌的影响非常明显,而且在金属表面,微观应力的分布与其微观形貌紧密相关,当表面处理方式改变时,表征参数的全面改变是导致微应力集中变化的主要原因,在评价表面状态对疲劳性能的影响时,不能仅考虑表面粗糙度的改变,应当综合分析各表征参数的变化.     

多重分形谱在材料分析中的应用研究

基于多重分形谱的物理意义，通过图像分析与处理技术，利用Delphi语言设计了图像结构的多重分形谱的计算程序。通过程序中图像黑白二值化转化阈值的设定，实现了从材料组织结构形貌图像上提取其相应的概率测度和标度指数的功能，并计算了它们的多重分形谱。分析表明：在对材料的组织结构进行研究的问题中，多重分形谱是一种有意义的表征参数，能够从多分形角度对材料的组织结构开展定量化的分析与解释。     

基于格子Boltzmann方法表面形貌对微通道对流换热的影响

为推动微通道冷却技术在航空发动机中的应用,进一步提高航空发动机性能,本文通过扫描电子显微镜、粗糙度扫描仪等多方式扫描得到实际加工物体表面形貌,结合分形理论进行处理,得到真实、光滑、分形插值、康托尔集四类圆形截面管模型,管径100μm~400μm;采用格子Boltzmann方法进行数值模拟,首先通过与文献中实验结果的对比,验证了此方法的正确性,然后对空气在这四类圆形截面微通道中的对流换热特性进行了数值模拟,计算雷诺数Re范围80~640;结果发现：表面形貌是微通道中对流换热不可忽略的因素,相对粗糙度越大越有利于换热,真实扫描管的换热性能要比相同条件下光滑管高2.22%;分形理论可用于微通道表面形貌的构建,在相同迭代次数下,分形插值模型与真实扫描形貌换热性能相差0.03%,而康托尔集模型与真实扫描形貌换热性能相差1.88%,分形插值模型较康托尔集模型更能真实地反映实际形貌;微通道中,随着雷诺数的增加Nu将不再是常数,而是有增加的趋势。     

液体火箭发动机涡轮泵机械密封磨损机理研究

对比分析了机械密封静环端面原始表面和磨损表面形貌,得到了磨损形式和内外径磨损差异;仿真分析了密封端面接触应力及温度场,分析了转速、介质压力等条件对端面接触应力和温度场的影响;探明了端面接触应力和温度变化对磨损性能的影响,阐述了机械密封的磨损机理。     

承载传动误差最小的高重合度弧齿锥齿轮波动齿面设计

为改善航空弧齿锥齿轮的承载啮合性能,结合ease-off技术提出一种波动齿面设计方法以降低高重合度弧齿锥齿轮的承载传动误差。鉴于中凹型修形曲线（修形齿面的几何传动误差曲线）可极大地减小高重合度弧齿锥齿轮传动的承载传动误差波动幅值,创建一种与高重合度相适应的波动齿面修形模型;结合ease-off技术建立以降低承载传动误差波动幅值为目标的优化模型;通过优化得到具有良好啮合性能的高重合度弧齿锥齿轮。分析发现:优化后2阶传动误差设计弧齿锥齿轮传动的承载传动误差波动幅值降低了34.152%,而由波动齿面设计方法所得改进修形弧齿锥齿轮的承载传动误差进一步降低了61.492%,有效地改善了高重合度弧齿锥齿轮传动性能,为高性能弧齿锥齿轮齿面设计奠定理论基础。      

航空高强度碳纤维单向层合结构复合材料在切削过程中的各向异性行为研究

单向层合结构的高强度碳纤维增强树脂基复合材料已逐渐发展成为航空承力结构件的主要材料,相关的切削加工需求也越来越多。由于显著的各向异性,单向层合结构的碳纤维复合材料易在切削加工中形成缺陷,难切削加工性明显。采用直角自由切削试验的方法,得到了T700航空高强度碳纤维单向层合结构复合材料在不同纤维方向角下的切削力、切削比能、切削温度、切削加工表面。基于试验结果讨论了碳纤维单向层合材料在切削过程中力热行为的各向异性,得到了不同切削参数条件下的切削比能图谱以及碳纤维复合材料的切削热源和传导模型。通过扫描电子显微镜(Scanning electron microscope,SEM)分析了典型切削加工表面的特征,得到了不同纤维方向下的表面形成规律。     

分段拓扑修形齿轮的成形磨削与试验

基于成形磨削的几何原理和机床运动学原理,提出了斜齿轮副的一种分段拓扑修形方法.通过改变齿顶和齿根处渐开线的发生线长度实现齿廓分段修形;给砂轮附加一个抛物线+直线的径向进给运动实现齿向分段修形.推导出基于成形磨削过程中拓扑修形齿面的计算公式,对修形齿面的边界进行了划分,建立成形磨齿机各伺服轴的运动方程.根据齿面的数值模拟结果,在五轴数控(CNC)成形磨齿机上进行磨削加工与在机拓扑测量,验证了成形法实现齿面拓扑修形的可行性. 对给定转速和负载工况下的齿轮箱进行加载试验,齿轮箱振动能量级幅值下降0.008dB,噪声减小约2dB.研究表明分段拓扑修形有利于降低齿轮传动振动和噪声.      

Influence of lunar topography on simulated surface temperature

The surface temperature of the Moon is one of the essential parameters for the lunar exploration, especially to evaluate the Moon thermophysical features. The distribution of the temperature is heavily influenced by the Moon topography, which, however, is rarely studied in the state-of-art surface temperature models. Therefore, this paper takes the Moon topography into account to improve the surface temperature model, Racca model. The main parameters, such as slopes along the longitude and latitude directions, are estimated with the topography data from Chang’E-1 satellite and the Horn algorithm. Then the effective solar illumination model is then constructed with the slopes and the relative position to the subsolar point. Finally, the temperature distribution over the Moon surface is obtained with the effective illumination model and the improved Racca model. The results indicate that the distribution of the temperature is very sensitive to the fluctuation of the Moon surface. The change of the surface temperature is up to 150 K in some places compared to the result without considering the topography. In addition, the variation of the surface temperature increases with the distance from the subsolar point and the elevation, along both latitude and longitude directions. Furthermore, the simulated surface temperature coincides well with the brightness temperature in 37 GHz observed by the microwave sounder onboard Chang’E-2 satellite. The corresponded emissivity map not only eliminates the influence of the topography, but also hints the inherent properties of the lunar regolith just below the surface. Last but not the least, the distribution of the permanently shadowed regions (PSRs) in the lunar pole area is also evaluated with the simulated surface temperature result.     

Lagrangian analysis of satellite-derived currents: Application to the North Western Mediterranean coastal dynamics

Optimal interpolation methods for improving the reconstruction of coastal dynamics from along-track satellite altimetry measurements have been recently developed over the North Western Mediterranean Sea. Maps of satellite-derived geostrophic current anomalies are generated using these methods, and added to different mean circulation fields in order to obtained absolute geostrophic currents. The resulting fields are then compared to standard AVISO products, and their accuracies are assessed with Lagrangian diagnostics. The trajectories of virtual particle clusters are simulated with a Lagrangian code either with new current fields or with the AVISO ones. The simulated trajectories are then compared to 16 in situ drifter trajectories to evaluate the performance of the different velocity fields. The comparisons show that the new current fields lead to better results than the AVISO one, especially over the shallow continental shelf of the Gulf of Lion. However, despite the use of innovative strategies, some altimetry limitations still persist in the coastal domain, where small scale processes remain sub-sampled by conventional altimetry coverage but will benefit from technological development in the near future. Some of the limitations of the Lagrangian diagnostics presently used are also analyzed, but dedicated studies will be required for future further investigations.     

激光雷达系统在大尺寸地形扫描中的应用

为了获取模拟月面的三维地形数据,采用激光雷达系统进行专项试验场地形测量。文章分析了激光雷达系统的测量站点布局规划和位置参数设置对大尺寸地形扫描测量的影响,重点研究了激光雷达在景深条件限制下为实现最大扫描面积的有效扫描高度和扫描宽度设置。研究结果可为深空大范围扫描测量深入研究提供一定的参考。