The SOHO CELIAS/SEM EUV database from SC23 minimum to the present

The SOHO Solar EUV Monitor has been in operation since December 1995 onboard the SOHO spacecraft. This instrument is a highly stable transmission grating solar extreme ultraviolet spectrometer. It has made nearly continuous full disk solar irradiance measurements both within an 8 nm bandpass centered at 30.4 nm and throughout the 0.1 to 50 nm solar flux region since launch. The 30.4 nm flux, the 0.1 to 50 nm flux and the extracted soft X-ray (0.1 to 5 nm) flux are presented and compared with the behavior of solar proxies.     

Multimodal characteristics of a piezoelectric lead zirconate titanate element impacted with iron particles having velocities above 20 km/s

The responses of a piezoelectric lead zirconate titanate (PZT) element to hypervelocity collisions were experimentally studied. In this study, the particles of masses ranging from 0.3 to 10 fg were made to collide with PZT at velocities between 20 and 96 km/s. The amplitude and the corresponding rise time of the single-pulse output signals that were produced in the piezoelectric PZT element were measured to determine the possible collision states. The results revealed an apparently multimodal output; three classes were assumed to be involved in the pulse formation mechanism. The amplitude and rise time were sensitive to the collision velocity. The multimodal behavior implied that the PZT-based cosmic dust detectors should be calibrated according to the class they belong to.     

Deriving the Absolute Reflectance of Lunar Surface Using SELENE (Kaguya) Multiband Imager Data

The absolute reflectance of the Moon has long been debated because it has been suggested (Hillier et al. in Icarus 151:205–225, 1999) that there is a large discrepancy between the absolute reflectance of the Moon derived from Earth-based telescopic data and that derived from remote-sensing data which are calibrated using laboratory-measured reflectance spectra of Apollo 16 bulk soil 62231. Here we derive the absolute reflectance of the lunar surface using spectral data newly acquired by SELENE (Kaguya) Multiband Imager and Spectral Profiler. The results indicate that the reflectance of the Apollo 16 standard site, which has been widely used as an optical standard in previous Earth-based telescopic and remote-sensing observations derived by Multiband Imager, is 47% at 415 nm and 67% to 76% at 750 to 1550 nm of the value for the Apollo 16 mature soil measured in an Earth-based laboratory. The data also suggest that roughly 60% of the difference is caused by the difference in soil composition and/or maturity between the 62231 sampling site and the Apollo 16 standard site and that the remaining 40% difference can be explained by the difference between the compaction states of the laboratory and the actual lunar surface. Consideration of the compaction states of the surface soil demonstrates its importance for understanding the spectral characteristics of the lunar surface. We also explain and evaluate data analysis procedures to derive reflectance from Multiband Imager data.     

Current status of X-ray spectrometer development in the SELENE project

The X-ray spectrometer (XRS) on the SELENE (SELenological and ENgineering Explorer) spacecraft, XRS, will observe fluorescent X-rays from the lunar surface. The energy of the fluorescent X-ray depends on the elements of which the lunar soil consists, therefore we can determine elemental composition of the upper most lunar surface. The XRS consists of three components: XRF-A, SOL-B, and SOL-C. XRF-A is the main sensor to observe X-rays from the lunar surface. SOL-B is direct monitor of Solar X-ray using Si-PIN photodiode. SOL-C is another Solar X-ray monitor but observes the X-rays from the standard sample attached on the base plate. This enables us to analyze by a comparative method similar to typical laboratory XRF methods. XRF-A and SOL-C adopt charge coupled device as an X-ray detector which depletion layer is deep enough to detect X-rays. The X-ray spectra were obtained by the flight model of XRS components, and all components has been worked well to analyze fluorescent X-rays. Currently, development of the hardware and software of the XRS has been finished and we are preparing for system integration test for the launch.     

Influence of curved thin-film device on deformation of a solar sail

A spinning solar sail IKAROS’s membrane is estimated to unexpectedly deform into an inverted pyramid shape due to thin-film devices with curvature, such as thin-film solar cells and steering devices on the membrane. It is important to investigate the deformation caused by the curved thin-film devices and predict the sail shape because the out-of-plane deformation greatly affects solar radiation pressure (SRP) and SRP torque. The purpose of this paper is to clarify the relationship between the global shape and orientation and position of curved thin-film devices and to evaluate SRP torque on the global shape using finite element analysis. The global shape is evaluated based on the out-of-plane displacement and the SRP torque. When the curved thin-film devices make the membrane shrink in the circumferential, diagonal, and radial direction, the sail deforms into a pyramid shape, an inverted pyramid one, and a saddle one, respectively. The saddle shape is more desirable for solar sails than the inverted pyramid shape and the pyramid one from the viewpoint of shape stability to SRP and control of SRP torque in the normal direction of the sail (windmill torque). The position of the thin-film device tends to increase the absolute value of windmill torque when it is biased circumferentially from the petal central axis. The suggested design principles for the arrangement of thin-film devices is that the curved thin-film devices should be directed so that the sail shrinks in the radial direction in order to deform the sail into a saddle shape with high shape stability, and the position of the thin-film devices should be biased in the circumferential direction paying attention to the absolute value of windmill torque to determine the direction of windmill torque.     

Solar power sail membrane prototype for OKEANOS mission

This paper reports on the manufacturing and evaluation of a solar power sail membrane prototype for the OKEANOS project. The in-house prototype was built by the Institute of Space and Astronautical Science, Japan Aerospace Exploration Agency. Mechanical and electrical evaluation tests were conducted. The membrane, thin-film solar cells, reflectivity control devices were good condition after the manufacturing and handling. The improvements in the manufacturing process and design were found. The manufacturing process and design were fundamentally established. After the prototype, improvement plans for the manufacturing process and design were tried. We have a prospect of manufacturing the flight model sail and continue to the development.     

Current status of the BepiColombo/MMO spacecraft design

This paper shows the current baseline of the conceptual design of the BepiColombo/MMO (mercury magnetospheric orbiter) spacecraft, which is conducted by the ISAS Mercury Exploration Working Group. The MMO is a spinning spacecraft of 200 kg mass whose spin axis is nearly perpendicular to the Mercury orbital plane. The current status of the overall MMO system and subsystems such as thermal control, communication, power, etc. are described. The latest status of the development of critical technologies for the MMO and the outline of the international cooperation between ESA and ISAS are also presented.     

An Analog Open-Loop Adaptive-Array Antenna System

A new open-loop adaptive-array system with excellent transient behavior is presented. The system is constructed of analog circuits and determines complex weights without using the feedback of the array output. The performance attainable with the system is described in detail. It is shown that the convergence rate of the system does not depend on a noise environment but is determined by the time constant of the low-pass filters included. Moreover, it is shown that although the steady-state performance is quite good when the interference sources differ widely in signal strength, the steady-state performance can be far below optimum when two or more interference sources are present at roughly equal power levels.     

Index: piggy-back satellite for aurora observation and technology demonstration

This paper describes outline of the piggy-back satellite “INDEX” for demonstration of advanced satellite technologies as well as for observation of fine structure of aurora. Aurora observation will be carried out by three cameras(MAC) with a monochromatic UV filter. Electron and ion spectrum analyzer (ESA/ISA) will measure the particle phenomena together with the aurora imaging. INDEX satellite will be launched in 2002 by Japanese H2-A. The satellite is mainly controlled by the high-speed, fault-tolerant on-board RICS processor (three-voting system of SH-3). The attitude control is a compact system of three-axis stabilization. Although the size of INDEX is small (50Kg class), several newly-developed technologies are applied to the satellite system, including silicon-on-insulator devices, variable emittance radiator, solar-concentrated paddles, lithium-ion battery, and GPS receiver with all-sky antenna-coverage.