Ground experiments of Chang’e-5 lunar regolith penetrating radar

The Lunar Regolith Penetrating Radar (LRPR) is an Ultra-Wideband (UWB) array-based Ground penetrating radar (GPR) onboard the lander of Chang’e-5 (CE-5) mission. The primary scientific objectives of the LRPR are to probe the thickness and structure of lunar regolith of the landing site, and support the drilling and sampling process. In order to evaluate the performance of the LRPR, a series of ground experiments are performed using the LRPR prototype mounted on a CE-5 lander model. The performance of the LRPR is evaluated by comparing the experimental data with the simulated data. Data processing and imaging method are verified, and the interferences from the lander and other aspects are analyzed. The results of the ground experiments and simulation demonstrate that the LRPR is able to meet the design requirement of 2-m detection depth. They also indicate that the upper and lower interfaces of the stratified structure in the lunar regolith can be well distinguished by the LRPR when the dielectric constant difference is greater than 0.3, and the imaging effect of the location under the dense antennas is better than that of other positions. However, the identification capability of the LRPR to the independent blocky objects is relatively poor mainly due to the clutters caused by the lander, the sparsity of the antenna elements compared to the size of the basalt block, the limited aperture of the antenna array, and the tail of the transmitted waveform.     

Local Path Planning and Tracking Control of Vehicle Collision Avoidance System

Automotive collision avoidance technology can effectively avoid the accidents caused by dangerous traffic conditions or driver's manipulation errors.Moreover,it can promote the development of autonomous driving for intelligent vehicle in intelligent transportation.We present a collision avoidance system,which is composed of an evasive trajectory planner and a path following controller.Considering the stability of the vehicle in the conflict-free process,the evasive trajectory planner is designed by polynomial parametric method and optimized by genetic algorithm.The path following controller is proposed to make the car drive along the designed path by controlling the vehicle's lateral movement.Simulation results show that the vehicle with the proposed controller has good stability in the collision process,and it can ensure the vehicle driving in accordance with the planned trajectory at different speeds.The research results can provide a certain basis for the research and development of automotive collision avoidance technology.     

高校计算机网络实验改革探讨

在对亲身教学经验总结的基础上,笔者考察了众多高校网络实验室建设,揭示了目前高校网络实验的现状,提出了"自主创新"网络实验的概念,并制订了实际方案,拟定了实验方向.通过对"自主创新"网络的实验,取得了比较满意的效果.     

基于LMI的飞行控制系统H_2/H_∞状态反馈综合

针对同时存在模型参数变化和外界干扰这两种不确定性的飞机对象 ,本文采用基于LMI的H2 /H∞ 状态反馈综合方法进行控制器设计。仿真结果表明 ,闭环系统不仅对模型参数的变化具有鲁棒稳定性 ,而且对外界干扰具有很强的抑制能力 ,系统的动态性能得到了很大的改善     

摩擦作用下金属氧化反应的机理

某些金属在空气中摩擦时生成的润滑性氧化膜由于具有低摩擦系数、高耐磨性和自修复等特点越来越受到关注。摩擦过程中氧化膜的生成速度超过磨损速度是获得有效润滑的必要条件。摩擦氧化的动力学机制不同于热氧化，本文基于致密氧化膜的抛物线生长模型研究了摩擦状况下的氧化膜生长规律，使之尽早获得推广应用，具有广阔的市场前景     

概率安全评定方法的计算程序及其工程应用

考虑四种主要随机因素：载荷（作用应力）、缺陷尺寸、断裂韧性、流变应力等参数的不确定性，针对较为常见的焊接结构型式，如平板、球罐、圆柱形容器等结构上可能存在的不同缺陷类型，基于双判据失效准则，编制了较为通用的含缺陷焊接结构概率安全评定程序。对国产ＣＦ－６２钢制容积为１５３１ｍ３的球罐可能存在的缺陷进行了概率安全评定，通过对评定参数的敏感性分析，指出了影响其可靠性的关键因素。     

关于矩阵的定义及其运算的新思路

在当前流行的线性代数教科书中，大都直接给出矩阵及其运算的抽象定义，并没有给出这些定义的实际背景和具体应用，使学生理解和接受起来有很大的困难。本文通过具体实例引出矩阵及其运算的概念，这不但使学生很自然地理解矩阵及其运算的定义，而且也加强了学生解决实际问题的能力。     

超声速条件下亚毫米液滴的变形破碎模态

以超声速气流中液滴变形破碎行为为研究内容,对水平激波管中承受激波冲击的亚毫米水液滴(0.44~1.09 mm)变形破碎过程进行了观测,实验激波马赫数范围为1.07~2.11。利用纹影法,结合高分辨率高速相机对不同破碎模态下液滴的变形破碎特征进行了记录,得到了袋状、多模态、剪切和爆炸式等破碎模式下的液滴纹影图像,分析了液滴运动参数的时空关系。得出了液滴变形阶段,液滴无量纲横向变形宽度以及液滴无量纲迎风面位移随无量纲时间的变化发展规律,并且得出在液滴初始直径相同时,不同液滴破碎模式的无量纲最大横向变形宽度的变化,其中袋状、多模态、剪切破碎模式的无量纲横向最大变形宽度均在1.15~1.61范围内变化,爆炸式破碎模式的无量纲横向最大变形宽度均在0.21~0.68范围内变化。     

Al/Ni含能多层膜在Al2O3陶瓷/不锈钢焊接中的应用

采用磁控溅射设备,生长AuSn合金做焊料层、Al/Ni含能多层膜做热量提供层,实现了不锈钢和Al_2O_3间的异质材料自蔓延高温扩散焊。利用SEM、XRD和DSC等测试手段表征AuSn合金和Al/Ni含能多层膜的微观形貌、相成分和放热量;用万能试验机测试焊接接头的力学性能。结果表明,AuSn合金的质量比基本达到80∶20,而多层膜的层状结构清晰,反应热达到1 239 J/g。焊接实验结果表明,仅使用AuSn焊料时,剪切强度仅为46 MPa,在增加Al/Ni含能多层膜后,其剪切强度可达90 MPa,强度提高了约一倍。焊接接头的界面显微形貌和相结构研究表明,剪切强度的增强主要是Al/Ni多层膜提供了额外能量使得界面处的反应剧烈,陶瓷金属化层与中间层的反应加剧,形成了新的反应生成物。     

针对相控阵雷达的自适应干扰样式调度准则研究

自适应干扰样式调度策略是实现认知电子战的关键环节.针对目前自适应干扰样式调度准则中未考虑相控阵雷达自身工作调度模板的问题,在现有雷达侦察参数的基础上,增加对脉冲幅度和脉冲数量2个参数的侦察以提高对雷达工作状态变化的判断准确率,然后对雷达工作调度模板进行侦收和分析,从而建立基于相控阵雷达自身工作调度模板的自适应干扰样式调...