Capability for ozone high-precision retrieval on JEM/SMILES observation

We estimate the capability of ozone (O₃) retrieval with the Superconducting Submillimeter-Wave Limb-Emission Sounder (SMILES) instrument attached to the Exposed Facility of the Japanese Experiment Module (JEM) on the International Space Station (ISS). SMILES carries a 4-K mechanical refrigerator to cool superconducting devices in space. Since SMILES has high sensitivity thanks to the superconducting receiver, it is expected that SMILES has ability to retrieve O₃ profiles more precisely than the previous millimeter–submillimeter limb measurements from satellites.     

Motion Analysis of Trunk Using Simplified Human Model in Sagittal Plane

The mass of very small vehicles is often comparable to that of their drivers,and thus there is a greater degree of coupling between the vehicle and the driver,compared with a case for traditional vehicles.When developing small vehicles,it is necessary to give ample consideration to the dynamics of the person who ride them.Here,a model of a human body riding a small personal vehicle was constructed to investigate the dynamics of the person inside such a vehicle.Moreover,an experiment on posture maintenance by acceleration of direction of travel was conducted and the parameters for posture control were identified using agenetic algorithm.Results shows that body behavior could be successfully simulated using the proposed model,and the control parameters were effective in determining the posture maintenance characteristics of the vehicle occupant.     

Optical Calibration of Geostationary Satellite Tracking Systems

A precise calibration method for range and angle observation has been developed for eliminating the systematic error of tracking systems, thus improving the accuracy of orbit determination for geostationary satellites. The principle of calibration is based on an orbit determination employing a point of optical angle observation in addition to radio tracking observation, in which we estimate observation bias parameters simultaneously with orbital elements, including the effects of geodetic mismodelings. As shown by an actual calibration experiment in our ground station, orbit determinations is sufficiently accurate that the error of predicting satellite range falls within a few meters at four days after the day of orbit determination.     

Effect of liquid bridge form on oscillatory thermocapillary convection under 1 g and μg conditions

This study analyses the effect of temperature difference between hot and cool disk (ΔT), and non-dimensional liquid bridge volume (V/V_o) on the transition process from steady thermocapillary convection to periodic or chaotic thermocapillary convection in a liquid bridge modeled after the floating zone method under normal gravity and microgravity conditions. From normal gravity and drop shaft experiments, the difference of the regime of the steady state and the oscillatory state was clarified on the ΔT−V/V_o plane under 1 g and μg conditions. A gap or stability region was observed in the specific V/V_o range under 1 g conditions. In the gap or stable region, after the gravity changed from 1 g to μg conditions, the temperature signals showed oscillation. From these results, the critical temperature difference under the μg conditions appeared to be smaller than that under the 1 g conditions. Temperature signals were defined as 6 different types of states. The various temperature oscillatory state regimes were obtained on a ΔT−V/V_o plane under 1 g and μg conditions. Under μg conditions, in these experimental conditions, all temperature oscillatory states exhibited only the Periodic state.     

Hypergravity suppresses bone resorption in ovariectomized rats

The effects of gravity on bone metabolism are unclear, and little has been reported about the effects of hypergravity on the mature skeleton. Since low gravity has been shown to decrease bone volume, we hypothesized that hypergravity increases bone volume. To clarify this hypothesis, adult female rats were ovariectomized and exposed to hypergravity (2.9G) using a centrifugation system. The rats were killed 28 days after the start of loading, and the distal femoral metaphysis of the rats was studied. Bone architecture was assessed by micro-computed tomography (micro-CT) and bone mineral density was measured using peripheral quantitative CT (pQCT). Hypergravity increased the trabecular bone volume of ovariectomized rats. Histomorphometric analyses revealed that hypergravity suppressed both bone formation and resorption and increased bone volume in ovariectomized rats.     

Future of Venus Research and Exploration

Despite the tremendous progress that has been made since the publication of the Venus II book in 1997, many fundamental questions remain concerning Venus’ history, evolution and current geologic and atmospheric processes. The international science community has taken several approaches to prioritizing these questions, either through formal processes like the Planetary Decadal Survey in the United States and the Cosmic Vision in Europe, or informally through science definition teams utilized by Japan, Russia, and India. These questions are left to future investigators to address through a broad range of research approaches that include Earth-based observations, laboratory and modeling studies that are based on existing data, and new space flight missions. Many of the highest priority questions for Venus can be answered with new measurements acquired by orbiting or in situ missions that use current technologies, and several plausible implementation concepts have been studied and proposed for flight. However, observations needed to address some science questions pose substantial technological challenges, for example, long term survival on the surface of Venus and missions that require surface or controlled aerial mobility. Missions enabled by investments in these technologies will open the door to completely new ways of exploring Venus to provide unique insights into Venus’s past and the processes at work today.     

Hayabusa—Its technology and science accomplishment summary and Hayabusa-2

Hayabusa performed five descents last November, among which two touching-down flights were included. Actually Hayabusa made three touching-downs and one long landing on the surface of Itokawa during those two flights. This paper summarizes how series of descents were planned and operated. The contents focus their attention on the correction maneuvers planning as well as what kind of terminals with what kind of software tools were actually built and used. The project team had distilled and accumulated their experiences through the rehearsal flights and accomplished this difficult mission. This paper presents the entire story about it.     

Experimental study of impact-cratering damage on brittle cylindrical column model as a fundamental component of space architecture

The cylindrical column of brittle material processed from soil and rock is a fundamental component of architectures on the surface of solid bodies in the solar system. One of the most hazardous events for the structure is damaging by hypervelocity impacts by meteoroids and debris. In such a background, cylindrical columns made of plaster of Paris and glass-bead-sintered ceramic were impacted by spherical projectiles of nylon, glass, and steel at velocity of about 1–4.5 km/s. Measured crater radii, depth, and excavated mass expressed by a function of the cylinder radius are similar irrespective of the target material, if those parameters are normalized by appropriate parameters of the crater produced on the flat-surface target. The empirical scaling relations of the normalized crater radii and depth are provided. Using them, crater dimensions and excavated mass of crater on cylindrical surface of any radius can be predicted from the existing knowledge of those for flat surface. Recommendation for the minimum diameter of a cylinder so as to resist against a given impact is provided.     

On-orbit verification of fuel-free attitude control system for spinning solar sail utilizing solar radiation pressure

This paper introduces a new attitude control system for a solar sail, which leverages solar radiation pressure. This novel system achieves completely fuel-free and oscillation-free attitude control of a flexible spinning solar sail. This system consists of thin-film-type devices that electrically control their optical parameters such as reflectivity to generate an imbalance in the solar radiation pressure applied to the edge of the sail. By using these devices, minute and continuous control torque can be applied to the sail to realize very stable and fuel-free attitude control of the large and flexible membrane. The control system was implemented as an optional attitude control system for small solar power sail demonstrator named IKAROS (Interplanetary Kite-craft Accelerated by Radiation Of the Sun). In-orbit attitude control experiments were conducted, and the performance of the controller was successfully verified in comparison with the ground-based analytical performance estimation.     

Development status of the high-speed reentry system-DASH

Despite huge amount of data collected by the previous interplanetary spacecraft and probes, the origin and evolution of the solar system still remains unveiled due to limited information they brought back. Thus, the Institute of Space and Astronautical Science (ISAS) of Japan has been given a commitment to pave the way to an asteroid sample return mission: the MUSES-C project. A key to success is considered the reentry with hyperbolic velocity, which has not ever been demonstrated as yet. With this as background, a demonstrator of atmospheric reentry system, DASH, has been designed to demonstrate the high-speed reentry technology as a GTO piggyback mission. The capsule, identical to that of the sample return mission, can experience the targeted level of thermal environment even from the GTO by tracing a specially designed reentry trajectory. After the purpose of the mission was outlined at the last IAF symposium, the final fitting tests have been conducted in the ISAS Sagamihara Campus involving the flight model hardware. Furthermore, a series of rehearsals for recovery have been already executed. The paper describes the current mission status of the project.