基于工程教育专业认证背景下地方特色院校“金课”建设的研究与探索

"金课"作为一项新提出不久的概念,许多重点院校和地方特色院校已经着手打造了一部分精品课程,主要是一些开放性课程和文法类课程,原因是这一类课程思维发散,教学手段多样,可以运用现代化信息技术手段采取线上线下教学模式。但是教育部推出的"金课"建设不单单只是针对于这些类课程,对于工科专业的课程建设,也需要打造"金课",尤其是以工程教育专业认证的标准和理念打造地方特色院校"金课",是我们这些地方特色工科院校需要重点研究和探索的。本文的研究重点在于如何把工程教育专业认证的理念与课程建设有机融合体现工科"金课"的"四性"。     

遥测天线升降机构谐振频率测试方法的研究

研究设计一套遥测天线升降机构谐振频率的测试方法。经测试,遥测天线升降机构不会与天线发生共振,遥测天线谐振频率约为18Hz,升降机构垂直方向的最低谐振频率为12.82Hz,侧向方向的最低谐振频率为25.64Hz,前后方向的最低谐振频率为38.46Hz。     

Active Design Method of Tooth Profiles for Cycloid Drive Based on Meshing Efficiency

An active design method of tooth profiles for cycloid gears based on their meshing efficiency is proposed.This method takes the meshing efficiency as one of the design variables to determine the tooth profiles. The calculation method for the meshing efficiency of planetary transmission is analyzed and the equation of the meshing efficiency is deduced. Relationships between the meshing efficiency,the radius of the pin wheel and the eccentric distance are revealed. The design constraint quations and the strength constraint quations are deduced. On the basis of this,a design procedure is laid out. Some examples using different input parameters are conducted to demonstrate the feasibility of the approach. A dynamic simulation of the rigid-flexible coupling of cycloid gears is also presented. The results show that the proposed design method is more flexible to control the tooth profiles by changing the input values of the transmission efficiency.     

Research on navigation of satellite constellation based on an asynchronous observation model using X-ray pulsar

Pulsar navigation is a promising navigation method for high-altitude orbit space tasks or deep space exploration. At present, an important reason for restricting the development of pulsar navigation is that navigation accuracy is not high due to the slow update of the measurements. In order to improve the accuracy of pulsar navigation, an asynchronous observation model which can improve the update rate of the measurements is proposed on the basis of satellite constellation which has a broad space for development because of its visibility and reliability. The simulation results show that the asynchronous observation model improves the positioning accuracy by 31.48% and velocity accuracy by 24.75% than that of the synchronous observation model. With the new Doppler effects compensation method in the asynchronous observation model proposed in this paper, the positioning accuracy is improved by 32.27%, and the velocity accuracy is improved by 34.07% than that of the traditional method. The simulation results show that without considering the clock error will result in a filtering divergence.     

复合导引头目标信息融合抗干扰技术研究

复合导引头由微波制导至红外制导的过程中,受干扰条件的影响,有可能出现错误交班。为了提高导引头应对干扰的能力,设计了一种微波/红外目标信息融合抗干扰方法,该方法利用微波与红外目标信息进行关联度检测,对跟踪微波与红外运动的趋势进行在线实时判断,及时做出干扰误交班判定。在进行了干扰误交班的情况下,MATLAB数字仿真结果表明,该算法能够准确有效地给出干扰误交班判断,从而保证了在干扰环境下对目标跟踪的稳定性。     

基于遗传算法的H∞混合灵敏度导弹解耦控制器设计及加权函数选择方法研究

导弹在大攻角再入飞行过程中,偏航通道和滚动通道存在着气动交连耦合,当耦合影响较大时,采用传统的把耦合项当作随机干扰的办法来处理,容易造成系统失稳。因此采用基于H∞混合灵敏度解耦控制的方法对通道间进行解耦,对于H∞混合灵敏度加权函数,通过遗传算法优化获得,并推导了H∞混合灵敏度标准型的建立过程和遗传算法优化加权函数的步骤。应用该方法,对导弹大攻角飞行过程中通道间的解耦控制进行设计。仿真表明,对参数不确定性的耦合系统,该方法具有良好的解耦性和鲁棒稳定性。     

关于疲劳裂纹扩展数学模型的参数寻优

本文通过引入工程设计中的优化方法，分别对室内空气环境下铝合金（ＬＹ１２－ＣＺ）材料疲劳裂纹扩展的数学模型，以及环境条件下（３．５％ＮａＣｌ水溶液浸泡）该材料腐蚀疲劳裂纹扩展的数学模型进行了探讨。在已知标准试样在不同的环境下疲劳裂纹扩展实验ｄａｄＮｉ，ΔＫｉ的条件下，采用优化方法进行参数寻优，可方便地得到与其对应的疲劳裂纹扩展的ｄａｄＮ～ΔＫ最优数学模型     

Dose equivalent, absorbed dose and charge spectrum investigation in low Earth orbit.

Particle intensity, dose equivalent and absorbed dose have been measured on board the space shuttle Endeavour during STS-108 in December 2001 by Dublin Institute for Advanced Studies (DIAS). The dose estimates are based on very accurate measurements of recoils produced in CR-39 by cosmic ray primary and secondary protons and heavier nuclei and by secondary neutrons. The corresponding LET spectra were used to determine dose equivalent and absorbed dose values. Estimates of the total flux of Z > or = 2 nuclei have been undertaken and a preliminary charge spectrum was measured. Some comparisons are made with preliminary data obtained on STS-105 (ISS Expedition) and other missions using CR-39 detectors.     

通用仪器接口总线标准及软件技术的发展

叙述了通用仪器接口总线标准和软件技术的现状和未来。介绍了ＧＰＩＢ、ＶＸＩ总线，程控仪器校准命令和虚拟仪器，给出了ＧＰＩＢ标准关系图，ＧＰＩＢ软件结构以及虚拟仪器框图。