干式变压器数据采集与控制系统的设计

介绍了一种基于V/F变换的高精度干式变压器数据采集与控制系统 ,采用LM2 3 1A/F变换芯片和89C5 2单片机实现工业现场测量对象的A/D转换。V/F变换器具有高精度 ,高线形度 ,且外围电路简单的特点。采用单片机直接与V/F变换器连接进行A/D转换 ,不需要额外的硬件电路 ,充分利用硬件资源 ,精心设计软件 ,系统分辨率可达 12位 ,转换精度可达 0 .0 2 %。当传感器与上位机距离较远时 ,可以采用RS -4 85接口或无线数据发送 /接收模块实现远距离的数据通信     

基于FTA方法对某型飞机直流电源系统故障分析

对某型飞机直流电源系统的“一个整流器故障”进行了分析 ,介绍了故障树分析的应用方法 ,并且对实际故障建立了故障树     

某起落架正常收／放系统失效原因分析

正确运用246雷达天线“正常或应急”液压操纵开关和液压马达壳体回油“正常或应急”开关的工作状态，关系到飞机液压操纵系统的安全性。若天线液压操纵开关和马达壳体回油开关配合不当，将引起飞机液压操纵系统失效。     

110 kV变压器中性点保护与零序保护优化配置

本文通过提出110KV变压器零序保护设计中存在的问题，阐述了变压器中性点与零序保护优化配置的设想与实施方案。     

ZVS双正激直/直变换器

提出了一种ZVS双正激直/直变换器拓扑，该拓扑不仅保留了双管正激变换器开关电压应力低、可靠性高的优点，而且较普通的交错并联双管正激变换器减少了两个箝位二极管。电路不仅实现了原边开关管的零电压开通和关断，而且副边整流二极管不存在电压尖峰。文章详细分析了该变换器的工作原理，给出了变换器的输出特性和实现ZVS开通的条件，并用一个2kW的原理样机进行了验证，最后给出实验结果。     

Motion synchronization in a dual redundant HA/EHA system by using a hybrid integrated intelligent control design

This paper presents an integrated fuzzy controller design approach to synchronize a dis-similar redundant actuation system of a hydraulic actuator (HA) and an electro-hydrostatic actu-ator (EHA) with system uncertainties and disturbances. The motion synchronous control system consists of a trajectory generator, an individual position controller for each actuator, and a fuzzy force tracking controller (FFTC) for both actuators. The trajectory generator provides the desired motion dynamics and designing parameters of the trajectory which are taken according to the dynamic characteristics of the EHA. The position controller consists of a feed-forward controller and a fuzzy position tracking controller (FPTC) and acts as a decoupled controller, improving posi-tion tracking performance with the help of the feed-forward controller and the FPTC. The FFTC acts as a coupled controller and takes into account the inherent coupling effect. The simulation results show that the proposed controller not only eliminates initial force fighting by synchronizing the two actuators, but also improves disturbance rejection performance.     

基于Visual Basic的互感器负荷箱测量仪校准系统的实现

为解决互感器负荷箱测量仪同相分量和正交分量的校准问题,在分析互感器负荷箱测量仪工作原理的基础上,设计了基于电子/电工组合式的互感器负荷箱测量仪校准装置,并简要说明装置电工部分、电子部分以及上位机软件的实现。经省级计量研究院验证结果表明,该装置校准结果符合0.2级要求,可作为标准装置解决1级互感器负荷箱测量仪量值溯源问题。     

A practical nonlinear robust control approach of electro-hydraulic load simulator

This paper studies a nonlinear robust control algorithm of the electro-hydraulic load simulator （EHLS）. The tracking performance of the EHLS is mainly limited by the actuator＇s motion disturbance, flow nonlinearity, and friction, etc. The developed controller is developed based on the nonlinear motion loading model. The problems of the actuator＇s disturbance and flow nonlinearity are considered. To address the friction problem, the friction model of the loading motor is identified experimentally. The friction disturbance is compensated using the obtained friction model. Therefore, this paper considers the main three factors comprehensively. The developed algorithm is easy to apply since the controller can be obtained just with one step back-stepping design. The stability of the developed algorithm is proven via Lyapunov analysis. Both co-simulation and experiments are performed to verify the effectiveness of this method.     

Review on signal-by-wire and power-by-wire actuation for more electric aircraft

The huge and rapid progress in electric drives offers new opportunities to improve the performances of aircraft at all levels:fuel burn,environmental footprint,safety,integration and production,serviceability,and maintainability.Actuation for safety-critical applications like flight-controls,landing gears,and even engines is one of the major consumers of non-propulsive power.Conventional actuation with centralized hydraulic power generation and distribution and control of power by throttling has been well established for decades,but offers a limited potential of evolution.In this context,electric drives become more and more attractive to remove the natural drawbacks of conventional actuation and to offer new opportunities for improving performance.This paper takes the stock,at both the signal and power levels,of the evolution of actuation for safety-critical applications in aerospace.It focuses on the recent advances and the remaining chal lenges to be taken toward full electrical actuation for commercial and military aircraft,helicopters,and launchers.It logically starts by emphasizing the specificity of safety-critical actuation for aero space.The following section addresses in details the evolution of aerospace actuation from mechanically-signaled and hydraulically-supplied to all electric,with special emphasis on research and development programs and on solutions entered into service.Finally,the last section reviews the challenges to be taken to generalize the use of all-electric actuators for future aircraft programs.     

人工神经元网络在变压器分接头实时控制中的应用

本文提出了一种利用人工神经元网络实时控制变压器分接头的新方法。研究结果表明该方法具有快速准确等优点，适应电力系统高度自动化的要求，并为变压器分接头实时控制开辟了一条新途径。