Heat transfer at various methods of thermal protection in the systems of power-driven gas turbine plants (GTP)

The scheme variants of implementing the thermal protection against heat flows being generated by the body of a high-temperature stationary gas turbine engine (GTE) are presented. The scheme of the experimental bench with a working section is given. Methodical approaches to the heat transfer calculation at different variants of forced and natural convection organization and under various operating conditions are described. The generalized results of the experiments carried out using a heat curtain being generated by porous injection are presented.     

Power law distribution in statistics of failures in operation of spacecraft onboard equipment

The possibility of using the statistics of recurrence time for extreme events is studied in this paper having in mind the problems of control and prediction of failures in spacecraft operation. The information about failures onboard satellites of various types presented by the US National Geophysical Data Center was analyzed. It was found that the probability density of recurrence intervals followed a power law of the Pareto type with an index equal to 2.3. The obtained result is consistent both with the theory of normal catastrophes and with the principle of self-organization of criticality for metastable active heterogeneous environment. A practical consequence of the obtained result consists in the fact that predictions of these extreme events should not rely on traditional models with the second-order Pearson statistics. To make predictions, the models are necessary that take into account the power law distribution of recurrence intervals for failures on satellites. The failures should be considered in these models as extreme events connected with manifestation of the space environment factors.     

Comparison of the magnetic field before the subsolar magnetopause with the magnetic field in the solar wind before the bow shock

Crossings of the magnetopause near the subsolar point are analyzed using data of THEMIS mission. Variations of the magnetic field near magnetopause measured by one of THEMIS satellites are studied and compared with simultaneous measurements in the solar wind by another THEMIS satellite. The time delay of the solar wind arrival at the subsolar point of the magnetopause is taken into account. 30 and 90 s averaging of the magnetic field in the magnetosheath is produced. The results of averaging are compared with the results of measurements in the solar wind before the bow shock and foreshock. It is shown, that _Bx$B_x$ component of the magnetic field near magnetopause is near to zero, which supports the possibility to consider the magnetopause as the tangential discontinuity. Comparatively good correlation of _By$B_y$ component in the solar wind and near the magnetopause is observed. The correlation of _Bz$B_z$ component near the magnetopause and IMF is practically absent, the sign of the _Bz$B_z$ near the subsolar point does not coincide with the sign of IMF _Bz$B_z$ in ∼$\sim$30% cases.     

On ultra-high energy cosmic rays: Origin in AGN jets and transport in expanding universe

The cosmic ray source spectrum produced by AGN (active galactic nucleus) jets is calculated. A distinctive feature of these calculations is the account for the jet distribution on kinetic energy. The expected cosmic ray spectrum at the Earth is determined with the use of a simple numerical code which takes into account interactions of ultra-high energy protons and nuclei with the background radiation in an expanding universe.     

Geometrical model of creasing roll for manufacturing line of the wedge-shaped folded cores production

A manufacturing process for the wedge-shaped folded core of the M-crimp type is considered. Also presented is the parametrical simulation model of the cutting head; the model was constructed by using the Solid Works 2009 CADS software and is meant for automatic change of core geometry in cases when one or several initial parameters are varied.     

Biochemical,photosynthetic and productive parameters of Chinese cabbage grown under blue–red LED assembly designed for space agriculture

Currently light emitting diodes (LEDs) are considered to be most preferable source for space plant growth facilities. We performed a complex study of growth and photosynthesis in Chinese cabbage plants (Brassica chinensis L.) grown with continuous LED lighting based on red (650 nm) and blue (470 nm) LEDs with a red to blue photon ratio of 7:1. Plants grown with high-pressure sodium (HPS) lamps were used as a control. PPF levels used were about 100 μmol/(m² s) (PPF 100) and nearly 400 μmol/(m² s) (PPF 400). One group of plants was grown with PPF 100 and transferred to PPF 400 at the age of 12 days. Plants were studied at the age of 15 and 28 days (harvest age); some plants were left to naturally end their life cycle. We studied a number of parameters reflecting different stages of photosynthesis: photosynthetic pigment content; chlorophyll fluorescence parameters (photosystem II quantum yield, photochemical and non-photochemical chlorophyll fluorescence quenching); electron transport rate, proton gradient on thylakoid membranes (ΔpH), and photophosphorylation rate in isolated chloroplasts. We also tested parameters reflecting plant growth and productivity: shoot and root fresh and dry weight, sugar content and ascorbic acid content in shoots. Our results had shown that at PPF 100, plants grown with LEDs did not differ from control plants in shoot fresh weight, but showed substantial differences in photophosphorylation rate and sugar content. Differences observed in plants grown with PPF 100 become more pronounced in plants grown with PPF 400. Most parameters characterizing the plant photosynthetic performance, such as photosynthetic pigment content, electron transport rate, and ΔpH did not react strongly to light spectrum. Photophosphorylation rate differed strongly in plants grown with different spectrum and PPF level, but did not always reflect final plant yield. Results of the present work suggest that narrow-band LED lighting caused changes in Chinese cabbage plants on levels of the photosynthetic apparatus and the whole plant, concerning its development and adaptation to a varying PPF level.     

Spiral eddies in the Baltic,Black and Caspian seas as seen by satellite radar data

Despite spiral eddies were first seen on the sea surface more than 40 years ago, there is still a lot of uncertainty concerning these eddies. The present paper is aimed to provide the comprehensive results on the occurrence and statistics of small-scale eddies in the three inner seas (the Baltic, Black and Caspian) using satellite synthetic aperture radar (SAR) images. The dataset used includes over 2000 medium resolution Envisat ASAR and ERS-2 SAR images obtained in 2009–2010 in the different parts of the seas mentioned. As a result of the analysis performed ∼14,000 vortical structures were detected. 71% of them were visualized due to surfactant films (“black” eddies), while 29% due to wave/current interactions (“white” eddies). Practically all the eddies detected were cyclonically rotating. Their diameter was within 1–20 km. Characteristic size of the “black” eddies in all the basins was discovered to be less than that of the “white” eddies. Characteristic eddy size for the Baltic, Black and Caspian seas proved to be strictly proportional to the values of the baroclinic Rossby radius of deformation typical for these basins. The “black” eddies did not demonstrate a significant connection with the basin- and meso-scale surface circulation of the seas. Most of the “white” eddies detected were attributed to the zones with the most intense drift currents, i.e. those along the western boundaries and (in the Baltic Sea only) in the elongated parts of the basin.     

Influence of thermal protection on the temperature state of the screen and casing

This work is devoted to the experimental study of the method of thermal protection of the environment by shielding from the hot body of the high-temperature gas turbine engine on a model setup under conditions of free convection (bulk screen), and with the injection of air through a porous screen. The generalized dependences of thermal protection are obtained that permit the temperature of the screen and the casing under free convection and injection of air through a porous screen to be predicted.     

Surface protection by shielding from a hot source under conditions of free convection

In this paper, one way of heat protection from hot elements of the ground-based power-driven high-temperature gas turbine plant case have been experimentally studied by using shields placed between the case and outer skin under free convection in air gaps. Using the experimental model setup, experiments aimed at studying the temperature state of all its elements, namely, hot and cold walls, shield, and air gaps under free convection have been conducted. In the course of these experiments, the temperature of hot wall and air gap thicknesses were varied. The plots obtained by thermometering all walls are presented. As a result, generalization of the data obtained makes it possible to augment the data base and use it in choosing an optimal version of heat protection.