Acceleration of the High Speed Solar Wind in Coronal Holes

We outline a theory for the origin and acceleration of the fast solar wind as a consequence of network microflares releasing a spectrum of high frequency Alfvén waves which heat (by cyclotron absorption) the corona close to the Sun. The significant features of our model of the fast wind are that the acceleration is rapid with the sonic point at around two solar radii, the proton temperatures are high (~ 5 million degrees) and the minor ions are correspondingly hotter, roughly in proportion to their mass. Moreover we argue that since the energy flux needed to power the quiet corona in closed field regions is about the same as that needed to drive the fast solar wind, and also because at deeper levels (< 2 × 10⁵ K) there is no great difference in the properties of supergranules and network in closed and open field regions, the heating process (i.e., dissipation of high frequency waves) must be the same in both cases. This revised version was published online in June 2006 with corrections to the Cover Date.     

Multi-rover navigation on the lunar surface

The paper presents a method of determination an accurate position of a target (rover, immobile sensor, astronaut) on surface of the Moon or other celestial body devoid of navigation infrastructure (like Global Positioning System), by using a group of self-calibrating rovers, which serves as mobile reference points. The rovers are equipped with low-precision clocks synchronized by external broadcasting signal, to measure the moments of receiving radio signals sent by localized target. Based on the registered times, distances between transmitter and receivers installed on beacons are calculated. Each rover determines and corrects its own absolute position and orientation by using odometry navigation and measurements of relative distances and angles to other mobile reference points. Accuracy of navigation has been improved by the use of a calibration algorithm based on the extended Kalman filter, which uses internal encoder readings as inputs and relative measurements of distances and orientations between beacons as feedback information. The key idea in obtaining reliable values of absolute position and orientation of beacons is to first calibrate one of the rovers, using the remaining ones as reference points and then allow the whole group to move together and calibrate all the rovers in-motion. We consider a number of cases, in which basic modeling parameters such as terrain roughness, formation size and shape as well as availability of distance and angle measurements are varied.     

Reducing variability in short term orbital lifetime prediction

Within the last year three major re-entries occurred. The satellites UARS, ROSAT and Phobos-Grunt entered Earth’s atmosphere with fragments reaching the surface. Due to a number of uncertainties in propagating an object’s trajectory the exact place and time of a satellite’s re-entry is hard to determine. Major influences when predicting the re-entry time are the changing precision of the available orbital data, the satellite’s ballistic coefficient, the activity of the sun which influences the Earth’s atmosphere and the underlying quality of the atmospheric model. In this paper a method is presented which can reduce the variability in short-term orbital lifetime prediction induced by fluctuating orbital data accuracies. A re-entry campaign is used as a reference for this purpose. For a window of a few weeks before the re-entry the position data of a synthetic object is disturbed considering different degrees of orbital data errors. As a result different predictions will exist for the generated position data of a given day. Using a regression algorithm on the available data an average position is obtained, which is then used for the orbital lifetime prediction. The effect of this measure is a more consistent prediction of the orbital lifetime. The paper concludes with the comparison of the generated re-entry windows in various test cases for the original and the averaged data.     

A shadow function model based on perspective projection and atmospheric effect for satellites in eclipse

Accurate Solar Radiation Pressure (SRP) modelling is critical for correctly describing the dynamics of satellites. A shadow function is a unitless quantity varying between 0 and 1 to scale the solar radiation flux at a satellite’s location during eclipses. Errors in modelling shadow function lead to inaccuracy in SRP that degrades the orbit quality. Shadow function modelling requires solutions to a geometrical problem (Earth’s oblateness) and a physical problem (atmospheric effects). This study presents a new shadow function model (PPM_atm) which uses a perspective projection based approach to solve the geometrical problem rigorously and a linear function to describe the reduction of solar radiation flux due to atmospheric effects. GRACE (Gravity Recovery And Climate Experiment) satellites carry accelerometers that record variations of non-conservative forces, which reveal the variations of shadow function during eclipses. In this study, the PPM_atm is validated using accelerometer observations of the GRACE-A satellite. Test results show that the PPM_atm is closer to the variations in accelerometer observations than the widely used SECM (Spherical Earth Conical Model). Taking the accelerometer observations derived shadow function as the “truth”, the relative error in PPM_atm is ?0.79% while the SECM 11.07%. The influence of the PPM_atm is also shown in orbit prediction for Galileo satellites. Compared with the SECM, the PPM_atm can reduce the radial orbit error RMS by 5.6?cm over a 7-day prediction. The impacts of the errors in shadow function modelling on the orbit remain to be systematic and should be mitigated in long-term orbit prediction.     

Mupus – A Thermal and Mechanical Properties Probe for the Rosetta Lander Philae

MUPUS, the multi purpose sensor package onboard the Rosetta lander Philae, will measure the energy balance and the physical parameters in the near-surface layers – up to about 30 cm depth- of the nucleus of Rosetta’s target comet Churyumov-Gerasimenko. Moreover it will monitor changes in these parameters over time as the comet approaches the sun. Among the parameters studied are the density, the porosity, cohesion, the thermal diffusivity and conductivity, and temperature. The data should increase our knowledge of how comets work, and how the coma gases form. The data may also be used to constrain the microstructure of the nucleus material. Changes with time of physical properties will reveal timescales and possibly the nature of processes that modify the material close to the surface. Thereby, the data will indicate how pristine cometary matter sampled and analysed by other experiments on Philae really is.     

Recent results on the parameters of the interstellar helium from the ULYSSES/GAS experiment

Velocity and direction of the flow of the interstellar helium and its temperature and density have been determined from the measurements of the ULYSSES/GAS experiment for two different epochs: during the in-ecliptic path of ULYSSES, representing solar maximum conditions, and during the south to the north pole transition (11/94-6/95), close to the solar minimum conditions. Within the improved error bars the values are consistent with results published earlier.The determination of the density n of the interstellar helium at the heliospheric boundary from observations in the inner solar system requires knowledge about the loss processes experienced by the particles on their way to the observer. The simultaneous observation of the helium particles arriving on direct and indirect orbits at the observer provides a tool to directly determine the effects of the loss processes assumed to be predominantly photoionization and — for particles travelling close to the Sun — electron impact ionization by high-energy solar wind electrons.Such observations were obtained with the ULYSSES/GAS instrument in February 1995, before the spaceprobe passed its perihelion. From these measurements values for the loss rates and the interstellar density could be derived. Assuming photoionization to be the only loss process reasonable fits to the observations were obtained for an ionization rate = 1.1 · 10^–7 s^–1 and a density n 1.7 · 10^–2 cm^–3. Including, in addition, electron impact ionization, a photoionization = 0.6 · 10^–7 s^–1 was sufficient to fit both observations, resulting in a density n 1.4 · 10^–2 cm^–3.On leave from Space Research Centre, Warsaw, Poland.     

Fast solar radiation pressure modelling with ray tracing and multiple reflections

Physics based SRP (Solar Radiation Pressure) models using ray tracing methods are powerful tools when modelling the forces on complex real world space vehicles. Currently high resolution (1?mm) ray tracing with secondary intersections is done on high performance computers at UCL (University College London). This study introduces the BVH (Bounding Volume Hierarchy) into the ray tracing approach for physics based SRP modelling and makes it possible to run high resolution analysis on personal computers. The ray tracer is both general and efficient enough to cope with the complex shape of satellites and multiple reflections (three or more, with no upper limit). In this study, the traditional ray tracing technique is introduced in the first place and then the BVH is integrated into the ray tracing. Four aspects of the ray tracer were tested for investigating the performance including runtime, accuracy, the effects of multiple reflections and the effects of pixel array resolution.Test results in runtime on GPS IIR and Galileo IOV (In Orbit Validation) satellites show that the BVH can make the force model computation 30–50 times faster. The ray tracer has an absolute accuracy of several nanonewtons by comparing the test results for spheres and planes with the analytical computations. The multiple reflection effects are investigated both in the intersection number and acceleration on GPS IIR, Galileo IOV and Sentinel-1 spacecraft. Considering the number of intersections, the 3rd reflection can capture $99.12\%\text{,}99.14\%$, and $91.34\%$ of the total reflections for GPS IIR, Galileo IOV satellite bus and the Sentinel-1 spacecraft respectively. In terms of the multiple reflection effects on the acceleration, the secondary reflection effect for Galileo IOV satellite and Sentinel-1 can reach 0.2?$\text{nm}/{\text{s}}^2$ and 0.4?$\text{nm}/{\text{s}}^2$ respectively. The error percentage in the accelerations magnitude results show that the 3rd reflection should be considered in order to make it less than $0.035\%$. The pixel array resolution tests show that the dimensions of the components have to be considered when choosing the spacing of the pixel in order not to miss some components of the satellite in ray tracing. This paper presents the first systematic and quantitative study of the secondary and higher order intersection effects. It shows conclusively the effect is non-negligible for certain classes of misson.