纤维缠绕不等极孔椭球类容器的应力分析及优化

基于微分几何推导出了不等极孔椭球类容器纤维缠绕的非测地线稳定缠绕方程,并根据薄膜理 论、层合板理论、蔡-吴失效准则得到了赤道处纤维层的最小厚度1. 281 7 mm,计算出的纤维方向的应力小于 纤维的极限强度3. 92 GPa。发现纤维缠绕椭球容器的应力状态是赤道处最先发生破坏,且会出现局部失效现 象。以缠绕层最小质量M 为目标函数,蔡-吴失效准则为约束条件,在给定内压5 MPa 的情况下,得到了优化 后的容器质量为34. 072 kg。相比于等极孔的容器而言,非测地线缠绕具有高度非线性、不稳定性及精度难以 控制等问题。     

超临界机组末级叶片典型截面的叶型设计

针对超临界机组末级长叶片的设计特点,采用遗传算法和人工神经网络,提出对长叶片典型截面叶型进行分区优化设计思想,并对原型与改型进行了多工况点的数值计算,结果表明,将叶型吸力侧后半段由直线型改为内凹型,能够显著降低超声速叶型在超声速工况范围内的叶型损失。对叶型前缘以及压力侧的局部优化设计能够改善超声速叶型在临界马赫数工况下的气动性能。优化设计最大程度地减小了样本空间,提高了优化效率。     

接触问题形状优化的边界元法及其工程应用

提出一种用边界元法对平面弹性接触问题进行形状优化的设计分析方法。讨论了平面接触问题形状优化中设计变量的选取、形状描述的方法以及目标函数和约束条件的确定,进行了灵敏度和形状优化的算例考核,并对航空发动机枞树形榫头／榫槽进行了形状优化设计的应用分析。     

区域多重覆盖Walker星座

本文提出一种新的卫星星座优化方法,得出最优的区域覆盖星座,并给出了应用实例。      

纤维缠绕结构的一种可靠性优化设计方法研究

将纽曼级数展开的蒙特卡罗随机有限元应用于具有随机因素的纤维缠绕结构的应力求解;然后利用蒙特卡罗直接比较法和蔡希布（Ｔｓａｉ－Ｈｉｌｌ）失效判据给出该结构的可靠性算式,最后建立了此类结构的可靠性优化设计迭代法,并给出了一算例。     

火箭结构估重与总体优化设计的数字化实现及应用

火箭新型号总体方案论证时,一般借鉴国内外相近规模和相同推进剂火箭的结构系数进行类比确定子级结构系数,按照比例系数分配贮箱和壳段等部段的质量,但该质量分配不能反映载荷对结构设计的影响,在细化迭代设计中易造成方案无法闭环,导致设计工作反复。为了加快总体方案论证,提出一种基于载荷的箭体结构快速估重方法,开发形成结构估重数字化模块并嵌入总体设计平台。应用案例表明,提出的数字化估重平台能够有效提高估重精度,同时显著缩短论证周期,兼具总体方案比较和优化、全箭质量管理等功能,能有效降低方案推翻重新设计的风险,在新型号总体方案论证中发挥了重要作用。     

Time suboptimal formation flying manoeuvres through improved magnetic charged system search

The development of fast and reliable optimization algorithms is required in order to obtain real-time optimal trajectory on-board spacecraft. In addition, the wide spread of small satellites, due to their low costs, is leading to a greater number of satellite formations in space. This paper presents an Improved version of the Magnetic Charged System Search (IMCSS) metaheuristic algorithm to compute time-suboptimal manoeuvres for satellite formation flying. The proposed algorithm exploits some strategies aimed at improving the convergence to the optimum, such as the chaotic local search and the boundary handling technique, and it is able to self-tune its internal parameters and coefficients. Moreover, the inverse dynamics technique and the differential flatness approach, through the B-splines curves, are used to approximate the trajectory. The optimization procedure is applied to the circular J2 relative model developed by Schweighart and Sedwick and to the elliptical relative motion model developed by Yamanaka and Ankersen. The results of this paper show that the convergence is better achieved by using the proposed tools, thus proving the efficiency and reliability of the algorithm in solving some space engineering problems.     

State of art on energy management strategy for hybrid-powered unmanned aerial vehicle

New energy sources such as solar energy and hydrogen energy have been applied to the Unmanned Aerial Vehicle(UAV), which could be formed as the hybrid power sources due to the requirement of miniaturization, lightweight, and environmental protection issue for UAV. Hybrid electrical propulsion technology has been used in UAV and it further enforces this trend for the evolution to the Hybrid-Powered System(HPS). In order to realize long endurance flight mission and improve the energy efficiency of UAV, many researching works are focused on the Energy Management Strategy(EMS) of the HPS with digital simulation, ground demonstration platforms and a few flight tests for the UAV in recent years. energy management strategy, in which off-line or on-line control algorithms acted as the core part, could optimize dynamic electrical power distribution further and directly affect the efficiency and fuel economy of hybrid-powered system onboard.In order to give the guideline for this emerging technology for UAV, this paper presents a review of the topic highlighting energy optimal management strategies of UAV. The characteristics of typical new energy sources applied in UAV are summarized firstly, and then the classification and analysis of the architecture for hybrid power systems in UAV are presented. In the context of new energy sources and configuration of energy system, a comprehensive comparison and analysis for the state of art of EMS are presented, and the various levels of complexity and accuracy of EMS are considered in terms of real time, computational burden and optimization performance based on the optimal control and operational modes of UAV. Finally, the tendency and challenges of energy management strategy applied to the UAV have been forecasted.     

跨声速涡轮叶栅两点优化目标函数研究

针对跨声速涡轮叶栅单点优化方法难以获得整体工况性能提升、多点优化方法难以确定合理目标函数形式的问题，提出了两点优化的方法。为了节约优化时间成本，优化过程采用EIF （Equivalent inviscid flow） 模型进行数值模拟，通过添加惩罚函数保证叶栅满足设计流量和负荷要求，并采用叶栅效率线性平均的目标函数形式进行评价。选择两组跨声速涡轮叶栅进行优化设计，并利用CFD方法分析叶型变化对流场马赫数、激波和损失产生的影响。结果显示，所提出的优化设计方法在保证设计工况性能的同时，能够提升叶栅整体工况性能。通过流场分析，揭示了激波结构变化对不同工况损失影响的定性规律。综合全文研究后，给出了一种适用于跨声速涡轮叶栅两点优化设计的目标函数形式。     

Effects of stability margin and thrust specific fuel consumption constrains on multi-disciplinary optimization for blended-wing-body design

Blended-Wing-Body(BWB) configuration, as an innovative transport concept, has become a worldwide research focus in the field of civil transports development. Relative to the conventional Tube-And-Wing(TAW) configuration, the BWB shows integrated benefits and serves as a most promising candidate for future ‘‘green aviation". The objective of the present work is to figure out the effects of the stability margin and Thrust Specific Fuel Consumption(TSFC) on the BWB design in the framework of Multi-Disciplinary Optimization(MDO). A physically-based platform was promoted to study the effect static stability margin and engine technology level. Low-order physically based models are applied to the evaluation of the weight and the aerodynamic performance. The modules and methods are illustrated in detail, and the validation of the methods shows feasibility and confidence for the conceptual design of BWB aircrafts. In order to find out the relation between planform changes and the selection of stability and engine technology level, two sets of optimizations are conducted separately. The study proves that these two factors have dominant effects towards the optimized BWB designs in both aerodynamic shapes, weight distribution, which needs to be considered during the MDO design process. A balance diagram analysis is applied to find out a reasonable static stability margin range. It can be concluded that a recommended stability margin of a practical BWB commercial aircraft can be half of that of a conventional TAW design.