Conditional sea surface statistics and their impact on geophysical sea surface parameters retrieved from SAR altimetry signals

In this study we present an analytical formulation of synthetic-aperture radar (SAR) altimetry signals including narrow banded nonlinear wave fields and conditional statistics between wave elevation displacements, horizontal wave slopes and vertical wave particle velocities. Considering the wave elevation displacements coskewness with respect to horizontal slopes leads to an analytical formulation of the electromagnetic bias within a SAR-mode altimeter stack. This formulation can be either parametrized by the significant wave height (SWH) and mean wave steepness, or in terms of the variance of vertical wave velocities. The effect of conditional vertical wave particle velocity variances with respect to the observed horizontal wave slopes close to nadir incidence angles leads to an effective reduction of the azimuth blurring of SAR-mode stacks. We present here a formulation of this effect by examining JONSWAP ocean wave spectra. In most cases this effect reduces the azimuth blurring by 10% to 30%. Additionally we investigate the effect of a nonlinear wave elevation displacement probability density function (PDF) on estimated geophysical parameters. We were able to show that including an elevation displacement skewness of 0.13 improves significantly the SWH consistency between altimetry and ECMWF Reanalysis v5 ERA5 results.All of these effects are validated with respect to ERA5 model data in the North East Atlantic region and in situ data located in the German Bight and Baltic Sea.The developed model can be used in both SAR and conventional altimetry retrackers.     

Impact of rain on wave retrieval from Sentinel-1 synthetic aperture radar images in tropical cyclones

The main objective of our work was to investigate the impact of rain on wave observations from C-band (~5.3 GHz) synthetic aperture radar (SAR) in tropical cyclones. In this study, 10 Sentinel-1 SAR images were available from the Satellite Hurricane Observation Campaign, which were taken under cyclonic conditions during the 2016 hurricane season. The third-generation wave model, known as Simulating WAves Nearshore (SWAN) (version 41.31), was used to simulate the wave fields corresponding to these Sentinel-1 SAR images. In addition, rainfall data from the Tropical Rainfall Measuring Mission satellite passing over the spatial coverage of the Sentinel-1 SAR images were collected. The simulated results were validated against significant wave heights (SWHs) from the Jason-2 altimeter and European Centre for Medium-Range Weather Forecasts data, revealing a root mean square error (RMSE) of ~0.5 m with a 0.25 scatter index. Winds retrieved from the VH-polarized Sentinel-1 SAR images using the Sentinel-1 Extra Wide-swath Mode Wind Speed Retrieval Model after Noise Removal were taken as prior information for wave retrieval. It was discovered that rain did indeed affect the SAR wave retrieval, as evidenced by the 3.21-m RMSE of SWHs between the SAR images and the SWAN model, which was obtained for the ~1000 match-ups with raindrops. The raindrops dampened the wave retrieval when the rain rate was < ~5 mm/hr; however, they enhanced wave retrieval for higher rain rates. It was also found that the portion of the rain-induced ring wave with a wave number > 0.05 rad/m (~125 m wavelength) was clearly observed in the SAR-derived wave spectra.     

自动测试系统集中互连信号优化设计

基于对自动测试系统被测设备的信号种类及数量的分析,构建了被测对象测试信号数学模型,分析了不同测试模式下的测试资源需求情况,并从提高测试系统性价比这一基本原则出发,提出了自动测试系统硬件平台测试资源优化配置的理论计算方法,对自动测试系统的工程设计具有指导意义。     

数据库开放对象的一般结构和操作

为了更精确地模拟客观世界，减少软件生成的复杂性，本文提出开放对象的数据模型，使其自身具有自组织、自我进化的能力，实质是面向对象＋人工智能＋数据库的一个模型。本文讨论了它的一般结构，开放对象的集合在子开放对象关系下构成有向图，并在对其加以适当限制做成偏序格的基础上，定义了一组开放对象的基本操作。     

光纤连接器端面研磨的技术关键

简要地介绍了连接器的生产中最关键的研磨工艺，对研磨工艺流程，研磨质量跟踪表和研磨质量指标通过实际生产过程进行研究。而且利用跟踪记录的研磨数据，并根据研磨质量的指标，找出一套最佳的研磨工艺。从而生产出高质量的连接器。     

飞机外形件三角网格模型光滑B样条曲面重建

综合考虑曲面重建时的拟合精度、曲面片拼接处的连续性和曲面的光顺性等因素,以三角网格模型的双三次B样条曲面重建为例,研究了飞机外形件三角网格模型的分片光滑B样条曲面重建方法。该方法首先采用最小二乘法逼近散乱数据,初步获得分片B样条曲面;然后将光顺准则加权到最小二乘函数中调节曲面光顺程度;最后运用罚函数法保证曲面片边界近似G1连续。将该方法应用于飞机外形件实测数据的曲面重建,误差分析结果验证了方法的有效性。     

小升阻比载人飞船返回舱的外形设计

载人飞船返回舱的外形设计要满足稳定性、操纵性、配平升阻比、最大过载、最大热流、最大总加热量、机动能力、着陆精度和容积系数等要求。小升阻比返回舱的形状以球冠倒锥形为最优。文中简要地介绍了返回舱外形的选择方法，对球冠钝度、倒锥角、大头拐角相对曲率半径、长细比和最大横截面直径等主要参数的选择作了研究，得出了定性与定量的分析结果。     

一种低RCS无人飞行器外形的气动特性实验研究

根据气动布局的基本原理,结合低RCS要求,设计了一种鸭式布局、带边条的翼身融合无人飞行器外形,实验结果表明,该外形不仅具有低RCS特征,而且具有良好的气动特性,升阻比达到8左右。     

水反应金属燃料发动机的性能调节

在水反应金属燃料发动机性能分析研究基础上,分析了壅塞式和非壅塞式发动机构型优缺点及性能调节特性,着重探讨了非壅塞式水反应金属燃料发动机燃气流量自适应调节规律和特点。计算结果分析表明,非壅塞式发动机具有水燃比自适应调节特性,且高压强指数水反应金属燃料调节效果显著。     

基于MATLAB的现代优化算法在飞行器气动外形设计中的应用

本文发展了MATLAB语言环境下的现代优化算法，包括遗传算法、模拟退火算法和基于分支联赛选择的多目标遗传算法，并用来求解高超声速飞行器气动外形参数优化问题。所研究的气动外形为带控制舵飞行器和可变弯体飞行器。在MATLAB环境下，求解了最大化升阻比的单目标优化问题和具体有两个冲突目标（最小化铰链力矩并且最大化平均操纵效率）的多目标优化问题。实际算例表明，在快速有效的气动力分析方法辅助之下，本文所发展的MATLAB现代优化算法可以在飞行器初始设计中发挥作用。本文所提供的现代优化算法是对MATLAB优化工具箱的一个有益的扩展。