低温推进剂空间管理技术研究进展与展望

本文介绍了低温推进剂的性能优势与空间管理挑战，梳理了低温流体空间管理(CFM)技术特征及其研究现状，建议按照重力依赖型与重力无关型分类开展技术成熟度提升研究。调研了美国逾半个世纪的CFM技术搭载实验研究历程，分析了各类平台的工作特性与性能优势。基于我国航天发展现状与未来需求，探析了我国开展CFM技术攻关、飞行搭载实验的可行方案。建议在我国载人空间站规划舱内低温技术实验柜与舱外暴露平台实验模块，加速我国CFM技术向工程应用的转化。     

适用于CEI的GEO卫星相时延解算方法及试验

为解决在实际航天任务中利用连线干涉测量(CEI)技术进行高精度GEO卫星定轨以及共位GEO卫星相对定位时面临的载波相位整周模糊度难题，提出了一种基于卫星下行信号的多弧段融合相位模糊度解算方法，它通过相邻多弧段载波相位值和窄带信号群时延值的融合处理可精确获得无模糊载波相时延观测量。对提出的方法进行了性能仿真和实际外场试验验证，结果表明：在20 km基线上，利用北斗GEO卫星的伪码测距信号和天链卫星的测控信号均成功实现了S频段解载波整周相位模糊，相时延测量精度优于0.1ns，对应GEO卫星定轨精度优于54 m。该方法在国内首次实现了在几十km基线量级上利用几百kHz窄带测控信号获得无模糊载波相时延，具有较好的工程应用前景。     

高超声速飞行器再入段LQR自抗扰控制方法设计

针对高超声速飞行器(HSV)再入过程中强非线性、强耦合、气动参数变化剧烈的不确定性的特点，提出一种基于线性二次型调节器(LQR)和自抗扰控制(ADRC)的高超声速飞行器再入段的姿态控制方法。首先，建立高超声速飞行器再入段线性化模型，并采用LQR方法完成了状态反馈控制律设计。然后，结合自抗扰控制技术，设计了扩张状态观测器(ESO)对系统的模型不确定性和外部干扰进行补偿，大幅增强了系统的扰动抑制能力。最后，将得到的高超声速飞行器再入段LQR自抗扰姿态控制器(LQRADRC)应用于高超声速飞行器六自由度仿真，仿真结果表明本文所提出的控制方法能够快速、精确地跟踪角位置指令，并且对系统不确定性具有强鲁棒性。     

星载激光通信终端在轨机动对温度影响

对激光通信终端在轨瞬态温度变化开展了仿真，以期研究在轨机动的影响、热分析和热试验时机动模式的简化模拟。通过合理地分析与简化，建立终端的轨道热分析模型，准确模拟在轨机动，根据典型机动模式、外热流和涂层退化等因素设计了计算工况，得出了终端在轨运行过程中的温度场随时间和姿态变化规律。结果表明：不同机动模式下的温度变化存在差异，最大可达23.0℃，采用固定姿态或一维转动的简化热分析或热试验不能准确模拟实际飞行温度，甚至不能部分替代二维转动热分析或热试验；光学天线和反射镜的温度控制是制约终端工作的瓶颈，为终端设计合适的避光机动策略，可大幅度提高温度稳定度和均匀度。研究结果可以为光机电设备在轨机动策略的设计和改进提供参考。     

Impact of rain on wave retrieval from Sentinel-1 synthetic aperture radar images in tropical cyclones

The main objective of our work was to investigate the impact of rain on wave observations from C-band (~5.3 GHz) synthetic aperture radar (SAR) in tropical cyclones. In this study, 10 Sentinel-1 SAR images were available from the Satellite Hurricane Observation Campaign, which were taken under cyclonic conditions during the 2016 hurricane season. The third-generation wave model, known as Simulating WAves Nearshore (SWAN) (version 41.31), was used to simulate the wave fields corresponding to these Sentinel-1 SAR images. In addition, rainfall data from the Tropical Rainfall Measuring Mission satellite passing over the spatial coverage of the Sentinel-1 SAR images were collected. The simulated results were validated against significant wave heights (SWHs) from the Jason-2 altimeter and European Centre for Medium-Range Weather Forecasts data, revealing a root mean square error (RMSE) of ~0.5 m with a 0.25 scatter index. Winds retrieved from the VH-polarized Sentinel-1 SAR images using the Sentinel-1 Extra Wide-swath Mode Wind Speed Retrieval Model after Noise Removal were taken as prior information for wave retrieval. It was discovered that rain did indeed affect the SAR wave retrieval, as evidenced by the 3.21-m RMSE of SWHs between the SAR images and the SWAN model, which was obtained for the ~1000 match-ups with raindrops. The raindrops dampened the wave retrieval when the rain rate was < ~5 mm/hr; however, they enhanced wave retrieval for higher rain rates. It was also found that the portion of the rain-induced ring wave with a wave number > 0.05 rad/m (~125 m wavelength) was clearly observed in the SAR-derived wave spectra.     

一种利用ILSP的同步DS-CDMA信号快速盲解扩算法

针对同步DS-CDMA信号的盲解扩问题，本文提出了一种基于迭代最小二乘投影算法(ILSP)的快速盲解扩算法。本算法首先通过对截获信号的协方差矩阵进行特征分解，估计出由各用户扩频序列张成的信号子空间，然后结合扩频码序列的有限符号集特性，利用ILSP算法消除由特征分解产生的酉矩阵模糊问题，得到扩频序列的精确估计，最后利用估计得到的扩频序列对截获信号解扩得到信息码序列，完成DS-CDMA信号的盲解扩。仿真结果表明本算法在低信噪比条件下具有良好的盲解扩性能，且相较传统算法本文提出算法大大降低了计算复杂度 。     

基于正交循环码的M-ary扩频解扩新算法及FPGA实现

针对基于正交循环码M-ary扩频解扩算法消耗硬件资源较多的问题,提出一种以折叠匹配滤波器为基础的算法及FPGA实现方案。选择合适的计算时钟,算法使用6个加法器和4个乘法器即可实现非相干解扩,比传统相关解扩算法节省资源,两者消耗资源之比随进制数M的增加而降低。实验结果证明了算法的正确性和有效性。     

A high-performance ground-based prototype of horn-type sequential vegetable production facility for life support system in space

Vegetable cultivation plays a crucial role in dietary supplements and psychosocial benefits of the crew during manned space flight. Here we developed a ground-based prototype of horn-type sequential vegetable production facility, named Horn-type Producer (HTP), which was capable of simulating the microgravity effect and the continuous cultivation of leaf–vegetables on root modules. The growth chamber of the facility had a volume of 0.12 m³, characterized by a three-stage space expansion with plant growth. The planting surface of 0.154 m² was comprised of six ring-shaped root modules with a fibrous ion-exchange resin substrate. Root modules were fastened to a central porous tube supplying water, and moved forward with plant growth. The total illuminated crop area of 0.567 m² was provided by a combination of red and white light emitting diodes on the internal surfaces. In tests with a 24-h photoperiod, the productivity of the HTP at 0.3 kW for lettuce achieved 254.3 g eatable biomass per week. Long-term operation of the HTP did not alter vegetable nutrition composition to any great extent. Furthermore, the efficiency of the HTP, based on the Q-criterion, was 7 × 10⁻⁴ g² m⁻³ J⁻¹. These results show that the HTP exhibited high productivity, stable quality, and good efficiency in the process of planting lettuce, indicative of an interesting design for space vegetable production.     

数控纤维缠绕机芯模处理软件的研究

给出了离散点输入芯模的数学处理过程，从而对任意给定的芯模轮廓曲线有了统一的处理方法，统了一芯模输入，为非测地线缠绕软件的输入芯模“微元化”提供了理论依据，并为后面的缠绕计算奠定了基础。