空间站燃烧科学实验系统设计

建立空间站燃烧实验系统，可满足未来空间微重力燃烧实验系统需求.通过空间站微重力燃烧实验研究，可拓展空间燃烧学研究.根据所要实现的功能及燃烧实验需求，对中国空间站燃烧柜的燃烧科学实验系统进行了设计和分析.燃烧科学实验系统由8个子系统组成，是一个适合开展气、液、固多种燃料燃烧实验的综合性实验系统.考虑到强度设计要求，在完成方案设计后，对系统进行了有限元分析，并在研制的结构件上进行了力学环境实验.实验与分析结果表明，本文设计的实验系统能够满足环模实验的要求，结构合理可行.      

压电阻抗技术监测固体推进剂老化研究

为了进一步研究表面粘贴式的主动传感技术——压电阻抗技术(EMI, Electro-Mechanical Impedance)监测固体推进剂的老化,构建了基于线粘弹杆结构的一维机电耦合模型,根据粘弹性波的理论与边界条件进行分析,建立一种线粘弹结构动态模量与其机械阻抗的表征关系,并对构建的机电耦合阻抗模型进行了数值计算及试验验证。针对HTPB固体推进剂开展高温热加速老化试验及压电主动激励试验,根据监测所得导纳频谱并通过提取结构机械阻抗进行分析,结果表明:压电陶瓷片与推进剂结构在高频机电耦合运动时(300kHz,280kHz)有明显的共振现象,结构固有频率高于机电耦合共振频率,并且在200kHz～400kHz频段与700kHz～900kHz频段内,结构机械阻抗频谱峰值会因固体推进剂的热老化时间增长而降低,且与热老化时间之间满足线性关系。由此可见,压电阻抗法能够与固体推进剂在力学性能上建立表征关系,通过得到固体推进剂结构机械阻抗能够监测其老化损伤。     

Microstructure,porosity and mechanical properties of selective laser melted AlSi10Mg

Finite element modeling (FEM), microscopy, X-ray computed tomography (CT) and mechanical property tests were used to study the microstructure, porosity and mechanical properties of an AlSi10Mg alloy produced by selective laser melting (SLM). The simulation of the melt pool and thermal history under different energy densities produced an optimized result with an energy density of 44.5 J·mm⁻³. The high cooling rate during the SLM process significantly refined the previous α-Al dendrites. The growth direction of the network-like Al-Si eutectic structure at different orientations confirmed the anisotropic nature of the microstructure. Furthermore, the microhardness, tensile testing and fracture analysis results proved that there were no obvious distinctions in the strength between the transverse and longitudinal directions, and that the ductility was anisotropic, possibly due to the shape and distribution of the pores. The pores measured by X-ray CT at different energy densities confirmed that the sphericity of the pores was inversely related to pores volumes. With optimized processing conditions, the porosity of the selective laser melted sample decreased leading to the improved fabricated fuel system component via SLM.     

Applications of structural efficiency assessment method on structural-mechanical characteristics integrated design in aero-engines

In the design process of advanced aero-engines, it is necessary to carry out an effective analysis method between structural features and mechanical characteristics for a better structural optimization. Based on the structural composition and functions of aero-engines, the concept and contents of structural efficiency can reflect the relation between structural features and mechanical characteristics. In order to achieve the integrated design of structural and mechanical characteristics, one quantitative analysis method called Structural Efficiency Assessment Method (SEAM) was put forward. The structural efficiency coefficient was obtained by synthesizing the parameters to quantitatively evaluate the aero-engine structure design level. Parameterization method to evaluate structural design quality was realized. After analyzing the structural features of an actual dual-rotor system in typical high bypass ratio turbofan engines, the mechanical characteristics and structural efficiency coefficient were calculated. Structural efficiency coefficient of high-pressure rotor (0.43) is higher than that of low-pressure rotor (0.29), which directly shows the performance of the former is better, there is room for improvement in structural design of the low-pressure rotor. Thus the direction of structural optimization was pointed out. The applications of SEAM shows that the method is operational and effective in the evaluation and improvement of structural design.     

A review of friction stir joining of SiCp/Al composites

SiCp/Al composites have excellent comprehensive properties and have been widely used in aerospace, automotive industry and other fields. Due to the huge difference in performance between SiC particles and matrix alloys, traditional fusion welding methods are difficult to meet the join requirements of SiCp/Al composites. Friction stir joining (friction stir welding), as a solid phase joining process, has been proved to be a new technology with fine prospect in joining SiCp/Al composites compared with fusion welding process. Although some progress has been made in recent years, there are still full of challenges. In this paper, the research status of friction stir joining of SiCp/Al composites in recent years is expatiated, including the weldability of SiCp/Al composites, the macrostructure and the microstructure of joints, mechanical properties of joints, and tool wear and monitoring. Furthermore, the existing challenges of friction stir joining of SiCp/Al composites are summarized and the future development directions are prospected.     

不同酚醛树脂对芳纶纸蜂窝性能的影响

为研究酚醛树脂对芳纶纸蜂窝性能的影响,本文采用两种不同的酚醛树脂制备芳纶纸蜂窝芯材,对所制备蜂窝芯材的压缩性能和剪切性能进行测试,同时结合蜂窝端面树脂分布观察、树脂与芳纶纸接触角测量等方法,分析了两种树脂所制备蜂窝芯材性能出现差异的原因,结果表明：树脂中溶剂水的挥发速度、树脂与芳纶纸之间的表面张力会影响树脂在蜂窝壁上的树脂分布;蜂窝芯材树脂含量相同时,其节点两侧的树脂胶柱有利于提高蜂窝芯材压缩强度,但树脂堆积在节点后会降低蜂窝壁厚,造成蜂窝的剪切强度和模量下降。     

熔融渗硅工艺制备的SiCf/SiC复合材料微观结构与性能

SiC纤维增强SiC陶瓷基复合材料（SiC_f/SiC复合材料）在航空发动机热端部件方面具有重要应用。本文以第二代碳化硅纤维为增强材料,采用熔融渗硅工艺制备出SiC_f/SiC复合材料,测试复合材料的基本物理性能及常规力学性能,并利用Micro-CT、SEM对试样的微观结构和断面进行了表征分析。结果显示：SiC_f/SiC复合材料的体积密度为2.78 g/cm³,开气孔率小于2.0%,基体较为致密,1 200 ℃时热导率（厚度方向）为14.30 W/（m?K）,室温~1 200 ℃厚度方向和面内方向的线胀率分别为0.59%、0.56%,平均热胀系数分别为5.02×10^-6、4.73×10^-6/K;室温面内拉伸强度典型值为317 MPa,SEM显示试样断面具有明显的纤维拔出效应,弯曲强度和层间拉伸强度典型值分别达794和49 MPa。     

2. 5D 衍生结构SiO2 f / SiO2 复合材料的经向力学性能

以几种不同的2.5D衍生结构织物为增强体,制备了法向增强、经向增强及经法向增强2.5D Si O2f/Si O2复合材料,比较了上述材料与现有2.5D Si O2f/Si O2复合材料的经向力学性能,并研究了经法向增强2.5D结构复合材料中增强纱比例、纤维体积分数与材料性能之间的关系,对织物结构进行了优化。结果表明,经法向增强2.5D Si O2f/Si O2复合材料的经向力学性能较现有2.5D复合材料有显著提高,该材料在较低密度下(1.6 g/cm3),经向拉伸强度与现有材料(1.65 g/cm3)持平,且经向压缩强度接近现有材料的4.3倍。     

新型柔索式杆束结构压紧释放装置

针对空间机械臂、空间可展开天线等空间机构在收拢状态的杆束结构压紧与释放问题，提出一种基于柔性索捆绑压紧与热刀释放的新型压紧释放装置。建立了柔索式压紧释放装置锁紧状态的力学模型，分析了静态压紧和考虑惯性载荷情况下的绳索预紧力变化情况，得到了满足可靠压紧的绳索预紧力设计值。基于质量和刚度等效，设计了机械臂杆束结构力学等效件，并进行了正弦与随机振动力学试验。试验结果验证了所设计的柔索式杆束结构压紧释放装置的可行性，并可以推广到具有复杂包络的杆束结构压紧释放中。     

Multiscale eigenelement method for periodical composites: A review

Based on the eigenvector expansion idea, the Multiscale Eigenelement Method (MEM) was proposed by the author and co-workers. MEM satisfies two equivalent conditions, one condition is the equivalence of strain energy, and the other is the deformation similarity. These two equivalent conditions character the structure-preserving property of a multiscale analysis method. The equivalence of strain energy is necessary for achieving accurate macro behaviors such as lower order frequencies, while the deformation similarity is essential for predicting accurate micro behaviors such as stresses. The MEM has become a powerful multiscale method for the analysis of composite structures because of its high accuracy and efficiency. In this paper, the research advances of MEM are reviewed and all types of eigenelement methods are compared, focusing on superiorities and deficiencies from practical viewpoint. It is concluded that the eigenelement methods with smooth shape functions are more suitable for the analysis of macro behaviors such as lower order frequencies, and the eigenelement methods with piecewise shape functions are suitable for the analysis of both macro and micro behaviors.