Orbit determination of BDS-3 satellite based on regional ground tracking station and inter-satellite link observations

The BeiDou global navigation satellite system (BDS-3) has established the Ka-band inter-satellite link (ISL) to realize a two-way ranging function between satellites, which provides a new observation technology for the orbit determination of BDS-3 satellites. Therefore, this study presents a BDS satellite orbit determination model based on ground tracking station (GTS) observations and ISL ranging observations firstly to analyze the impact of the ISL ranging observations on the orbit determination of BDS-3 satellites. Subsequently, considering the data fusion processing, the variance component estimation (VCE) algorithm is applied to the parameter estimation process of the satellite orbit determination. Finally, using the measured data from China’s regional GTS observations and BDS-3 ISL ranging observations, the effects of ISL ranging observations on the orbit determination accuracy of BDS-3 satellites are analyzed. Moreover, the impact of the VCE algorithm on the fusion data processing is evaluated from the aspects of orbit determination accuracy, Ka-band hardware delay parameter stability, and ISL ranging observation residuals. The results show that for China’s regional GTSs, the addition of BDS-3 ISL ranging observations can significantly improve the orbit determination accuracy of BDS-3 satellites. The observed orbit determination accuracy of satellite radial component is improved from 48 cm to 4.1 cm. In addition, when the initial weight ratio between GTS observations and ISL ranging observations is not appropriate, the various indicators which include orbit determination accuracy, ISL hardware delay, and ISL observation residuals were observed to have improved after the adjustment of the VCE algorithm. These results validate the effectiveness of the VCE algorithm for the fusion data processing of the GTS observations and ISL ranging observations.     

导航卫星中断频次的分析方法

面向导航卫星中断频次的定量分析需求,该文分析导航卫星中断产生的主要原因,给出中断频次分析的流程,并针对分析过程中的三个关键问题,研究提出具体实施方法,包括通过相关性分析快速定位底层中断事件,通过中断树建立指标分析模型,并融合在轨数据、地面试验数据快速预估得到底层功能异常率等。最后通过示例进一步说明中断频次分析过程。该文方法已应用于北斗导航卫星工程。     

Scientific objectives and payloads of Tianwen-1, China’s first Mars exploration mission

This paper describes the scientific objectives and payloads of Tianwen-1, China’s first exploration mission to Mars. An orbiter, carrying a lander and a rover, lifted-off in July 2020 for a journey to Mars where it should arrive in February 2021. A suite of 13 scientific payloads, for in-situ and remote sensing, autonomously commanded by integrated payload controllers and mounted on the orbiter and the rover will study the magnetosphere and ionosphere of Mars and the relation with the solar wind, the atmosphere, surface and subsurface of the planet, looking at the topography, composition and structure and in particular for subsurface ice. The mission will also investigate Mars climate history. It is expected that Tianwen-1 will contribute significantly to advance our scientific knowledge of Mars.     

The propagation features of LF radio waves at topside ionosphere and their variations possibly related to Wenchuan earthquake in 2008

The artificial low frequency (LF) signals recorded at topside ionosphere from DEMETER satellite were analyzed in this paper, and the typical diurnal and seasonal variations were illustrated around 162?kHz in electric field spectra. The larger power spectrum density (PSD) values in electric field at local nighttime and in winter season all demonstrate the correlation feature of lower plasma content to higher penetration of LF waves into ionosphere. Around Wenchuan earthquake, the comparison of signal-noise-ratio (SNR) values in electric field with each half month during January to May in 2008 and the same half month in May from 2005 to 2007 revealed their lowest values and small covering area around the preparation region of Wenchuan earthquake in 2008. Combined with other researches in VLF radio waves and geochemical observations from satellite, the interaction of ion accumulation and upward movement from gas-water release at surface might be a key factor to disturb the ionospheric plasma density, and then possibly leading to the decrease of low energy penetration of LF radio waves from the artificial transmitted source at ground.     

高精度盘式永磁电机温度分析与研究

以高精度无槽盘式永磁电机为研究对象,建立了电机三维电磁仿真模型。详细分析了该电机反电动势和转矩特性,避免由高次谐波引起的定、转子及永磁体涡流损耗,有效改善了电机的热性能,为进一步研究打下基础。建立了三维温度场仿真模型,分析了热源分布和传热过程,计算了电机在自然散热条件下温度的稳态分布。最后通过电机温升试验,验证了理论分析的正确性与合理性。     

基于工程教育专业认证背景下地方特色院校“金课”建设的研究与探索

"金课"作为一项新提出不久的概念,许多重点院校和地方特色院校已经着手打造了一部分精品课程,主要是一些开放性课程和文法类课程,原因是这一类课程思维发散,教学手段多样,可以运用现代化信息技术手段采取线上线下教学模式。但是教育部推出的"金课"建设不单单只是针对于这些类课程,对于工科专业的课程建设,也需要打造"金课",尤其是以工程教育专业认证的标准和理念打造地方特色院校"金课",是我们这些地方特色工科院校需要重点研究和探索的。本文的研究重点在于如何把工程教育专业认证的理念与课程建设有机融合体现工科"金课"的"四性"。     

SiO32-浓度对KMnO4/FeSO4工艺除磷过程的影响

考察了天然水体中常见的SiO_3~(2-)对KMnO_4/FeSO_4工艺混凝除磷的影响。SiO_3~(2-)存在时KMnO_4/FeSO_4工艺混凝除磷的效能随着溶液pH的升高呈现先增加后降低的趋势。SiO_3~(2-)浓度为1.0 mmol/L,溶液pH值为4～6时,SiO_3~(2-)可促进KMnO_4/FeSO_4工艺除磷的效能,KMnO_4/FeSO_4工艺对磷的去除效果分别增加了6.0%,9.9%和6.3%;溶液pH值为7～9时,SiO_3~(2-)可显著抑制KMnO_4/FeSO_4工艺除磷的效能,KMnO_4/FeSO_4工艺对磷的去除效果分别降低了14.76%,32.6%和17.3%。KMnO_4/FeSO_4工艺形成的絮体颗粒物表面ζ电位显著降低,溶液中残余铁的量明显提高。另外,水中SiO_3~(2-)对KMnO_4/FeSO_4工艺形成的絮体颗粒物的组成和表面特征均有一定影响。该研究为KMnO_4/FeSO_4工艺混凝除磷技术的推广提供了必要的理论基础。     

一种柔性空间双臂机器人的协同控制和避障方法

针对柔性空间机械臂在轨服务应用需求，提出一种基于刚体运动与柔性振动相耦合的空间双臂机器人协同控制方法.首先引入空间位姿变量的概念，构造出面向协同控制目标的Jacobian矩阵，建立柔性空间机器人系统的刚柔耦合动力学模型，基于指定的最小距离得到其运动学逆解，并根据系统动量矩守恒关系及系统的Jacobian矩阵，并根据机械臂末端的运动速度,然后采用阻尼最小二乘法得出关节角度，使柔性空间机器人能够有效完成协同控制和空间避障任务，并基于RecurDyn V7R5软件环境验证算法的正确性.最后，基于SolidWorks和ADAMS虚拟样机建立柔性空间机器人系统的立体CAD模型，并结合空间在轨搬运任务进行模拟仿真，柔性空间机器人关节操作和运动轨迹的仿真结果图验证了本文算法的有效性.