无人自转旋翼机建模与控制方法研究

以500kg级无人自转旋翼机为研究对象,研究了样例无人旋翼机的建模和自动飞行控制技术.首先,基于解析形式叶素积分法给出自转旋翼机的建模方法,并给出了样例旋翼无人机的数学模型;然后,设计了无人旋翼机的俯仰和滚转控制律,并在此基础上设计了速度、高度及侧偏控制律.最后,通过飞行试验验证了模型的准确性及控制律的有效性.     

可靠性设计优化的球空间设计法

可靠性设计优化（RBDO）在航空航天等领域已经被广泛应用，具有显著提高可靠性的效果；然而它包含两个迭代循环-总体优化循环和可靠性分析循环，双循环求解方法效率低下甚至难以承受。本文提出一种可以提高可靠性设计优化求解效率的方法-球空间设计法，该方法可以方便地表达搜索区域，最大可能失效点可以从极值点处精确获取；同时，该方法可以将总体优化以及可靠性分析同步进行。本文所提出的球空间法的有效性将通过2个算例进行测试，测试结果表明该方法不仅精度与同类方法持平，求解效率有明显提升，它将会对提高航空航天装备如卫星、火箭、飞行器等产品的可靠性提供更为有效的方法和技术支持。     

Event-triggered attitude control of spacecraft

The problem of spacecraft attitude stabilization control system with limited communication and external disturbances is investigated based on an event-triggered control scheme. In the proposed scheme, information of attitude and control torque only need to be transmitted at some discrete triggered times when a defined measurement error exceeds a state-dependent threshold. The proposed control scheme not only guarantees that spacecraft attitude control errors converge toward a small invariant set containing the origin, but also ensures that there is no accumulation of triggering instants. The performance of the proposed control scheme is demonstrated through numerical simulation.     

一种手持式太赫兹探测系统的光学及结构设计*

随着现代安检技术与健康、隐私问题之间的矛盾愈加突出,人们迫切需要高效、便捷、安全的安检技术。首先介绍太赫兹非成像光谱探测技术的原理,提出适合于安检应用的太赫兹光谱探测系统技术指标,然后基于ZEMAX设计出配合该技术指标的光学系统,采用非序列模式对其进行仿真和评价,最后基于ProE设计完成了配合上述光学系统的紧凑型探测系统结构,实现了探测系统的手持式应用。     

Orbit determination and prediction of GEO satellite of BeiDou during repositioning maneuver

In order to establish a continuous GEO satellite orbit during repositioning maneuvers, a suitable maneuver force model has been established associated with an optimal orbit determination method and strategy. A continuous increasing acceleration is established by constructing a constant force that is equivalent to the pulse force, with the mass of the satellite decreasing throughout maneuver. This acceleration can be added to other accelerations, such as solar radiation, to obtain the continuous acceleration of the satellite. The orbit determination method and strategy are illuminated, with subsequent assessment of the orbit being determined and predicted accordingly. The orbit of the GEO satellite during repositioning maneuver can be determined and predicted by using C-Band pseudo-range observations of the BeiDou GEO satellite with COSPAR ID 2010-001A in 2011 and 2012. The results indicate that observations before maneuver do affect orbit determination and prediction, and should therefore be selected appropriately. A more precise orbit and prediction can be obtained compared to common short arc methods when observations starting 1 day prior the maneuver and 2 h after the maneuver are adopted in POD (Precise Orbit Determination). The achieved URE (User Range Error) under non-consideration of satellite clock errors is better than 2 m within the first 2 h after maneuver, and less than 3 m for further 2 h of orbit prediction.     

三维全五向编织复合材料的细观结构分析

基于三维全五向矩形编织工艺的携纱器运动规律,系统研究了三维全五向编织复合材料的纱线空间运动方式、纱线间交织结构形态,建立了三维全五向编织结构各区域的单胞几何模型,推导了编织角等工艺参数与各单胞结构参数间的数学关系,计算了纤维体积分数的预测值,并与实测值相比误差较小,表明所建模型较为合理、准确.     

聚丙烯腈基碳纤维高温处理过程中石墨微晶的生长

分别采用激光拉曼光谱法(Raman)、广角X一射线衍射法(WAXD)研究并比较了聚丙烯腈基碳纤维在高温处理过程中,石墨结构形成时微晶的生长,尤其是在宽度方向上的增长规律.结果表明,在所选取的高温处理温度范围内,随着处理温度的不断提高,在石墨层面间距不断减小的同时,微晶在宽度方向上的增长基本上呈线性.拉曼光谱和X-射线衍射两种分析手段均能有效表征石墨微晶及片层结构,但由于基本空间模型的不同,两者所反映的基本结构信息有一定差别.     

来流条件对叶片表面附面层影响的实验研究

本文突破传统的附面层总压测量方法,采用附面层总压探针实现测量平面叶栅叶片表面真实的附面层内总压,实验过程中改变来流马赫数测量叶片吸力面及压力面附面层内总压,并通过相关计算获得附面层厚度的一系列参数.实验目的在于研究来流条件对平面叶栅叶片表面附面层的影响.实验结果表明:与来流马赫数相比来流攻角对附面层厚度影响较大,不同攻...     

空间相机低频隔振系统及试验验证

随着遥感卫星分辨率的提高。星上微振动对空间相机的影响越来越显著。在相机与卫星平台之间安装隔振装置,将飞轮、扫描机构等扰振源产生的振动与相机隔离开来是一种改善其工作环境的有效方法。文章介绍了针对中巴地球资源卫星研制的相机被动隔振系统,以及在地面结构星上进行的联合隔振性能测试。测试结果表明。传递至相机的两个主要扰振频率分量...