安装和不安装垂直嵌板的鸭式飞机横向稳定性研究

研究了带有和不带有伸出的垂直嵌板的鸭式飞机(Velocity-173)的横向稳定性。众所周知，鸭式飞机(Velocity—173)具有良好的纵向稳定性．但其横向稳定性比较差。为了改善其横向稳定性．设计了两种复合材料夹层板．将其安装在垂直尾翼下面．并进行了一系列的飞行试验来研究安装伸出的垂直嵌板的效果。采用解析法和实时参数估计法从飞行试验数据中提取了横向可控能力／稳定性。本的工作验证了安装垂直嵌板对横向稳定性的效果。     

A cost driven predictive maintenance policy for structural airframe maintenance

Airframe maintenance is traditionally performed at scheduled maintenance stops.The decision to repair a fuselage panel is based on a fixed crack size threshold,which allows to ensure the aircraft safety until the next scheduled maintenance stop.With progress in sensor technology and data processing techniques,structural health monitoring (SHM) systems are increasingly being considered in the aviation industry.SHM systems track the aircraft health state continuously,lead ing to the possibility of planning maintenance based on an actual state of aircraft rather than on a fixed schedule.This paper builds upon a model-based prognostics framework that the authors developed in their previous work,which couples the Extended Kalman filter (EKF) with a first order perturbation (FOP) method.By using the information given by this prognostics method,a novel cost driven predictive maintenance (CDPM) policy is proposed,which ensures the aircraft safety while minimizing the maintenance cost.The proposed policy is formally derived based on the trade-off between probabilities of occurrence of scheduled and unscheduled maintenance.A numerical case study simulating the maintenance process of an entire fleet of aircrafts is imple mented.Under the condition of assuring the same safety level,the CDPM is compared in terms of cost with two other maintenance policies:scheduled maintenance and threshold based SHM maintenance.The comparison results show CDPM could lead to significant cost savings.     

高纯α—Fe热压缩动态复原机制的研究

用高纯α-Fe在GLEEBLE-1500热模拟机上率进行了热压缩试验。变形温度分别为550℃,700℃,800℃和900℃,应变速率分别为0.001s~(-1),0.01s~(-1),0.1s~(-1),1s~(-1)和10s~(-1)。对其热压缩过程中的显微结构变化及真应力-真应变曲线进行的研究结果表明,形变温度的增加和应变速率降低有利于动态再结晶的进行;对动态再结晶与Z参数关系的研究结果表明,在一定的Z参数范围内即25<1nZ<37,高纯α-Fe可以发生动态再结晶,并给出动态再结晶图。     

混纤纱制备热塑性复合材料研究评述

对各种热塑性纤维/增强纤维混杂纤维束进行了简要的描述,指出了混纤纱法是一种很有发展前途的热塑性复合材料制备方法.概述了混纤纱的制备方法、混纤纱的编织工艺、由混纤纱制备复合材料成型工艺以及混纤热塑性复合材料的性能,并对混纤复合材料的应用和此领域中目前所存在的主要问题等进行简单概括,提出了作者自己的观点.     

Optimal deployment schedule of an active twist rotor for performance enhancement and vibration reduction in high-speed flights

The best active twist schedules exploiting various waveform types are sought taking advantage of the global search algorithm for the reduction of hub vibration and/or power required of a rotor in high-speed conditions.The active twist schedules include two non-harmonic inputs formed based on segmented step functions as well as the simple harmonic waveform input.An advanced Particle Swarm assisted Genetic Algorithm (PSGA) is employed for the optimizer.A rotorcraft Computational Structural Dynamics (CSD) code CAMRAD Ⅱ is used to perform the rotor aeromechanics analysis.A Computation Fluid Dynamics (CFD) code is coupled with CSD for verification and some physical insights.The PSGA optimization results are verified against the parameter sweep study performed using the harmonic actuation.The optimum twist schedules according to the performance and/or vibration reduction strategy are obtained and their optimization gains are compared between the actuation cases.A two-phase non-harmonic actuation schedule demonstrates the best outcome in decreasing the power required while a four-phase non-harmonic schedule results in the best vibration reduction as well as the simultaneous reductions in the power required and vibration.The mechanism of reduction to the performance gains is identified illustrating the section airloads,angle-of-attack distribution,and elastic twist deformation predicted by the present approaches.     

Experimental and numerical investigation of threedimensional vortex structures of a pitching airfoil at a transitional Reynolds number

This research examines the vortex behaviors and aerodynamic forces in dynamic stall phenomena at a transitional Reynolds number(Re = 90000) using experimental and numerical approaches.Periodic sinusoidal pitching motion at two different reduced frequencies is used to achieve the dynamic stall of a NACA 0012 airfoil.Several leading edge vortices form and detach in the dynamic stall stage.The flow then quickly transitions to a full separation zone in the stall stage when the angle of attack starts to decrease.There is discrepancy between the phaseaveraged and instantaneous flow field in that the small flow structures increased with angle of attack, which is a characteristic of the flow field at the transitional Reynolds number.The interaction between the streamwise vortices in the three-dimensional numerical results and the leading edge vortex are the main contribution to the turbulent flow.In addition, the leading edge vortex that supplies vortex lift is more stable at higher reduced frequency, which decreases the lift fluctuation in the dynamic stall stage.The leading edge vortex at higher reduced frequency is strong enough to stabilize the flow, even when the airfoil is in the down-stroke phase.     

Cardinality compensation method based on information-weighted consensus filter using data clustering for multi-target tracking

In this paper, a cardinality compensation method based on Information-weighted Consensus Filter(ICF) using data clustering is proposed in order to accurately estimate the cardinality of the Cardinalized Probability Hypothesis Density(CPHD) filter. Although the joint propagation of the intensity and the cardinality distribution in the CPHD filter process allows for more reliable estimation of the cardinality(target number) than the PHD filter, tracking loss may occur when noise and clutter are high in the measurements in a practical situation. For that reason, the cardinality compensation process is included in the CPHD filter, which is based on information fusion step using estimated cardinality obtained from the CPHD filter and measured cardinality obtained through data clustering. Here, the ICF is used for information fusion. To verify the performance of the proposed method, simulations were carried out and it was confirmed that the tracking performance of the multi-target was improved because the cardinality was estimated more accurately as compared to the existing techniques.     

Effects of coarse riblets on air flow structures over a slender delta wing using particle image velocimetry

This research investigates the aerodynamic performance and flow characteristics of a delta wing with 65° sweep angle and with coarse axial riblets,and then compares with that of a smooth-surface delta wing.Particle Image Velocimetry(PIV)were utilized to visualize the flow over the wing at 6 cross-sections upright to the wing surface and parallel to the wing span,as well as 3 longitudinal sections on the leading edge,symmetry plane,and a plane between them at Angles of Attack(AOA)=20°and 30°and Re=1.2×10~5,2.4×10~5,and 3.6×10~5.The effects of the riblets were studied on the vortices diameter,vortex breakdown location,vortices distance from the wing surface,flow lines pattern nearby the wing,circulation distribution,and separation.The results show that the textured model has a positive effect on some of the parameters related to drag reduction and lift increase.The riblets increase the flow momentum near the wing’s upper surface except near the apex.They also increase the flow momentum behind the wing.