一种圆锥运动条件下的等效旋转矢量算法研究

传统旋转矢量姿态算法一般采用陀螺的角增量信号来构造积分算法,当应用于输出为角速率的光纤陀螺捷联系统时,通过角速率提取角增量,算法会损失一定精度。提出了一种以陀螺角速率信号与角增量信号同时作为输入的改进旋转矢量姿态算法,进一步补偿了圆锥误差,提高了计算精度。仿真结果表明,该算法与传统二子样算法相比较,计算量相当,姿态精度、速度精度、位置精度有大幅度的提升。     

基于CMPSO算法的永磁同步电机转动惯量识别研究

永磁同步电机(PMSM)是一种具有很强非线性的动态系统,在工业驱动应用中发挥着重要作用。实时辨识转动惯量对于高精度PMSM系统控制和稳定性状态监测具有重要意义,但传统转动惯量识别方法精度较低。在传统离散模型参考自适应理论基础之上,用柯西变异粒子群优化(CMPSO)算法代替待辨识参数自适律设计环节,以实现PMSM转动惯量识别。该转动惯量辨识方法充分利用了CMPSO算法的快速高效收敛性,仿真结果和试验结果表明了可行性、正确性和准确性。     

Robust model predictive control for satellite formation keeping with eccentricity/inclination vector separation

This study presents model predictive formation control based on an eccentricity/inclination vector separation strategy. Alternative collision avoidance can be accomplished by using eccentricity/inclination vectors and adding a simple goal function term for optimization process. Real-time control is also achievable with model predictive controller based on convex formulation. Constraint-tightening approach is address as well improve robustness of the controller, and simulation results are presented to verify performance enhancement for the proposed approach.     

高空发动机试车台矢量推力现场动态校准技术

根据发动机试车台矢量推力现场动态校准需求，通过系统化论证，针对试车台的技术要求及校准需求，解决发动机试车台现场实际使用和实验室校准条件不同造成的附加测量误差、试验台推力无法整体校准等问题。文中提出了利用摆锤式动态力加载装置实现标准矢量力加载的方案，为了验证设计方案的可行性，利用现有的设备研究验证校准方案，通过试验和分析给出了校准不确定度。结果表明：该方案动态性能优异，响应迅速，动态校准不确定度为2.2%，能满足高空发动机试车台矢量推力测试的需求，为后续进一步准确测试矢量推力提供了依据。     

某飞行器推力矢量试验测力装置研制

为满足某飞行器推力矢量试验的测试要求,采用两台六分量应变天平和一个空气桥组成测力装置来实现飞机全机气动力和喷管推进特性同时分别测量。基于有限元软件,对天平的应变及空气桥对天平的干扰进行了分析。结果表明:空气桥对天平力分量的干扰值优于5%,对力矩(滚转力矩除外)分量的干扰值优于15%,达到了设计指标。通过校准获得了单独天平、天平带空气桥(充压、不充压)状态下的校准公式,校准结果表明:两台天平各分量的综合加载误差均优于0.3%,天平带空气桥(充压、不充压)状态下各分量的综合加载误差优于0.5%,空气桥对天平的干扰量值与有限元分析结果一致。理论分析与实测结果证明:研制的天平及空气桥达到了预定目标,它的测量精准度高,满足推力矢量风洞试验需求。     

表贴式永磁同步电机直接转矩控制变幅值预测控制研究

基于以电压矢量幅值为变量的表贴式永磁同步电机(SPMSM)磁链和转矩方程,采用预测控制计算得出施加不同电压矢量幅值的下一时刻磁链和转矩值,选择使磁链和转矩误差目标函数最小的电压矢量幅值作为最优值,从而确定下一时刻施加的电压矢量。仿真结果表明:在电压矢量变幅值预测下,SPMSM直接转矩控制(DTC)系统运行良好,定子磁链轨迹为理想圆,磁链和转矩均符合控制要求,转速跟踪良好,定子电流波形正弦。预测控制需要从备选电压矢量幅值集合中选择最优幅值。理论上,备选电压矢量幅值个数越多,系统优化效果越好,但也带来更大的计算负担。研究了9种等分电压矢量情况下变幅值预测控制系统的控制效果。根据控制效果和计算负担,提出变幅值预测控制将电压矢量幅值三等分较为理想。     

基于双变量预测控制的表贴式永磁同步电机直接转矩控制系统

基于电压矢量幅值和相角为变量的表贴式永磁同步电机(SPMSM)定子磁链幅值和转矩表达式,给出了9个不同幅值和相角的备选电压矢量,采用预测控制计算得出施加不同电压矢量下一时刻的定子磁链幅值和转矩值,建立了基于磁链和转矩误差的目标函数,并选择使目标函数最小的电压矢量为作为下一时刻施加的最优电压矢量。仿真结果表明:在双变量预测控制下,SPMSM直接转矩控制系统运行良好,定子磁链轨迹为理想圆,磁链和转矩均符合控制要求,转速跟踪良好,定子电流波形正弦。进一步对比分析表明:与开关表和固定电压矢量选择策略相比,双变量预测控制能显著减小转矩和磁链脉动。与开关表相比,转矩脉动均方根误差降低了62.92%,磁链脉动均方根误差降低了45.05%,评价函数均值降低了60.30%；与固定电压矢量选择策略相比,转矩脉动均方根误差降低了22.40%,磁链脉动均方根误差降低了3.85%,评价函数均值降低了15.93%。     

A boundary vector cell model of place field repetition

Hippocampal place cells are thought to form the neural substrate of a global cognitive map. However, in multicompartment mazes, these cells exhibit locally repeating representations, undermining the global cognitive map view of place cells. This phenomenon appears to be related to the repetitive layout of these mazes, but still no hypothesis adequately explains it. Here, we use a boundary vector cell (BVC) model of place cell firing to model the activity of place cells in numerous multicompartment environments. The activity of modeled place cells bears a striking resemblance to experimental data, replicating virtually every major experimental result. Our results support the BVC model and indicate that locally repeating place cell firing could result purely from local geometry.     

Thrusting maneuver control of a small spacecraft via only gimbaled-thruster scheme

The thrust vector control (TVC) scheme is a powerful method in spacecraft attitude control. Since the control of a small spacecraft is being studied here, a solid rocket motor (SRM) should be used instead of a liquid propellant motor. Among the TVC methods, gimbaled-TVC as an efficient method is employed in this paper. The spacecraft structure is composed of a body and a gimbaled-SRM where common attitude control systems such as reaction control system (RCS) and spin-stabilization are not presented. A nonlinear two-body model is considered for the characterization of the gimbaled-thruster spacecraft where, the only control input is provided by a gimbal actuator. The attitude of the spacecraft is affected by a large exogenous disturbance torque which is generated by a thrust vector misalignment from the center of mass (C.M). A linear control law is designed to stabilize the spacecraft attitude while rejecting the mentioned disturbance torque. A semi-analytical formulation of the region of attraction (RoA) is developed to ensure the local stability and fast convergence of the nonlinear closed-loop system. Simulation results of the 3D maneuvers are included to show the applicability of this method for use in a small spacecraft.     

基于空间电压矢量的软起动器变频阶段的优化及仿真

对于空间电压矢量软起动器变频阶段的负相转矩和转速振荡问题,依据电压矢量的控制方法,对频率转换点的选取实行优化。以电机负载状况来获取各个变频阶段的控制角初始值,以恒压频比原则获取控制角终值,以此对软起动器变频阶段的控制进行优化。最后对优化后的软起动器进行仿真验证,结果显示,软起动器工作在变频阶段时,在频率转换点出现的转速超调得到了改善,电流峰值有所减小,没有负转矩出现。