Scientific objectives and payloads of Tianwen-1, China’s first Mars exploration mission

This paper describes the scientific objectives and payloads of Tianwen-1, China’s first exploration mission to Mars. An orbiter, carrying a lander and a rover, lifted-off in July 2020 for a journey to Mars where it should arrive in February 2021. A suite of 13 scientific payloads, for in-situ and remote sensing, autonomously commanded by integrated payload controllers and mounted on the orbiter and the rover will study the magnetosphere and ionosphere of Mars and the relation with the solar wind, the atmosphere, surface and subsurface of the planet, looking at the topography, composition and structure and in particular for subsurface ice. The mission will also investigate Mars climate history. It is expected that Tianwen-1 will contribute significantly to advance our scientific knowledge of Mars.     

Early analysis of precise orbit and clock offset determination for the satellites of the global BeiDou-3 system

Eight new-generation BeiDou satellites (BeiDou-3) have been launched into Medium Earth Orbit (MEO), allowing for global coverage since March 2018, and they are equipped with new hydrogen atomic clocks and updated rubidium clocks. Firstly, we analyzed the signals for the carrier-to-noise-density ratio (C/N0) and pseudorange multipath (MP) by using international GNSS (Global Navigation Satellite System) Monitoring and Assessment System (iGMAS) station data, and found that B1C has a lower C/N0, and B2a has the same level of C/N0 as the B1I and B3I signals. For pseudorange multipath, compared with the BeiDou-2 satellites, the obvious systematic variation of MP scatters related to the elevation angle is greatly improved for the BeiDou-3 and BeiDou-3e satellites signals. For the signals of the BeiDou-3 satellites, the order of the Root Mean Square (RMS) values of multipath and noise is B3I?<?B1I?<?B2a?<?B1C. Then, the comparison of the precise orbit determination and clock offset determination for the BeiDou-2, BeiDou-3, and BeiDou-3 experimental (BeiDou-3e) satellites was done by using 10 stations from iGMAS. The 3D precision of the 24?h orbit overlap is 24.55, 25.61, and 23.35?cm for the BeiDou-3, BeiDou-3e, and BeiDou-2 satellites, respectively. BeiDou-3 satellite has a comparable precision to that of the BeiDou-2 satellite. For the precision of clock offset estimation, the Standard Deviation (STD) of the BeiDou-3 MEO satellite is 0.350?ns, which is an improvement of 0.042?ns over that of the BeiDou-2 MEO satellite. The stabilities of the BeiDou-3 and BeiDou-3e onboard clocks are better than those of BeiDou-2 by factors of 2.84 and 1.61 at an averaging time of 1000 and 10,000?s, respectively.     

RTK model and positioning performance analysis using Galileo four-frequency observations

This paper proposes a real-time kinematic (RTK) model that uses one common reference satellite for the Galileo system with four frequency observations. In the proposed model, the double-differenced (DD) pseudorange and carrier phase biases among the different frequencies are estimated as unknown parameters to recover the integer features of the DD ambiguities among the different frequencies for ambiguity resolution and precise positioning. Analysis results show that the E5a, E5b, and E5 frequencies have virtually the same performance in terms of the positioning accuracy, observation residuals, and ratio values of ambiguity resolution. However, the E1 frequency performs worse than the E5a, E5b, and E5 frequencies. The RTK results for the combination of multiple frequencies are much better than those for a single-frequency observation, the coordinates’ standard deviation is improved about 20–30%, and the ambiguity fix time is improved about 10%.     

超临界环境下煤油替代物液滴燃烧特性数值研究

为研究液氧/煤油火箭发动机燃烧室内经喷注形成的煤油液滴的燃烧过程，基于实际气体状态方程、高压热物性修正、高压气液平衡和详细化学反应动力学，建立一维的全瞬态液滴燃烧模型，对超临界环境下两组分煤油替代物液滴的燃烧特性及液滴初始直径的影响进行仿真研究。结果表明，在超临界环境下，相比于煤油液滴纯蒸发过程，煤油液滴燃烧过程的迁移时刻大大提前；煤油液滴着火之后很快进入超临界燃烧阶段，此时液滴燃烧过程可以看成中心附近的燃料高浓度区与外侧氧气高浓度区之间的扩散燃烧过程；煤油液滴的火焰半径先增大，达到最大值之后开始减小，并减小为零，火焰温度在着火之后快速上升至最大值，并基本保持不变，在火焰半径减小为零之后开始降低；随着液滴初始直径的增大，火焰特性以及液滴中心参数变化曲线趋势不变、整体延迟，着火时间、迁移时间和液滴寿命增大。     

火箭发动机超声速过膨胀射流气动噪声特性研究

采用大涡模拟LES方法计算了火箭发动机超声速过膨胀射流形态及近场声压分布,研究了入口温度与环境温度的比值(温度比)对声场的影响;将声源分解,基于Ffowcs Williams-Hawkings (FW-H)方程获取了不同位置噪声源的远场噪声,并根据声压级频谱和湍流形态分析了超声速射流噪声的产生机理。研究表明,超声速过膨胀射流气动噪声由湍流混合噪声和宽频激波噪声组成,近场噪声源以马赫波形式向大方位角辐射中高频噪声,下游大尺度湍流向低方位角范围辐射低频噪声,声压级峰值频率随观测角度增大而升高;随温度比升高,马赫波辐射角度增大,噪声指向性发生改变。该研究可为运载火箭发动机地面试车或火箭发射段声学环境设计提供参考。     

高能(450 kV)X射线参考辐射场附加过滤研究

利用MCNP程序对450kV X光机建立模型，计算各参考辐射质下的原级谱、平均光子能量。对ISO 4037-1中已有范围的管电压与附加过滤片厚度关系曲线进行二次拟合，确定模拟厚度范围。利用MCNP计算各附加过滤组合下的平均光子能量值，并与外推法得出的平均光子能量值进行对比，将相对偏差最小时的附加过滤作为最终确定值。从部分能量点的模拟与测量结果的对比可看出，模拟得出的平均光子能量在2%以内与PTB及中国计量院测量结果保持一致，附加过滤最大相对偏差为18%。