Potential Effects of Surface Temperature Variations and Disturbances and Thermal Convection on the Mars InSight HP<Superscript>3</Superscript> Heat-Flow Determination

The HP³ instrument on the InSight lander mission will measure subsurface temperatures and thermal conductivities from which heat flow in the upper few meters of the regolith at the landing site will be calculated. The parameter to be determined is steady-state conductive heat flow, but temperatures may have transient perturbations resulting from surface temperature changes and there could be a component of thermal convection associated with heat transport by vertical flow of atmospheric gases over the depth interval of measurement. The experiment is designed so that it should penetrate to a depth below which surface temperature perturbations are smaller than the required measurement precision by the time the measurements are made. However, if the measurements are delayed after landing, and/or the probe does not penetrate to the desired depth, corrections may be necessary for the transient perturbations. Thermal convection is calculated to be negligible, but these calculations are based on unknown physical properties of the Mars regolith. The effects of thermal convection should be apparent at shallow depths where transient thermal perturbations would be observed to deviate from conductive theory. These calculations were required during proposal review and their probability of predicting a successful measurement a prerequisite for mission approval. However, their uncertainties lies in unmeasured physical parameters of the Mars regolith.     

MIDACO on MINLP space applications

A numerical study on two challenging mixed-integer non-linear programming (MINLP) space applications and their optimization with MIDACO, a recently developed general purpose optimization software, is presented. These applications are the optimal control of the ascent of a multiple-stage space launch vehicle and the space mission trajectory design from Earth to Jupiter using multiple gravity assists. Additionally, an NLP aerospace application, the optimal control of an F8 aircraft manoeuvre, is discussed and solved. In order to enhance the optimization performance of MIDACO a hybridization technique, coupling MIDACO with an SQP algorithm, is presented for two of these three applications. The numerical results show, that the applications can be solved to their best known solution (or even new best solution) in a reasonable time by the considered approach. Since using the concept of MINLP is still a novelty in the field of (aero)space engineering, the demonstrated capabilities are seen as very promising.     

The InSight Mars Lander and Its Effect on the Subsurface Thermal Environment

The 2018 InSight (Interior Exploration using Seismic Investigations, Geodesy and Heat Transport) Mission has the mission goal of providing insitu data for the first measurement of the geothermal heat flow of Mars. The Heat Flow and Physical Properties Package (HP³) will take thermal conductivity and thermal gradient measurements to approximately 5 m depth. By necessity, this measurement will be made within a few meters of the lander. This means that thermal perturbations from the lander will modify local surface and subsurface temperature measurements. For HP³’s sensitive thermal gradient measurements, this spacecraft influence will be important to model and parameterize. Here we present a basic 3D model of thermal effects of the lander on its surroundings. Though lander perturbations significantly alter subsurface temperatures, a successful thermal gradient measurement will be possible in all thermal conditions by proper (\(>3~\mbox{m}\) depth) placement of the heat flow probe.     

Large Scale Flows in the Solar Convection Zone

We discuss the current theoretical understanding of the large scale flows observed in the solar convection zone, namely the differential rotation and meridional circulation. Based on multi-D numerical simulations we describe which physical processes are at the origin of these large scale flows, how they are maintained and what sets their unique profiles. We also discuss how dynamo generated magnetic field may influence such a delicate dynamical balance and lead to a temporal modulation of the amplitude and profiles of the solar large scale flows.     

AUTOMATIC FINIT EELEMENT MODELING OF A WING

研究了建立机翼有限元模型的自动化。用行列法标识结构的部件（肋、梁、蒙皮、立柱），并用简单明了的表格界面来输入所有部件的几何、网格密度、材料、载荷、边界条件等参数。设计并用ＰＣＬ（ＰＡＴＲＡＮｃｏｍｍａｎｄｌａｎｇｕａｇｅｕｎｄｅｒＰＡＴＲＡＮ６．０）编制了相应的自动化建立整个机翼有限元模型的用户化程序模块。作为算例建立了ＶＦＷ６１４机翼的有限元模型并用ＮＡＳＴＲＡＮ６８进行了计算。结果表明，本方法有效和高效。     

An environmentally sensitive dynamic human model for LSS robustness studies with the V-HAB simulation

The development of efficient and safe Life Support Systems is one of the key drivers of the Global Solar System Exploration efforts. For each task performed by Life Support Systems (LSS) a great multitude of sub-system concepts exist and the challenge is to find the optimal combination of sub-systems for a given mission scenario. On a sub-system level the Equivalent Systems Mass (ESM) trade study approach is well suited to effectively compare sub-system options. On a system level in addition to ESM data time dependent sub-system performances within an overall system must be addressed. Criteria such as system stability, controllability and effectiveness must be considered in order to be able to assess the dynamic robustness of systems designed to the averages. In an effort to establish a dynamic simulation environment for this type of LSS optimizations the “Virtual Habitat” tool (V-HAB) is being developed at the Technical University of Munich (TUM). This paper introduces the most important part of the Virtual Habitat simulation, which is the human model.     

Measurements of the radiation quality factor Q at aviation altitudes during solar minimum (2006–2008)

In radiation protection, the Q-factor has been defined to describe the biological effectiveness of the energy deposition or absorbed dose to humans in the mixed radiation fields at aviation altitudes. This particular radiation field is generated by the interactions of primary cosmic particles with the atoms of the constituents of the Earth’s atmosphere. Thus the intensity, characterized by the ambient dose equivalent rate H∗(10), depends on the flight altitude and the energy spectra of the particles, mainly protons and alpha particles, impinging on the atmosphere. These charged cosmic projectiles are deflected both by the interplanetary and the Earth’s magnetic field such that the corresponding energy spectra are modulated by these fields. The solar minimum is a time period of particular interest since the interplanetary magnetic field is weakest within the 11-year solar cycle and the dose rates at aviation altitudes reach their maximum due to the reduced shielding of galactic cosmic radiation. For this reason, the German Aerospace Center (DLR) performed repeated dosimetric on-board measurements in cooperation with several German airlines during the past solar minimum from March 2006 to August 2008. The Q-factors measured with a TEPC range from 1.98 at the equator to 2.60 in the polar region.     

Outgassing History and Escape of the Martian Atmosphere and Water Inventory

The evolution and escape of the martian atmosphere and the planet’s water inventory can be separated into an early and late evolutionary epoch. The first epoch started from the planet’s origin and lasted ～500 Myr. Because of the high EUV flux of the young Sun and Mars’ low gravity it was accompanied by hydrodynamic blow-off of hydrogen and strong thermal escape rates of dragged heavier species such as O and C atoms. After the main part of the protoatmosphere was lost, impact-related volatiles and mantle outgassing may have resulted in accumulation of a secondary CO₂ atmosphere of a few tens to a few hundred mbar around ～4–4.3 Gyr ago. The evolution of the atmospheric surface pressure and water inventory of such a secondary atmosphere during the second epoch which lasted from the end of the Noachian until today was most likely determined by a complex interplay of various nonthermal atmospheric escape processes, impacts, carbonate precipitation, and serpentinization during the Hesperian and Amazonian epochs which led to the present day surface pressure.