机载托架自动校准系统的设计与实现

为了解决机载托架传统校准方法精度低、耗时、费力等问题,设计了一种高精度、高效率并且操作简单的成品托架自动校准系统。该系统运用调平精度较高的"循环多次"最高点不动调平方法,建立高精度机载托架校准的静力学数学模型,运用VC与Matlab的COM接口编程技术开发机载托架自动校准系统,并建立良好的人机交互界面。试验结果表明,利用该方法对机载托架进行校准,无论是校准精度还是校准效率都较传统方法有很大提高。     

基于改进粒子群优化模糊控制的MPPT算法研究

在光照强度和温度变化时,常规的最大功率点跟踪(MPPT)算法难以快速准确地跟踪光伏系统最大功率点。针对此问题,设计了一种改进粒子群优化算法(PSO)的模糊控制器。首先,依据常规MPPT特性,设计了一种带调整因子的模糊控制算法以快速收敛到最大功率点；然后,采用参数自适应PSO对设计的模糊控制器调整因子进行动态优化。仿真结果表明:所设计的参数自适应PSO优化模糊控制器能快速准确地跟踪最大功率点,保证了MPPT的动态响应速度和稳态精度,提高了光伏系统的工作效率。     

椭圆轨道卫星对地全球覆盖电推进控制

针对椭圆轨道卫星近/远地点的星下点对全球或特定纬度区域的访问问题，提出一种连续小推力下的对地覆盖控制策略。首先，推导了自然摄动对卫星拱线变化的影响，并探讨了进行小推力覆盖控制的必要性。然后，针对燃料消耗的优化问题，将控制方程展开成含傅里叶级数的形式，用以获得便于星上计算的解析形式的次优解，同时探讨了截取阶数与优化程度的关系。在进行拱线控制的同时，通过合理设置约束，对椭圆轨道的近地点高度进行保护，确保卫星安全运行。仿真结果表明，提出的方法能够以适当的燃料消耗代价实现椭圆轨道的近/远地点的全球覆盖控制或特定纬度区域的反复推扫，且控制力在可接受的范围内。     

基于点云数据的发动机管路最小间距计算方案

为检测整机发动机管路是否满足最小间距的设计要求,提出了一种基于点云数据的发动机管路最小间距计算方案,方案包含5个步骤:①从点云数据中划分出不同管路的数据;②基于管路点云数据的空间分布构造等间隔栅格,计算栅格中心点作为管路的趋势线数据;③在管路各趋势线数据点位置上构造垂直平面,将管路点云数据投影到最近的垂直平面上,获得各个垂直平面上呈圆弧状分布的投影点数据;④对各垂直平面上的投影点数据进行最小二乘圆拟合,得到拟合圆圆心及其半径值,将拟合圆圆心作为管路中心线数据;⑤采用遍历法计算两条管路中心线数据的最小间距,中心线最小间距分别减去两条管路的半径值则得到两条管路的表面最小间距。通过12条管路验证了方案的准确度。实验结果表明:管路最小间距偏差在-0.35~0.46mm之间,管路半径偏差在-0.08~0.22mm之间。该方案的实施有助于管路间距数字化检测的实现,且方案的计算结果具有较好的鲁棒性。      

小卫星侦察星座性能评估研究

针对小卫星侦察星座性能评估问题，从覆盖、成本和弹性三方面对小卫星侦察星座的性能指标进行研究，分别构建了考虑存储容量约束的覆盖能力评估模型、成本估计模型以及弹性能力评估模型。在覆盖能力评估模型中，将卫星存储容量作为约束条件，结合卫星覆盖几何模型分析了卫星对地侦察的工作条件，提出考虑存储容量的覆盖指标计算方法；通过小卫星成本模型(small satellite cost model,SSCM)对星座各分系统的成本进行估计；在弹性评估模型中，提出了星座性能损失率指标，并根据星座失效状态概率函数确定了不同失效状态下星座性能损失率的权重。将上述模型应用于SkySat和吉林一号星座的性能评估过程中，结果表明SkySat比吉林一号覆盖能力强、成本低，弹性差。提出的三个模型可用于评价星座优劣，为小卫星侦察星座的建设和性能评估工作提供参考。     

考虑局部遮挡的太阳能无人机能源控制

针对太阳能无人机在飞行状态下可能出现的太阳能电池局部遮挡情况，开展相应的太阳能电池最大功率点追踪算法和能源控制研究。通过将发光亮度引入相对吸引力计算过程对萤火虫算法进行改进，实现了局部阴影情况下太阳能电池最大功率点的高效追踪。以此为基础，设计了考虑局部遮挡情况下太阳能无人机的太阳能电池/蓄电池混合能源状态机控制规则。以"蒲公英I"无人机为例，建立了太阳能电池阵列模型，开展了考虑局部遮挡情况下太阳能电池最大功率点追踪仿真实验；基于"蒲公英I"飞行剖面，开展了考虑局部遮挡情况的混合能源控制仿真试验。研究结果表明：改进的萤火虫算法可以实现在局部阴影情况下太阳能电池最大功率点的有效跟踪，与萤火虫算法相比收敛时间更短、且功率波动幅度更小；采用改进萤火虫算法和状态机能源管理策略，在考虑局部遮挡的飞行状态下可以实现太阳能电池/蓄电池之间的合理功率分配与控制。     

Real-time clock comparison and monitoring with multi-GNSS precise point positioning: GPS,GLONASS and Galileo

The precise point positioning (PPP) technique is widely used in time and frequency applications. Because of the real-time service (RTS) project of the International GNSS Service, we can use the PPP technique for real-time clock comparison and monitoring. As a participant in the RTS, the Centre National d’Etudes Spatiales (CNES) implements the PPPWIZARD (Precise Point Positioning with Integer and Zero-difference Ambiguity Resolution Demonstrator) project to validate carrier phase ambiguity resolution. Unlike the Integer-PPP (IPPP) of the CNES, fixing ambiguities in the post-processing mode, the PPPWIZARD operates in the real-time mode, which is also called real-time IPPP (RT-IPPP). This paper focuses on applying the RT-IPPP for real-time clock comparison and monitoring. We review the principle of real-time clock comparison and monitoring, and introduce the methodology of the RT-IPPP technique. The observations of GPS, GLONASS and Galileo were processed for the experiments. Five processing modes were provided in the experiment to analyze the benefits of ambiguity resolution and multi-GNSS. In the clock comparison experiment, the average reduction ratios of standard deviations with respect to the G PPP mode range from 9.7% to 35.0%. In the clock monitoring experiment, G PPP mode can detect clock jumps whose magnitudes are larger than 0.9 ns. The RT-IPPP technique with GRE PPP AR (G) mode allows for the detection of any clock jumps larger than 0.6 ns. For frequency monitoring, G PPP mode allows detection of frequency changes larger than 1.1 × 10⁻¹⁴. When the RT-IPPP technique is applied, monitoring with GRE PPP AR (G) mode can detect frequency changes larger than 6.1 × 10⁻¹⁵.     

Evaluation of a regional real-time precise positioning system based on GPS/BeiDou observations in Australia

The performance of real-time (RT) precise positioning can be improved by utilizing observations from multiple Global Navigation Satellite Systems (GNSS) instead of one particular system. Since the end of 2012, BeiDou, independently established by China, began to provide operational services for users in the Asia-Pacific regions. In this study, a regional RT precise positioning system is developed to evaluate the performance of GPS/BeiDou observations in Australia in providing high precision positioning services for users. Fixing three hourly updated satellite orbits, RT correction messages are generated and broadcasted by processing RT observation/navigation data streams from the national network of GNSS Continuously Operating Reference Stations in Australia (AUSCORS) at the server side. At the user side, RT PPP is realized by processing RT data streams and the RT correction messages received. RT clock offsets, for which the accuracy reached 0.07 and 0.28?ns for GPS and BeiDou, respectively, can be determined. Based on these corrections, an accuracy of 12.2, 30.0 and 45.6?cm in the North, East and Up directions was achieved for the BeiDou-only solution after 30 min while the GPS-only solution reached 5.1, 15.3 and 15.5?cm for the same components at the same time. A further improvement of 43.7, 36.9 and 45.0 percent in the three directions, respectively, was achieved for the combined GPS/BeiDou solution. After the initialization process, the North, East and Up positioning accuracies were 5.2, 8.1 and 17.8?cm, respectively, for the BeiDou-only solution, while 1.5, 3.0, and 4.7?cm for the GPS-only solution. However, we only noticed a 20.9% improvement in the East direction was obtained for the GPS/BeiDou solution, while no improvements in the other directions were detected. It is expected that such improvements may become bigger with the increasing accuracy of the BeiDou-only solution.     

星载相控阵GNSS-R测高系统设计与实验

星载GNSS-R测高系统采用多波束相控阵天线和干涉互相关处理方式,接收北斗导航卫星和GPS导航卫星发射的L波段导航直射信号与海面反射信号,进行海面高度探测。详细介绍GNSS-R测高系统设计与实现、集成和外场试验等,外场试验不仅验证了相控阵GNSS-R测高系统功能,更重要的是验证了核心软件算法的正确性。GNSS-R测高系统适用于中尺度海洋现象的观测,可在时间和空间尺度上扩展雷达高度计的观测能力,并与之相互补充,有利于对复杂海面的中尺度结构进行较高时间分辨率的观测。GNSS-R测高仪为星载高精度海面高度探测提供了新型载荷。     

利用地月间空间站的载人登月飞行模式分析

为提高空间站利用率，降低载人登月任务成本，有效开发地月空间，研究了基于地月空间不同轨道空间站的载人登月飞行模式。首先对比直接往返登月飞行模式，对基于空间站的载人登月飞行模式进行任务分析，通过空间站将载人登月任务解耦为载人天地往返任务和登月任务两部分；其次通过轨道设计和稳定性分析提出考虑登月任务需求的地月间空间站可运行轨道和停泊点；最后建立一套飞行模式评价模型，从速度增量需求、飞行时间、空间环境、登月任务窗口、测控条件、交会对接技术难度、后续任务支持性和任务可靠性方面对6种不同位置空间站的登月飞行模式进行分析和定量评价。评价结果表明基于L2点Halo轨道空间站的载人登月飞行模式为更优飞行模式。